From: Xu Jiucheng <B37781@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>, <galak@kernel.crashing.org>
Cc: Matthew McClintock <msm@freescale.com>
Subject: Re: [SDK v1.2][PATCH 1/2 v3] powerpc/85xx: Add dts for P1021RDB-PC board
Date: Tue, 10 Jan 2012 15:22:30 +0800 [thread overview]
Message-ID: <1326180150.1895.11.camel@xujc-desktop> (raw)
In-Reply-To: <1326092022-10085-1-git-send-email-B37781@freescale.com>
I'm sorry, please ignore this email.
Thanks & Best Regards
Jiucheng
=E5=9C=A8 2012-01-09Mon=E7=9A=84 14:53 +0800=EF=BC=8CXu Jiucheng=E5=86=99=
=E9=81=93=EF=BC=9A
> P1021RDB-PC Overview
> -----------------
> 1Gbyte DDR3 (on board DDR)
> 16Mbyte NOR flash
> 32Mbyte eSLC NAND Flash
> 256 Kbit M24256 I2C EEPROM
> 128 Mbit SPI Flash memory
> Real-time clock on I2C bus
> SD/MMC connector to interface with the SD memory card
> PCIex
> - x1 PCIe slot or x1 PCIe to dual SATA controller
> - x1 mini-PCIe slot
> USB 2.0
> - ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic=E2=80=99=
s GL850A
> - Two USB2.0 Type A receptacles
> - One USB2.0 signal to Mini PCIe slot
> eTSEC1: Connected to RGMII PHY VSC7385
> eTSEC2: Connected to SGMII PHY VSC8221
> eTSEC3: Connected to SGMII PHY AR8021
> DUART interface: supports two UARTs up to 115200 bps for console displa=
y
>=20
> Signed-off-by: Matthew McClintock <msm@freescale.com>
> Signed-off-by: Xu Jiucheng <B37781@freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/p1021si-post.dtsi | 4 +
> arch/powerpc/boot/dts/p1021rdb.dts | 96 +++++++++++
> arch/powerpc/boot/dts/p1021rdb.dtsi | 236 +++++++++++++++++++=
++++++++
> arch/powerpc/boot/dts/p1021rdb_36b.dts | 96 +++++++++++
> 4 files changed, 432 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/p1021rdb.dts
> create mode 100644 arch/powerpc/boot/dts/p1021rdb.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1021rdb_36b.dts
>=20
> diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc=
/boot/dts/fsl/p1021si-post.dtsi
> index 38ba54d..b7929c9 100644
> --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
> @@ -144,6 +144,10 @@
> /include/ "pq3-usb2-dr-0.dtsi"
> =20
> /include/ "pq3-esdhc-0.dtsi"
> + sdhc@2e000 {
> + sdhci,auto-cmd12;
> + };
> +
> /include/ "pq3-sec3.3-0.dtsi"
> =20
> /include/ "pq3-mpic.dtsi"
> diff --git a/arch/powerpc/boot/dts/p1021rdb.dts b/arch/powerpc/boot/dts=
/p1021rdb.dts
> new file mode 100644
> index 0000000..90b6b4c
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/p1021rdb.dts
> @@ -0,0 +1,96 @@
> +/*
> + * P1021 RDB Device Tree Source
> + *
> + * Copyright 2011 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above copyrigh=
t
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyr=
ight
> + * notice, this list of conditions and the following disclaimer =
in the
> + * documentation and/or other materials provided with the distri=
bution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote p=
roducts
> + * derived from this software without specific prior written per=
mission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free Softwar=
e
> + * Foundation, either version 2 of that License or (at your option) an=
y
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND AN=
Y
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE I=
MPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR=
ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CA=
USED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE U=
SE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/include/ "fsl/p1021si-pre.dtsi"
> +/ {
> + model =3D "fsl,P1021RDB";
> + compatible =3D "fsl,P1021RDB-PC";
> +
> + memory {
> + device_type =3D "memory";
> + };
> +
> + lbc: localbus@ffe05000 {
> + reg =3D <0 0xffe05000 0 0x1000>;
> +
> + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
> + ranges =3D <0x0 0x0 0x0 0xef000000 0x01000000
> + 0x1 0x0 0x0 0xff800000 0x00040000
> + 0x2 0x0 0x0 0xffb00000 0x00020000>;
> + };
> +
> + soc: soc@ffe00000 {
> + ranges =3D <0x0 0x0 0xffe00000 0x100000>;
> + };
> +
> + pci0: pcie@ffe09000 {
> + ranges =3D <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
> + reg =3D <0 0xffe09000 0 0x1000>;
> + pcie@0 {
> + ranges =3D <0x2000000 0x0 0xa0000000
> + 0x2000000 0x0 0xa0000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + pci1: pcie@ffe0a000 {
> + reg =3D <0 0xffe0a000 0 0x1000>;
> + ranges =3D <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
> + pcie@0 {
> + ranges =3D <0x2000000 0x0 0x80000000
> + 0x2000000 0x0 0x80000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + qe: qe@ffe80000 {
> + ranges =3D <0x0 0x0 0xffe80000 0x40000>;
> + reg =3D <0 0xffe80000 0 0x480>;
> + brg-frequency =3D <0>;
> + bus-frequency =3D <0>;
> + };
> +};
> +
> +/include/ "p1021rdb.dtsi"
> +/include/ "fsl/p1021si-post.dtsi"
> diff --git a/arch/powerpc/boot/dts/p1021rdb.dtsi b/arch/powerpc/boot/dt=
s/p1021rdb.dtsi
> new file mode 100644
> index 0000000..22ecb6e
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/p1021rdb.dtsi
> @@ -0,0 +1,236 @@
> +/*
> + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges=
)
> + *
> + * Copyright 2011 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above copyrigh=
t
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyr=
ight
> + * notice, this list of conditions and the following disclaimer =
in the
> + * documentation and/or other materials provided with the distri=
bution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote p=
roducts
> + * derived from this software without specific prior written per=
mission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free Softwar=
e
> + * Foundation, either version 2 of that License or (at your option) an=
y
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND =
ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE I=
MPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR=
ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CA=
USED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE U=
SE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +&lbc {
> + nor@0,0 {
> + #address-cells =3D <1>;
> + #size-cells =3D <1>;
> + compatible =3D "cfi-flash";
> + reg =3D <0x0 0x0 0x1000000>;
> + bank-width =3D <2>;
> + device-width =3D <1>;
> +
> + partition@0 {
> + /* This location must not be altered */
> + /* 256KB for Vitesse 7385 Switch firmware */
> + reg =3D <0x0 0x00040000>;
> + label =3D "NOR Vitesse-7385 Firmware";
> + read-only;
> + };
> +
> + partition@40000 {
> + /* 256KB for DTB Image */
> + reg =3D <0x00040000 0x00040000>;
> + label =3D "NOR DTB Image";
> + };
> +
> + partition@80000 {
> + /* 3.5 MB for Linux Kernel Image */
> + reg =3D <0x00080000 0x00380000>;
> + label =3D "NOR Linux Kernel Image";
> + };
> +
> + partition@400000 {
> + /* 11MB for JFFS2 based Root file System */
> + reg =3D <0x00400000 0x00b00000>;
> + label =3D "NOR JFFS2 Root File System";
> + };
> +
> + partition@f00000 {
> + /* This location must not be altered */
> + /* 512KB for u-boot Bootloader Image */
> + /* 512KB for u-boot Environment Variables */
> + reg =3D <0x00f00000 0x00100000>;
> + label =3D "NOR U-Boot Image";
> + };
> + };
> +
> + nand@1,0 {
> + #address-cells =3D <1>;
> + #size-cells =3D <1>;
> + compatible =3D "fsl,p1020-fcm-nand",
> + "fsl,elbc-fcm-nand";
> + reg =3D <0x1 0x0 0x40000>;
> +
> + partition@0 {
> + /* This location must not be altered */
> + /* 1MB for u-boot Bootloader Image */
> + reg =3D <0x0 0x00100000>;
> + label =3D "NAND U-Boot Image";
> + read-only;
> + };
> +
> + partition@100000 {
> + /* 1MB for DTB Image */
> + reg =3D <0x00100000 0x00100000>;
> + label =3D "NAND DTB Image";
> + };
> +
> + partition@200000 {
> + /* 4MB for Linux Kernel Image */
> + reg =3D <0x00200000 0x00400000>;
> + label =3D "NAND Linux Kernel Image";
> + };
> +
> + partition@600000 {
> + /* 4MB for Compressed Root file System Image */
> + reg =3D <0x00600000 0x00400000>;
> + label =3D "NAND Compressed RFS Image";
> + };
> +
> + partition@a00000 {
> + /* 7MB for JFFS2 based Root file System */
> + reg =3D <0x00a00000 0x00700000>;
> + label =3D "NAND JFFS2 Root File System";
> + };
> +
> + partition@1100000 {
> + /* 15MB for User Writable Area */
> + reg =3D <0x01100000 0x00f00000>;
> + label =3D "NAND Writable User area";
> + };
> + };
> +
> + L2switch@2,0 {
> + #address-cells =3D <1>;
> + #size-cells =3D <1>;
> + compatible =3D "vitesse-7385";
> + reg =3D <0x2 0x0 0x20000>;
> + };
> +};
> +
> +&soc {
> + i2c@3000 {
> + rtc@68 {
> + compatible =3D "pericom,pt7c4338";
> + reg =3D <0x68>;
> + };
> + };
> +
> + spi@7000 {
> + flash@0 {
> + #address-cells =3D <1>;
> + #size-cells =3D <1>;
> + compatible =3D "spansion,s25sl12801";
> + reg =3D <0>;
> + spi-max-frequency =3D <40000000>; /* input clock */
> +
> + partition@u-boot {
> + /* 512KB for u-boot Bootloader Image */
> + reg =3D <0x0 0x00080000>;
> + label =3D "SPI Flash U-Boot Image";
> + read-only;
> + };
> +
> + partition@dtb {
> + /* 512KB for DTB Image */
> + reg =3D <0x00080000 0x00080000>;
> + label =3D "SPI Flash DTB Image";
> + };
> +
> + partition@kernel {
> + /* 4MB for Linux Kernel Image */
> + reg =3D <0x00100000 0x00400000>;
> + label =3D "SPI Flash Linux Kernel Image";
> + };
> +
> + partition@fs {
> + /* 4MB for Compressed RFS Image */
> + reg =3D <0x00500000 0x00400000>;
> + label =3D "SPI Flash Compressed RFSImage";
> + };
> +
> + partition@jffs-fs {
> + /* 7MB for JFFS2 based RFS */
> + reg =3D <0x00900000 0x00700000>;
> + label =3D "SPI Flash JFFS2 RFS";
> + };
> + };
> + };
> +
> + usb@22000 {
> + phy_type =3D "ulpi";
> + };
> +
> + mdio@24000 {
> + phy0: ethernet-phy@0 {
> + interrupt-parent =3D <&mpic>;
> + interrupts =3D <3 1>;
> + reg =3D <0x0>;
> + };
> +
> + phy1: ethernet-phy@1 {
> + interrupt-parent =3D <&mpic>;
> + interrupts =3D <2 1>;
> + reg =3D <0x1>;
> + };
> +
> + tbi0: tbi-phy@11 {
> + reg =3D <0x11>;
> + device_type =3D "tbi-phy";
> + };
> + };
> +
> + mdio@25000 {
> + tbi1: tbi-phy@11 {
> + reg =3D <0x11>;
> + device_type =3D "tbi-phy";
> + };
> + };
> +
> + mdio@26000 {
> + tbi2: tbi-phy@11 {
> + reg =3D <0x11>;
> + device_type =3D "tbi-phy";
> + };
> + };
> +
> + enet0: ethernet@b0000 {
> + fixed-link =3D <1 1 1000 0 0>;
> + phy-connection-type =3D "rgmii-id";
> +
> + };
> +
> + enet1: ethernet@b1000 {
> + phy-handle =3D <&phy0>;
> + tbi-handle =3D <&tbi1>;
> + phy-connection-type =3D "sgmii";
> + };
> +
> + enet2: ethernet@b2000 {
> + phy-handle =3D <&phy1>;
> + tbi-handle =3D <&tbi2>;
> + phy-connection-type =3D "rgmii-id";
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/p1021rdb_36b.dts b/arch/powerpc/boot=
/dts/p1021rdb_36b.dts
> new file mode 100644
> index 0000000..ea6d8b5
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/p1021rdb_36b.dts
> @@ -0,0 +1,96 @@
> +/*
> + * P1021 RDB Device Tree Source (36-bit address map)
> + *
> + * Copyright 2011 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions =
are met:
> + * * Redistributions of source code must retain the above copyrigh=
t
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyr=
ight
> + * notice, this list of conditions and the following disclaimer =
in the
> + * documentation and/or other materials provided with the distri=
bution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote p=
roducts
> + * derived from this software without specific prior written per=
mission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of =
the
> + * GNU General Public License ("GPL") as published by the Free Softwar=
e
> + * Foundation, either version 2 of that License or (at your option) an=
y
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND AN=
Y
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE I=
MPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE =
ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR=
ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL =
DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR =
SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CA=
USED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, =
OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE U=
SE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/include/ "fsl/p1021si-pre.dtsi"
> +/ {
> + model =3D "fsl,P1021RDB";
> + compatible =3D "fsl,P1021RDB-PC";
> +
> + memory {
> + device_type =3D "memory";
> + };
> +
> + lbc: localbus@fffe05000 {
> + reg =3D <0xf 0xffe05000 0 0x1000>;
> +
> + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
> + ranges =3D <0x0 0x0 0xf 0xef000000 0x01000000
> + 0x1 0x0 0xf 0xff800000 0x00040000
> + 0x2 0x0 0xf 0xffb00000 0x00020000>;
> + };
> +
> + soc: soc@fffe00000 {
> + ranges =3D <0x0 0xf 0xffe00000 0x100000>;
> + };
> +
> + pci0: pcie@fffe09000 {
> + ranges =3D <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
> + reg =3D <0xf 0xffe09000 0 0x1000>;
> + pcie@0 {
> + ranges =3D <0x2000000 0x0 0xa0000000
> + 0x2000000 0x0 0xa0000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + pci1: pcie@fffe0a000 {
> + reg =3D <0xf 0xffe0a000 0 0x1000>;
> + ranges =3D <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
> + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
> + pcie@0 {
> + ranges =3D <0x2000000 0x0 0xc0000000
> + 0x2000000 0x0 0xc0000000
> + 0x0 0x20000000
> +
> + 0x1000000 0x0 0x0
> + 0x1000000 0x0 0x0
> + 0x0 0x100000>;
> + };
> + };
> +
> + qe: qe@fffe80000 {
> + ranges =3D <0x0 0xf 0xffe80000 0x40000>;
> + reg =3D <0xf 0xffe80000 0 0x480>;
> + brg-frequency =3D <0>;
> + bus-frequency =3D <0>;
> + };
> +};
> +
> +/include/ "p1021rdb.dtsi"
> +/include/ "fsl/p1021si-post.dtsi"
prev parent reply other threads:[~2012-01-10 7:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-09 6:53 [SDK v1.2][PATCH 1/2 v3] powerpc/85xx: Add dts for P1021RDB-PC board Xu Jiucheng
2012-01-09 6:53 ` [SDK v1.2][PATCH 2/2 v3] powerpc/85xx: Added P1021RDB-PC Platform support Xu Jiucheng
2012-01-10 7:23 ` Xu Jiucheng
2012-01-09 20:54 ` [SDK v1.2][PATCH 1/2 v3] powerpc/85xx: Add dts for P1021RDB-PC board Scott Wood
2012-01-10 7:17 ` Xu Jiucheng
2012-01-10 7:22 ` Xu Jiucheng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1326180150.1895.11.camel@xujc-desktop \
--to=b37781@freescale.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=msm@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).