From: Ramneek Mehresh <ramneek.mehresh@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: devicetree-discuss@lists.ozlabs.org,
Ramneek Mehresh <ramneek.mehresh@freescale.com>
Subject: [PATCH] powerpc/85xx:Add dr_mode property in USB nodes
Date: Wed, 18 Jan 2012 12:18:46 +0530 [thread overview]
Message-ID: <1326869326-4271-1-git-send-email-ramneek.mehresh@freescale.com> (raw)
Add usb2 controller node for P1020RDB, P2020RDB, P2020DS, P1021MDS
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
---
Applies on git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
(branch next)
arch/powerpc/boot/dts/p1020rdb.dtsi | 2 ++
arch/powerpc/boot/dts/p1021mds.dts | 3 ++-
arch/powerpc/boot/dts/p2020ds.dtsi | 3 ++-
arch/powerpc/boot/dts/p2020rdb.dts | 3 ++-
4 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
index 17559c4..1fb7e0e 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -190,6 +190,7 @@
usb@22000 {
phy_type = "ulpi";
+ dr_mode = "host";
};
/* USB2 is shared with localbus. It is used
@@ -197,6 +198,7 @@
appropriate device-tree fixup done by uboot */
usb@23000 {
phy_type = "ulpi";
+ dr_mode = "host";
};
mdio@24000 {
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index d954079..97116f1 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -1,7 +1,7 @@
/*
* P1021 MDS Device Tree Source
*
- * Copyright 2010 Freescale Semiconductor Inc.
+ * Copyright 2010,2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -151,6 +151,7 @@
usb@22000 {
phy_type = "ulpi";
+ dr_mode = "host";
};
mdio@24000 {
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
index c1cf6ce..d3b939c 100644
--- a/arch/powerpc/boot/dts/p2020ds.dtsi
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -1,7 +1,7 @@
/*
* P2020DS Device Tree Source stub (no addresses or top-level ranges)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -134,6 +134,7 @@
&board_soc {
usb@22000 {
phy_type = "ulpi";
+ dr_mode = "host";
};
mdio@24520 {
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 26759a5..eb8a6aa 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -1,7 +1,7 @@
/*
* P2020 RDB Device Tree Source
*
- * Copyright 2009-2011 Freescale Semiconductor Inc.
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -197,6 +197,7 @@
usb@22000 {
phy_type = "ulpi";
+ dr_mode = "host";
};
mdio@24520 {
--
1.7.1
next reply other threads:[~2012-01-18 6:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-18 6:48 Ramneek Mehresh [this message]
2012-01-18 14:26 ` [PATCH] powerpc/85xx:Add dr_mode property in USB nodes Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1326869326-4271-1-git-send-email-ramneek.mehresh@freescale.com \
--to=ramneek.mehresh@freescale.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).