linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Poonam Aggrwal <poonam.aggrwal@freescale.com>
To: <devicetree-discuss@lists.ozlabs.org>, <linuxppc-dev@lists.ozlabs.org>
Cc: Sandeep Singh <Sandeep@freescale.com>,
	Poonam Aggrwal <poonam.aggrwal@freescale.com>
Subject: [PATCH][v2] Device Tree Bindings for Freescale TDM controller
Date: Tue, 20 Mar 2012 06:32:49 +0530	[thread overview]
Message-ID: <1332205369-26260-1-git-send-email-poonam.aggrwal@freescale.com> (raw)

This TDM controller is available in various Freescale SOCs like MPC8315, P1020,
P1022, P1010.

Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
---
Changes in v2:
	- Incorporated Scott's Review comments
 Documentation/devicetree/bindings/tdm/fsl-tdm.txt |   67 +++++++++++++++++++++
 1 files changed, 67 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/tdm/fsl-tdm.txt

diff --git a/Documentation/devicetree/bindings/tdm/fsl-tdm.txt b/Documentation/devicetree/bindings/tdm/fsl-tdm.txt
new file mode 100644
index 0000000..6553dbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/tdm/fsl-tdm.txt
@@ -0,0 +1,67 @@
+=====================================================================
+TDM Device Tree Binding
+Copyright (C) 2012 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary
+and subject to change.
+
+=====================================================================
+TDM (Time Division Multiplexing)
+
+DESCRIPTION
+
+The TDM is full duplex serial port designed to allow various devices including
+digital signal processors (DSPs) to communicate with a variety of serial devices
+including industry standard framers, codecs, other DSPs and microprocessors.
+
+The below properties describe the device tree bindings for Freescale TDM
+controller.
+This TDM controller is available on various Freescale Processors like
+MPC8315, P1020, P1022 and P1010.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Should contain "fsl,mpc8315-tdm".
+	  So mpc8315 will have compatible = "fsl,mpc8315-tdm";
+	  p1010 will have compatible "fsl,p1010-tdm", "fsl,mpc8315-tdm";
+
+  - reg
+      Usage: required
+      Definition: There are two reg resources. First is for  TDM registers and
+	  the second for TDM DMAC registers.
+
+  - clock-frequency
+      Usage: optional
+      Value type: <u32>
+      Definition: The frequency at which the TDM block is operating.
+
+  - interrupts
+      Usage: required
+      Definition: This field defines the interrupt specifiers for the two
+      interrupts. First is for TDM error and second for TDM DMAC.
+
+  - phy-handle
+      Usage: optional
+      Value type: <phandle>
+      Definition: Phandle of the line controller node or framer node eg. SLIC,
+	  E1/T1 etc.
+
+  - fsl,max-time-slots
+      Usage: required
+      Value type: <u32>
+      Definition: Maximum number of 8-bit time slots in one TDM frame.
+	  This is the maximum number which TDM hardware supports.
+
+EXAMPLE
+
+	tdm@16000 {
+		compatible = "fsl,p1010-tdm", "fsl,mpc8315-tdm";
+		reg = <0x16000 0x200 0x2c000 0x2000>;
+		clock-frequency = <399999999>; /* typically filled by u-boot */
+		interrupts = <16 8 62 8>;
+		phy-handle = <&zarlink1>;
+		fsl-max-time-slots = <128>;
+	};
-- 
1.6.5.6

             reply	other threads:[~2012-03-20  1:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-20  1:02 Poonam Aggrwal [this message]
2012-03-21 18:06 ` [PATCH][v2] Device Tree Bindings for Freescale TDM controller Kumar Gala
2012-03-22  5:26   ` Aggrwal Poonam-B10812

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1332205369-26260-1-git-send-email-poonam.aggrwal@freescale.com \
    --to=poonam.aggrwal@freescale.com \
    --cc=Sandeep@freescale.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).