* [PATCH 2/3] powerpc/eeh: remove eeh information from pci_dn
2012-03-21 7:30 [PATCH 1/3] powerpc/eeh: remove eeh device from OF node Gavin Shan
@ 2012-03-21 7:30 ` Gavin Shan
2012-03-21 7:30 ` [PATCH 3/3] powerpc/eeh: Retrieve PHB from global list Gavin Shan
1 sibling, 0 replies; 3+ messages in thread
From: Gavin Shan @ 2012-03-21 7:30 UTC (permalink / raw)
To: linuxppc-dev, benh; +Cc: sfr, shangw
The patch removes the eeh information from pci_dn since the eeh
device (struct eeh_dev) already contained those information.
Also, the pseries IOMMU mapping functions have been changed
for a little bit to retrieve PE address from eeh device instead
of pci_dn.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/pci-bridge.h | 8 --------
arch/powerpc/platforms/pseries/iommu.c | 29 +++++++++++++----------------
2 files changed, 13 insertions(+), 24 deletions(-)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 21f99ae..ac39e6a 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -156,14 +156,6 @@ struct pci_dn {
struct pci_dev *pcidev; /* back-pointer to the pci device */
#ifdef CONFIG_EEH
struct eeh_dev *edev; /* eeh device */
- int class_code; /* pci device class */
- int eeh_mode; /* See eeh.h for possible EEH_MODEs */
- int eeh_config_addr;
- int eeh_pe_config_addr; /* new-style partition endpoint address */
- int eeh_check_count; /* # times driver ignored error */
- int eeh_freeze_count; /* # times this device froze up. */
- int eeh_false_positives; /* # times this device reported #ff's */
- u32 config_space[16]; /* saved PCI config space */
#endif
#define IODA_INVALID_PE (-1)
#ifdef CONFIG_PPC_POWERNV
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index c442f2b..0915b1a 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -809,8 +809,7 @@ machine_arch_initcall(pseries, find_existing_ddw_windows);
static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_query_response *query)
{
- struct device_node *dn;
- struct pci_dn *pcidn;
+ struct eeh_dev *edev;
u32 cfg_addr;
u64 buid;
int ret;
@@ -821,12 +820,12 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
* Retrieve them from the pci device, not the node with the
* dma-window property
*/
- dn = pci_device_to_OF_node(dev);
- pcidn = PCI_DN(dn);
- cfg_addr = pcidn->eeh_config_addr;
- if (pcidn->eeh_pe_config_addr)
- cfg_addr = pcidn->eeh_pe_config_addr;
- buid = pcidn->phb->buid;
+ edev = pci_dev_to_eeh_dev(dev);
+ cfg_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ cfg_addr = edev->pe_config_addr;
+ buid = edev->phb->buid;
+
ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
cfg_addr, BUID_HI(buid), BUID_LO(buid));
dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
@@ -839,8 +838,7 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_create_response *create, int page_shift,
int window_shift)
{
- struct device_node *dn;
- struct pci_dn *pcidn;
+ struct eeh_dev *edev;
u32 cfg_addr;
u64 buid;
int ret;
@@ -851,12 +849,11 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
* Retrieve them from the pci device, not the node with the
* dma-window property
*/
- dn = pci_device_to_OF_node(dev);
- pcidn = PCI_DN(dn);
- cfg_addr = pcidn->eeh_config_addr;
- if (pcidn->eeh_pe_config_addr)
- cfg_addr = pcidn->eeh_pe_config_addr;
- buid = pcidn->phb->buid;
+ edev = pci_dev_to_eeh_dev(dev);
+ cfg_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ cfg_addr = edev->pe_config_addr;
+ buid = edev->phb->buid;
do {
/* extra outputs are LIOBN and dma-addr (hi, lo) */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH 3/3] powerpc/eeh: Retrieve PHB from global list
2012-03-21 7:30 [PATCH 1/3] powerpc/eeh: remove eeh device from OF node Gavin Shan
2012-03-21 7:30 ` [PATCH 2/3] powerpc/eeh: remove eeh information from pci_dn Gavin Shan
@ 2012-03-21 7:30 ` Gavin Shan
1 sibling, 0 replies; 3+ messages in thread
From: Gavin Shan @ 2012-03-21 7:30 UTC (permalink / raw)
To: linuxppc-dev, benh; +Cc: sfr, shangw
Currently, the existing PHBs are retrieved from the FDT (Flat
Device Tree) based on the name of FDT node. Specificly, those
FDT nodes whose names have prefix "pci" are regarded as PHBs.
That's inappropriate because some PCI bridges possibilly have
names leading with "pci". It caused EEH is enabled on same
PCI devices for towice.
The patch fixes the above issue. Besides, the PHBs are expected
to be figured out from FDT before enable EEH on them. Therefore,
it's resonable to retrieve the PHBs from the global linked list
traced by variable "hose_list" insteading poking them from FDT.
For the EEH implementation on pSeries platform, RTAS is critical
because all low-level functions are implemented based on RTAS.
Therefore, we should make sure "/rtas" OF node is available and
ready before to enable EEH core. However, it actually introduced
duplicate since the previous pSeries platform dependent initialization
function already do the check. Besides, we want to make eeh core
platform independent, so RTAS related staff should be removed there.
The patch removes the duplicate check on "/rtas" OF node for eeh
core.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/platforms/pseries/eeh.c | 19 +++++--------------
1 files changed, 5 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 8011088..309d38e 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -984,7 +984,8 @@ int __exit eeh_ops_unregister(const char *name)
*/
void __init eeh_init(void)
{
- struct device_node *phb, *np;
+ struct pci_controller *hose, *tmp;
+ struct device_node *phb;
int ret;
/* call platform initialization function */
@@ -1000,19 +1001,9 @@ void __init eeh_init(void)
raw_spin_lock_init(&confirm_error_lock);
- np = of_find_node_by_path("/rtas");
- if (np == NULL)
- return;
-
- /* Enable EEH for all adapters. Note that eeh requires buid's */
- for (phb = of_find_node_by_name(NULL, "pci"); phb;
- phb = of_find_node_by_name(phb, "pci")) {
- unsigned long buid;
-
- buid = get_phb_buid(phb);
- if (buid == 0 || !of_node_to_eeh_dev(phb))
- continue;
-
+ /* Enable EEH for all adapters */
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ phb = hose->dn;
traverse_pci_devices(phb, eeh_early_enable, NULL);
}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 3+ messages in thread