From: Jia Hongtao <B38951@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: b38951@freescale.com
Subject: [PATCH v2] powerpc/85xx: Add machine check handler to fix PCIe erratum on mpc85xx
Date: Mon, 26 Mar 2012 14:06:51 +0800 [thread overview]
Message-ID: <1332742011-2317-1-git-send-email-B38951@freescale.com> (raw)
From: Liu Shuo <shuo.liu@freescale.com>
A PCIe erratum of mpc85xx may causes a core hang when a link of PCIe
goes down. when the link goes down, Non-posted transactions issued
via the ATMU requiring completion result in an instruction stall.
At the same time a machine-check exception is generated to the core
to allow further processing by the handler. We implements the handler
which skips the instruction caused the stall.
Signed-off-by: Zhao Chenhui <b35336@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Liu Shuo <b35362@freescale.com>
Signed-off-by: Jia Hongtao <B38951@freescale.com>
---
Changes for v2:
* Update the copyright infomation.
* Add check to make sure the hose is for PCIe.
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
arch/powerpc/kernel/traps.c | 3 ++
arch/powerpc/sysdev/fsl_pci.c | 41 ++++++++++++++++++++++++++++-
arch/powerpc/sysdev/fsl_pci.h | 6 ++++
4 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 8053db0..213cb5e 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -64,7 +64,7 @@ _GLOBAL(__setup_cpu_e500v2)
bl __e500_icache_setup
bl __e500_dcache_setup
bl __setup_e500_ivors
-#ifdef CONFIG_FSL_RIO
+#if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI)
/* Ensure that RFXE is set */
mfspr r3,SPRN_HID1
oris r3,r3,HID1_RFXE@h
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index a750409..3a26b19 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -58,6 +58,7 @@
#include <asm/ppc-opcode.h>
#include <asm/rio.h>
#include <asm/fadump.h>
+#include <sysdev/fsl_pci.h>
#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
int (*__debugger)(struct pt_regs *regs) __read_mostly;
@@ -554,6 +555,8 @@ int machine_check_e500(struct pt_regs *regs)
if (reason & MCSR_BUS_RBERR) {
if (fsl_rio_mcheck_exception(regs))
return 1;
+ if (fsl_pci_mcheck_exception(regs))
+ return 1;
}
printk("Machine check in kernel mode.\n");
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 6073288..2878f11 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1,7 +1,7 @@
/*
* MPC83xx/85xx/86xx PCI/PCIE support routing.
*
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
* Copyright 2008-2009 MontaVista Software, Inc.
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
@@ -30,6 +30,7 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
#include <asm/machdep.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -807,3 +808,41 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose)
return 0;
}
+
+static int is_in_pci_mem_space(phys_addr_t addr)
+{
+ struct pci_controller *hose;
+ struct resource *res;
+ int i;
+
+ list_for_each_entry(hose, &hose_list, list_node) {
+ if (!early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP))
+ continue;
+
+ for (i = 0; i < 3; i++) {
+ res = &hose->mem_resources[i];
+ if ((res->flags & IORESOURCE_MEM) &&
+ addr >= res->start && addr <= res->end)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+int fsl_pci_mcheck_exception(struct pt_regs *regs)
+{
+ phys_addr_t addr = 0;
+
+#ifdef CONFIG_PHYS_64BIT
+ addr = mfspr(SPRN_MCARU);
+ addr <<= 32;
+#endif
+ addr += mfspr(SPRN_MCAR);
+
+ if (is_in_pci_mem_space(addr)) {
+ regs->nip += 4;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index a39ed5c..96b07ce 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -93,5 +93,11 @@ extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
extern int mpc83xx_add_bridge(struct device_node *dev);
u64 fsl_pci_immrbar_base(struct pci_controller *hose);
+#ifdef CONFIG_FSL_PCI
+extern int fsl_pci_mcheck_exception(struct pt_regs *);
+#else
+static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
+#endif
+
#endif /* __POWERPC_FSL_PCI_H */
#endif /* __KERNEL__ */
--
1.7.5.1
reply other threads:[~2012-03-26 6:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332742011-2317-1-git-send-email-B38951@freescale.com \
--to=b38951@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox