From: Claudiu Manoil <claudiu.manoil@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: Tang Yuantian <Yuantian.Tang@freescale.com>,
Claudiu Manoil <claudiu.manoil@freescale.com>
Subject: [PATCH][v1] powerpc/85xx: Fix sram_offset parameter type
Date: Thu, 26 Jul 2012 17:47:55 +0300 [thread overview]
Message-ID: <1343314075-2127-1-git-send-email-claudiu.manoil@freescale.com> (raw)
The sram_offset parameter represents a physical address
and should be of type phys_addr_t. As part of this fix,
the extraction of sram_params is being cleaned-up and
fixed.
This patch fixes now the case when the offset value of
0xfff00000 was being rejected by the driver (returning
-EINVAL), although this is a valid offset value.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
---
v1: fixed copyright year format
arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h | 4 +-
arch/powerpc/sysdev/fsl_85xx_l2ctlr.c | 39 ++++++++++------------------
2 files changed, 16 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h
index 60c9c0b..2aa97dd 100644
--- a/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h
+++ b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc
+ * Copyright 2009-2010, 2012 Freescale Semiconductor, Inc
*
* QorIQ based Cache Controller Memory Mapped Registers
*
@@ -91,7 +91,7 @@ struct mpc85xx_l2ctlr {
struct sram_parameters {
unsigned int sram_size;
- uint64_t sram_offset;
+ phys_addr_t sram_offset;
};
extern int instantiate_cache_sram(struct platform_device *dev,
diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
index 611bb4b..d131c8a 100644
--- a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
+++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010, 2012 Freescale Semiconductor, Inc.
*
* QorIQ (P1/P2) L2 controller init for Cache-SRAM instantiation
*
@@ -31,24 +31,21 @@ static char *sram_size;
static char *sram_offset;
struct mpc85xx_l2ctlr __iomem *l2ctlr;
-static long get_cache_sram_size(void)
+static int get_cache_sram_params(struct sram_parameters *sram_params)
{
- unsigned long val;
+ unsigned long long addr;
+ unsigned int size;
- if (!sram_size || (strict_strtoul(sram_size, 0, &val) < 0))
+ if (!sram_size || (kstrtouint(sram_size, 0, &size) < 0))
return -EINVAL;
- return val;
-}
-
-static long get_cache_sram_offset(void)
-{
- unsigned long val;
-
- if (!sram_offset || (strict_strtoul(sram_offset, 0, &val) < 0))
+ if (!sram_offset || (kstrtoull(sram_offset, 0, &addr) < 0))
return -EINVAL;
- return val;
+ sram_params->sram_offset = addr;
+ sram_params->sram_size = size;
+
+ return 0;
}
static int __init get_size_from_cmdline(char *str)
@@ -93,17 +90,9 @@ static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev)
}
l2cache_size = *prop;
- sram_params.sram_size = get_cache_sram_size();
- if ((int)sram_params.sram_size <= 0) {
- dev_err(&dev->dev,
- "Entire L2 as cache, Aborting Cache-SRAM stuff\n");
- return -EINVAL;
- }
-
- sram_params.sram_offset = get_cache_sram_offset();
- if ((int64_t)sram_params.sram_offset <= 0) {
+ if (get_cache_sram_params(&sram_params)) {
dev_err(&dev->dev,
- "Entire L2 as cache, provide a valid sram offset\n");
+ "Entire L2 as cache, provide valid sram offset and size\n");
return -EINVAL;
}
@@ -125,14 +114,14 @@ static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev)
* Write bits[0-17] to srbar0
*/
out_be32(&l2ctlr->srbar0,
- sram_params.sram_offset & L2SRAM_BAR_MSK_LO18);
+ lower_32_bits(sram_params.sram_offset) & L2SRAM_BAR_MSK_LO18);
/*
* Write bits[18-21] to srbare0
*/
#ifdef CONFIG_PHYS_64BIT
out_be32(&l2ctlr->srbarea0,
- (sram_params.sram_offset >> 32) & L2SRAM_BARE_MSK_HI4);
+ upper_32_bits(sram_params.sram_offset) & L2SRAM_BARE_MSK_HI4);
#endif
clrsetbits_be32(&l2ctlr->ctl, L2CR_L2E, L2CR_L2FI);
--
1.6.6
next reply other threads:[~2012-07-26 14:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-26 14:47 Claudiu Manoil [this message]
2012-07-26 18:53 ` [PATCH][v1] powerpc/85xx: Fix sram_offset parameter type Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343314075-2127-1-git-send-email-claudiu.manoil@freescale.com \
--to=claudiu.manoil@freescale.com \
--cc=Yuantian.Tang@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).