From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH -V5 11/13] arch/powerpc: properly isolate kernel and user proto-VSID
Date: Mon, 30 Jul 2012 16:52:17 +0530 [thread overview]
Message-ID: <1343647339-25576-12-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1343647339-25576-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
The proto-VSID space is divided into two class
User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
With KERNEL_START at 0xc000000000000000, the proto vsid for
the kernel ends up with 0xc00000000 (36 bits). With 64TB
patchset we need to have kernel proto-VSID in the
[2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/mmu-hash64.h | 16 +++++++++++++---
arch/powerpc/kernel/exceptions-64s.S | 4 +++-
arch/powerpc/mm/slb_low.S | 16 ++++++++++++++++
3 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index daa3e4b..8e97715 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -516,9 +516,19 @@ typedef struct {
/* This is only valid for addresses >= PAGE_OFFSET */
static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
{
- if (ssize == MMU_SEGSIZE_256M)
- return vsid_scramble(ea >> SID_SHIFT, 256M);
- return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
+ unsigned long proto_vsid;
+ /*
+ * We need to make sure proto_vsid for the kernel is
+ * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
+ */
+ if (ssize == MMU_SEGSIZE_256M) {
+ proto_vsid = ea >> SID_SHIFT;
+ proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
+ return vsid_scramble(proto_vsid, 256M);
+ }
+ proto_vsid = ea >> SID_SHIFT_1T;
+ proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
+ return vsid_scramble(proto_vsid, 1T);
}
/* Returns the segment size indicator for a user address */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 1c06d29..40ed208 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -958,7 +958,9 @@ _GLOBAL(do_stab_bolted)
rldimi r10,r11,7,52 /* r10 = first ste of the group */
/* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID */
+ /* This is a kernel address, so protovsid = ESID | 1 << 37 */
+ li r9,0x1
+ rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
ASM_VSID_SCRAMBLE(r11, r9, 256M)
rldic r9,r11,12,16 /* r9 = vsid << 12 */
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index db2cb3f..405d380 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -57,8 +57,16 @@ _GLOBAL(slb_allocate_realmode)
_GLOBAL(slb_miss_kernel_load_linear)
li r11,0
BEGIN_FTR_SECTION
+ li r9,0x1
+ rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
+ li r9,0x1
+ /*
+ * shift 12 bits less here, slb_finish_load_1T will do
+ * the necessary shits
+ */
+ rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
b slb_finish_load_1T
1:
@@ -86,8 +94,16 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
li r11,0
6:
BEGIN_FTR_SECTION
+ li r9,0x1
+ rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
+ li r9,0x1
+ /*
+ * shift 12 bits less here, slb_finish_load_1T will do
+ * the necessary shits
+ */
+ rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
b slb_finish_load_1T
0: /* user address: proto-VSID = context << 15 | ESID. First check
--
1.7.10
next prev parent reply other threads:[~2012-07-30 11:22 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 11:22 [PATCH -V5 0/13] arch/powerpc: Add 64TB support to ppc64 Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 01/13] arch/powerpc: Use hpt_va to compute virtual address Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 02/13] arch/powerpc: Simplify hpte_decode Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 03/13] arch/powerpc: Convert virtual address to vpn Aneesh Kumar K.V
2012-08-01 4:33 ` Paul Mackerras
2012-08-01 7:23 ` Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 04/13] arch/powerpc: Rename va " Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 05/13] arch/powerpc: Make KERN_VIRT_SIZE not dependend on PGTABLE_RANGE Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 06/13] arch/powerpc: Increase the slice range to 64TB Aneesh Kumar K.V
2012-08-01 5:16 ` Paul Mackerras
2012-08-01 7:43 ` Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 07/13] arch/powerpc: Make some of the PGTABLE_RANGE dependency explicit Aneesh Kumar K.V
2012-08-01 5:18 ` Paul Mackerras
2012-08-01 7:45 ` Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 08/13] arch/powerpc: Use the rquired number of VSID bits in slbmte Aneesh Kumar K.V
2012-08-01 5:19 ` Paul Mackerras
2012-07-30 11:22 ` [PATCH -V5 09/13] arch/powerpc: Use 32bit array for slb cache Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 10/13] arch/powerpc: Add 64TB support Aneesh Kumar K.V
2012-07-30 11:22 ` Aneesh Kumar K.V [this message]
2012-08-01 4:31 ` [PATCH -V5 11/13] arch/powerpc: properly isolate kernel and user proto-VSID Paul Mackerras
2012-08-01 7:58 ` Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 12/13] arch/powerpc: Replace open coded CONTEXT_BITS value Aneesh Kumar K.V
2012-08-01 5:29 ` Paul Mackerras
2012-08-01 9:56 ` Aneesh Kumar K.V
2012-07-30 11:22 ` [PATCH -V5 13/13] arch/powerpc: Update VSID allocation documentation Aneesh Kumar K.V
2012-08-01 5:35 ` Paul Mackerras
2012-08-01 10:01 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343647339-25576-12-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).