* [PATCH 1/2] powerpc/mpc5200: add dts files for ifm camera machines
@ 2012-08-24 15:39 Anatolij Gustschin
2012-08-24 15:39 ` [PATCH 2/2] dt/misc: add bindings documentation for ifm camera sensor interface Anatolij Gustschin
2012-08-30 7:31 ` [PATCH v2 1/2] powerpc/mpc5200: add dts files for ifm camera machines Anatolij Gustschin
0 siblings, 2 replies; 3+ messages in thread
From: Anatolij Gustschin @ 2012-08-24 15:39 UTC (permalink / raw)
To: linuxppc-dev; +Cc: devicetree-discuss, dzu
Add common o2d dtsi file to reuse it for other configurations.
Add machine compatible string to mpc5200 simple platform file.
Add dts files for O2D, O2I, O2MNT, O2DNT2, O2D300 and O3DNT boards.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
arch/powerpc/boot/dts/o2d.dts | 33 ++++++
arch/powerpc/boot/dts/o2d.dtsi | 139 ++++++++++++++++++++++++++
arch/powerpc/boot/dts/o2d300.dts | 52 ++++++++++
arch/powerpc/boot/dts/o2dnt2.dts | 48 +++++++++
arch/powerpc/boot/dts/o2i.dts | 33 ++++++
arch/powerpc/boot/dts/o2mnt.dts | 33 ++++++
arch/powerpc/boot/dts/o3dnt.dts | 48 +++++++++
arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
8 files changed, 387 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/o2d.dts
create mode 100644 arch/powerpc/boot/dts/o2d.dtsi
create mode 100644 arch/powerpc/boot/dts/o2d300.dts
create mode 100644 arch/powerpc/boot/dts/o2dnt2.dts
create mode 100644 arch/powerpc/boot/dts/o2i.dts
create mode 100644 arch/powerpc/boot/dts/o2mnt.dts
create mode 100644 arch/powerpc/boot/dts/o3dnt.dts
diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts
new file mode 100644
index 0000000..460064b
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dts
@@ -0,0 +1,33 @@
+/*
+ * O2D Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2d";
+ compatible = "ifm,o2d";
+
+ localbus {
+ flash@0,0 {
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+ /* o2d specific partitions */
+ partition@2c0000 {
+ label = "o2d user defined";
+ reg = <0x002c0000 0x00d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
new file mode 100644
index 0000000..3444eb8
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -0,0 +1,139 @@
+/*
+ * O2D base Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+ model = "ifm,o2d";
+ compatible = "ifm,o2d";
+
+ memory {
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+
+ gpio_simple: gpio@b00 {
+ };
+
+ timer@600 { // General Purpose Timer
+ #gpio-cells = <2>;
+ gpio-controller;
+ fsl,has-wdt;
+ fsl,wdt-on-boot = <0>;
+ };
+
+ timer@610 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ timer7: timer@670 {
+ };
+
+ rtc@800 {
+ status = "disabled";
+ };
+
+ psc@2000 { // PSC1
+ compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+
+ spidev@0 {
+ compatible = "spidev";
+ spi-max-frequency = <250000>;
+ reg = <0>;
+ };
+ };
+
+ psc@2200 { // PSC2
+ status = "disabled";
+ };
+
+ psc@2400 { // PSC3
+ status = "disabled";
+ };
+
+ psc@2600 { // PSC4
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ };
+
+ psc@2800 { // PSC5
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ };
+
+ psc@2c00 { // PSC6
+ status = "disabled";
+ };
+
+ ethernet@3000 {
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ sclpc@3c00 {
+ compatible = "fsl,mpc5200-lpbfifo";
+ reg = <0x3c00 0x60>;
+ interrupts = <3 23 0>;
+ };
+ };
+
+ localbus {
+ ranges = <0 0 0xff000000 0x01000000
+ 3 0 0xe3000000 0x00100000>;
+
+ // flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <1>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ no-unaligned-direct-access;
+
+ /* common layout for all machines */
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "env";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ };
+
+ csi@3,0 {
+ compatible = "ifm,o2d-csi";
+ reg = <3 0 0x00100000>;
+ ifm,csi-clk-handle = <&timer7>;
+ gpios = <&gpio_simple 23 0 /* imag_capture */
+ &gpio_simple 26 0 /* imag_reset */
+ &gpio_simple 29 0>; /* imag_master_en */
+
+ interrupts = <1 1 2>; /* IRQ1, edge falling */
+
+ ifm,csi-addr-bus-width = <24>;
+ ifm,csi-data-bus-width = <8>;
+ ifm,csi-wait-cycles = <0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2d300.dts b/arch/powerpc/boot/dts/o2d300.dts
new file mode 100644
index 0000000..29affe0
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d300.dts
@@ -0,0 +1,52 @@
+/*
+ * O2D300 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2d300";
+ compatible = "ifm,o2d";
+
+ localbus {
+ ranges = <0 0 0xfc000000 0x02000000
+ 3 0 0xe3000000 0x00100000>;
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@40000 {
+ label = "env_1";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "env_2";
+ reg = <0x00060000 0x00020000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "kernel";
+ reg = <0x00080000 0x00260000>;
+ read-only;
+ };
+ /* o2d300 specific partitions */
+ partition@2e0000 {
+ label = "o2d300 user defined";
+ reg = <0x002e0000 0x01d20000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts
new file mode 100644
index 0000000..a0f5b97
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2dnt2.dts
@@ -0,0 +1,48 @@
+/*
+ * O2DNT2 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2dnt2";
+ compatible = "ifm,o2d";
+
+ memory {
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ localbus {
+ ranges = <0 0 0xfc000000 0x02000000
+ 3 0 0xe3000000 0x00100000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+
+ /* o2dnt2 specific partitions */
+ partition@2c0000 {
+ label = "o2dnt2 user defined";
+ reg = <0x002c0000 0x01d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2i.dts b/arch/powerpc/boot/dts/o2i.dts
new file mode 100644
index 0000000..e3cc99d
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2i.dts
@@ -0,0 +1,33 @@
+/*
+ * O2I Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2i";
+ compatible = "ifm,o2d";
+
+ localbus {
+ flash@0,0 {
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+ /* o2i specific partitions */
+ partition@2c0000 {
+ label = "o2i user defined";
+ reg = <0x002c0000 0x00d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2mnt.dts b/arch/powerpc/boot/dts/o2mnt.dts
new file mode 100644
index 0000000..2fa4349
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2mnt.dts
@@ -0,0 +1,33 @@
+/*
+ * O2MNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2mnt";
+ compatible = "ifm,o2d";
+
+ localbus {
+ flash@0,0 {
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+ /* add o2mnt specific partitions */
+ partition@2c0000 {
+ label = "o2mnt user defined";
+ reg = <0x002c0000 0x00d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts
new file mode 100644
index 0000000..acce493
--- /dev/null
+++ b/arch/powerpc/boot/dts/o3dnt.dts
@@ -0,0 +1,48 @@
+/*
+ * O3DNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o3dnt";
+ compatible = "ifm,o2d";
+
+ memory {
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ localbus {
+ ranges = <0 0 0xfc000000 0x01000000
+ 3 0 0xe3000000 0x00100000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+
+ /* o3dnt specific partitions */
+ partition@2c0000 {
+ label = "o3dnt user defined";
+ reg = <0x002c0000 0x00d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index c0aa040..9cf3602 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -52,6 +52,7 @@ static void __init mpc5200_simple_setup_arch(void)
static const char *board[] __initdata = {
"anonymous,a4m072",
"anon,charon",
+ "ifm,o2d",
"intercontrol,digsy-mtc",
"manroland,mucmc52",
"manroland,uc101",
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH 2/2] dt/misc: add bindings documentation for ifm camera sensor interface
2012-08-24 15:39 [PATCH 1/2] powerpc/mpc5200: add dts files for ifm camera machines Anatolij Gustschin
@ 2012-08-24 15:39 ` Anatolij Gustschin
2012-08-30 7:31 ` [PATCH v2 1/2] powerpc/mpc5200: add dts files for ifm camera machines Anatolij Gustschin
1 sibling, 0 replies; 3+ messages in thread
From: Anatolij Gustschin @ 2012-08-24 15:39 UTC (permalink / raw)
To: linuxppc-dev; +Cc: devicetree-discuss, dzu
IFM O2D cameras use special sensor bus interface glue-logic to
connect camera sensors to mpc5200 LocalPlus bus. Add device tree
bindings documentation for it.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
Documentation/devicetree/bindings/misc/ifm-csi.txt | 41 ++++++++++++++++++++
1 files changed, 41 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/misc/ifm-csi.txt
diff --git a/Documentation/devicetree/bindings/misc/ifm-csi.txt b/Documentation/devicetree/bindings/misc/ifm-csi.txt
new file mode 100644
index 0000000..5bdfffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ifm-csi.txt
@@ -0,0 +1,41 @@
+IFM camera sensor interface on mpc5200 LocalPlus bus
+
+Required properties:
+- compatible: "ifm,o2d-csi"
+- reg: specifies sensor chip select number and associated address range
+- interrupts: external interrupt line number and interrupt sense mode
+ of the interrupt line signaling frame valid events
+- gpios: three gpio-specifiers for "capture", "reset" and "master enable"
+ GPIOs (strictly in this order).
+- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor
+ clock generator. This node is usually a general purpose timer controller.
+- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25)
+- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16)
+- ifm,csi-wait-cycles: sensor bus wait cycles
+
+Optional properties:
+- ifm,csi-byte-swap: if this property is present, the byte swapping on
+ the bus will be enabled.
+
+Example:
+
+ csi@3,0 {
+ compatible = "ifm,o2d-csi";
+ reg = <3 0 0x00100000>; /* CS 3, 1 MiB range */
+ interrupts = <1 1 2>; /* IRQ1, edge falling */
+
+ ifm,csi-clk-handle = <&timer7>;
+ gpios = <&gpio_simple 23 0 /* image_capture */
+ &gpio_simple 26 0 /* image_reset */
+ &gpio_simple 29 0>; /* image_master_en */
+
+ ifm,csi-addr-bus-width = <24>;
+ ifm,csi-data-bus-width = <8>;
+ ifm,csi-wait-cycles = <0>;
+ };
+
+The base address of the used chip select is specified in the
+ranges property of the parent localbus node, for example:
+
+ ranges = <0 0 0xff000000 0x01000000
+ 3 0 0xe3000000 0x00100000>;
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 1/2] powerpc/mpc5200: add dts files for ifm camera machines
2012-08-24 15:39 [PATCH 1/2] powerpc/mpc5200: add dts files for ifm camera machines Anatolij Gustschin
2012-08-24 15:39 ` [PATCH 2/2] dt/misc: add bindings documentation for ifm camera sensor interface Anatolij Gustschin
@ 2012-08-30 7:31 ` Anatolij Gustschin
1 sibling, 0 replies; 3+ messages in thread
From: Anatolij Gustschin @ 2012-08-30 7:31 UTC (permalink / raw)
To: linuxppc-dev; +Cc: devicetree-discuss, dzu
Add common o2d dtsi file to reuse it for other configurations.
Add machine compatible string to mpc5200 simple platform file.
Add dts files for O2D, O2I, O2MNT, O2DNT2, O2D300 and O3DNT boards.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
v2:
- changed flash node description in o2d.dts and tested it
on this board
- fixed white spaces in o2d.dts and o2mnt.dts files
arch/powerpc/boot/dts/o2d.dts | 47 +++++++++
arch/powerpc/boot/dts/o2d.dtsi | 139 ++++++++++++++++++++++++++
arch/powerpc/boot/dts/o2d300.dts | 52 ++++++++++
arch/powerpc/boot/dts/o2dnt2.dts | 48 +++++++++
arch/powerpc/boot/dts/o2i.dts | 33 ++++++
arch/powerpc/boot/dts/o2mnt.dts | 33 ++++++
arch/powerpc/boot/dts/o3dnt.dts | 48 +++++++++
arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
8 files changed, 401 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/o2d.dts
create mode 100644 arch/powerpc/boot/dts/o2d.dtsi
create mode 100644 arch/powerpc/boot/dts/o2d300.dts
create mode 100644 arch/powerpc/boot/dts/o2dnt2.dts
create mode 100644 arch/powerpc/boot/dts/o2i.dts
create mode 100644 arch/powerpc/boot/dts/o2mnt.dts
create mode 100644 arch/powerpc/boot/dts/o3dnt.dts
diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts
new file mode 100644
index 0000000..9f6dd4d
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dts
@@ -0,0 +1,47 @@
+/*
+ * O2D Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2d";
+ compatible = "ifm,o2d";
+
+ memory {
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ localbus {
+ ranges = <0 0 0xfc000000 0x02000000
+ 3 0 0xe3000000 0x00100000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+ /* o2d specific partitions */
+ partition@2c0000 {
+ label = "o2d user defined";
+ reg = <0x002c0000 0x01d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
new file mode 100644
index 0000000..3444eb8
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -0,0 +1,139 @@
+/*
+ * O2D base Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+ model = "ifm,o2d";
+ compatible = "ifm,o2d";
+
+ memory {
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+
+ gpio_simple: gpio@b00 {
+ };
+
+ timer@600 { // General Purpose Timer
+ #gpio-cells = <2>;
+ gpio-controller;
+ fsl,has-wdt;
+ fsl,wdt-on-boot = <0>;
+ };
+
+ timer@610 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ timer7: timer@670 {
+ };
+
+ rtc@800 {
+ status = "disabled";
+ };
+
+ psc@2000 { // PSC1
+ compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+
+ spidev@0 {
+ compatible = "spidev";
+ spi-max-frequency = <250000>;
+ reg = <0>;
+ };
+ };
+
+ psc@2200 { // PSC2
+ status = "disabled";
+ };
+
+ psc@2400 { // PSC3
+ status = "disabled";
+ };
+
+ psc@2600 { // PSC4
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ };
+
+ psc@2800 { // PSC5
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ };
+
+ psc@2c00 { // PSC6
+ status = "disabled";
+ };
+
+ ethernet@3000 {
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ sclpc@3c00 {
+ compatible = "fsl,mpc5200-lpbfifo";
+ reg = <0x3c00 0x60>;
+ interrupts = <3 23 0>;
+ };
+ };
+
+ localbus {
+ ranges = <0 0 0xff000000 0x01000000
+ 3 0 0xe3000000 0x00100000>;
+
+ // flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <1>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ no-unaligned-direct-access;
+
+ /* common layout for all machines */
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "env";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ };
+
+ csi@3,0 {
+ compatible = "ifm,o2d-csi";
+ reg = <3 0 0x00100000>;
+ ifm,csi-clk-handle = <&timer7>;
+ gpios = <&gpio_simple 23 0 /* imag_capture */
+ &gpio_simple 26 0 /* imag_reset */
+ &gpio_simple 29 0>; /* imag_master_en */
+
+ interrupts = <1 1 2>; /* IRQ1, edge falling */
+
+ ifm,csi-addr-bus-width = <24>;
+ ifm,csi-data-bus-width = <8>;
+ ifm,csi-wait-cycles = <0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2d300.dts b/arch/powerpc/boot/dts/o2d300.dts
new file mode 100644
index 0000000..29affe0
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d300.dts
@@ -0,0 +1,52 @@
+/*
+ * O2D300 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2d300";
+ compatible = "ifm,o2d";
+
+ localbus {
+ ranges = <0 0 0xfc000000 0x02000000
+ 3 0 0xe3000000 0x00100000>;
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@40000 {
+ label = "env_1";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "env_2";
+ reg = <0x00060000 0x00020000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "kernel";
+ reg = <0x00080000 0x00260000>;
+ read-only;
+ };
+ /* o2d300 specific partitions */
+ partition@2e0000 {
+ label = "o2d300 user defined";
+ reg = <0x002e0000 0x01d20000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts
new file mode 100644
index 0000000..a0f5b97
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2dnt2.dts
@@ -0,0 +1,48 @@
+/*
+ * O2DNT2 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2dnt2";
+ compatible = "ifm,o2d";
+
+ memory {
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ localbus {
+ ranges = <0 0 0xfc000000 0x02000000
+ 3 0 0xe3000000 0x00100000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+
+ /* o2dnt2 specific partitions */
+ partition@2c0000 {
+ label = "o2dnt2 user defined";
+ reg = <0x002c0000 0x01d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2i.dts b/arch/powerpc/boot/dts/o2i.dts
new file mode 100644
index 0000000..e3cc99d
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2i.dts
@@ -0,0 +1,33 @@
+/*
+ * O2I Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2i";
+ compatible = "ifm,o2d";
+
+ localbus {
+ flash@0,0 {
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+ /* o2i specific partitions */
+ partition@2c0000 {
+ label = "o2i user defined";
+ reg = <0x002c0000 0x00d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o2mnt.dts b/arch/powerpc/boot/dts/o2mnt.dts
new file mode 100644
index 0000000..d91859a
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2mnt.dts
@@ -0,0 +1,33 @@
+/*
+ * O2MNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o2mnt";
+ compatible = "ifm,o2d";
+
+ localbus {
+ flash@0,0 {
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+ /* add o2mnt specific partitions */
+ partition@2c0000 {
+ label = "o2mnt user defined";
+ reg = <0x002c0000 0x00d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts
new file mode 100644
index 0000000..acce493
--- /dev/null
+++ b/arch/powerpc/boot/dts/o3dnt.dts
@@ -0,0 +1,48 @@
+/*
+ * O3DNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+ model = "ifm,o3dnt";
+ compatible = "ifm,o2d";
+
+ memory {
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ localbus {
+ ranges = <0 0 0xfc000000 0x01000000
+ 3 0 0xe3000000 0x00100000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@60000 {
+ label = "kernel";
+ reg = <0x00060000 0x00260000>;
+ read-only;
+ };
+
+ /* o3dnt specific partitions */
+ partition@2c0000 {
+ label = "o3dnt user defined";
+ reg = <0x002c0000 0x00d40000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index c0aa040..9cf3602 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -52,6 +52,7 @@ static void __init mpc5200_simple_setup_arch(void)
static const char *board[] __initdata = {
"anonymous,a4m072",
"anon,charon",
+ "ifm,o2d",
"intercontrol,digsy-mtc",
"manroland,mucmc52",
"manroland,uc101",
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-08-30 7:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-24 15:39 [PATCH 1/2] powerpc/mpc5200: add dts files for ifm camera machines Anatolij Gustschin
2012-08-24 15:39 ` [PATCH 2/2] dt/misc: add bindings documentation for ifm camera sensor interface Anatolij Gustschin
2012-08-30 7:31 ` [PATCH v2 1/2] powerpc/mpc5200: add dts files for ifm camera machines Anatolij Gustschin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).