From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Tiejun Chen <tiejun.chen@windriver.com>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [v5][PATCH 2/3] powerpc/kprobe: complete kprobe and migrate exception frame
Date: Tue, 18 Sep 2012 15:05:55 +1000 [thread overview]
Message-ID: <1347944755.2386.43.camel@pasglop> (raw)
In-Reply-To: <1347875671-15838-2-git-send-email-tiejun.chen@windriver.com>
On Mon, 2012-09-17 at 17:54 +0800, Tiejun Chen wrote:
> -#ifdef CONFIG_PREEMPT
> b restore
>
> /* N.B. the only way to get here is from the beq following ret_from_except. */
> resume_kernel:
> - /* check current_thread_info->preempt_count */
> + /* check current_thread_info, _TIF_EMULATE_STACK_STORE */
> CURRENT_THREAD_INFO(r9, r1)
> + lwz r8,TI_FLAGS(r9)
> + andis. r8,r8,_TIF_EMULATE_STACK_STORE@h
> + beq+ 1f
> +
> + addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
> +
> + lwz r3,GPR1(r1)
> + subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
> + mr r4,r1 /* src: current exception frame */
> + li r5,INT_FRAME_SIZE /* size: INT_FRAME_SIZE */
> + li r6,0 /* start offset: 0 */
> + mr r1,r3 /* Reroute the trampoline frame to r1 */
> +
> + /* Copy from the original to the trampoline. */
> + li r6,0
You just did that li r6,0 2 lines above :-) I'll fix it up manually
while applying.
> + srwi r5,r5,2
> + mtctr r5
> +2: lwzx r0,r6,r4
> + stwx r0,r6,r3
> + addi r6,r6,4
> + bdnz 2b
> +
> + /* Do real store operation to complete stwu */
> + lwz r5,GPR1(r1)
> + stw r8,0(r5)
> +
> + /* Clear _TIF_EMULATE_STACK_STORE flag */
> + lis r11,_TIF_EMULATE_STACK_STORE@h
> + addi r5,r9,TI_FLAGS
> +0: lwarx r8,0,r5
> + andc r8,r8,r11
> +#ifdef CONFIG_IBM405_ERR77
> + dcbt 0,r5
> +#endif
> + stwcx. r8,0,r5
> + bne- 0b
> +1:
> +
> +#ifdef CONFIG_PREEMPT
> + /* check current_thread_info->preempt_count */
> lwz r0,TI_PREEMPT(r9)
> cmpwi 0,r0,0 /* if non-zero, just restore regs and return */
> bne restore
> - lwz r0,TI_FLAGS(r9)
> - andi. r0,r0,_TIF_NEED_RESCHED
> + andi. r8,r8,_TIF_NEED_RESCHED
> beq+ restore
> + lwz r3,_MSR(r1)
> andi. r0,r3,MSR_EE /* interrupts off? */
> beq restore /* don't schedule if so */
> #ifdef CONFIG_TRACE_IRQFLAGS
> @@ -864,8 +903,6 @@ resume_kernel:
> */
> bl trace_hardirqs_on
> #endif
> -#else
> -resume_kernel:
> #endif /* CONFIG_PREEMPT */
>
> /* interrupts are hard-disabled at this point */
> diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
> index b40e0b4..bdd2dc1 100644
> --- a/arch/powerpc/kernel/entry_64.S
> +++ b/arch/powerpc/kernel/entry_64.S
> @@ -593,6 +593,43 @@ _GLOBAL(ret_from_except_lite)
> b .ret_from_except
>
> resume_kernel:
> + /* check current_thread_info, _TIF_EMULATE_STACK_STORE */
> + CURRENT_THREAD_INFO(r9, r1)
> + ld r8,TI_FLAGS(r9)
> + andis. r8,r8,_TIF_EMULATE_STACK_STORE@h
> + beq+ 1f
> +
> + addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
> +
> + lwz r3,GPR1(r1)
> + subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
> + mr r4,r1 /* src: current exception frame */
> + li r5,INT_FRAME_SIZE /* size: INT_FRAME_SIZE */
> + li r6,0 /* start offset: 0 */
> + mr r1,r3 /* Reroute the trampoline frame to r1 */
> +
> + /* Copy from the original to the trampoline. */
> + li r6,0
> + srwi r5,r5,3
> + mtctr r5
> +2: ldx r0,r6,r4
> + stdx r0,r6,r3
> + addi r6,r6,8
> + bdnz 2b
> +
> + /* Do real store operation to complete stwu */
> + lwz r5,GPR1(r1)
> + std r8,0(r5)
> +
> + /* Clear _TIF_EMULATE_STACK_STORE flag */
> + lis r11,_TIF_EMULATE_STACK_STORE@h
> + addi r5,r9,TI_FLAGS
> + ldarx r4,0,r5
> + andc r4,r4,r11
> + stdcx. r4,0,r5
> + bne- 0b
> +1:
> +
> #ifdef CONFIG_PREEMPT
> /* Check if we need to preempt */
> andi. r0,r4,_TIF_NEED_RESCHED
next prev parent reply other threads:[~2012-09-18 5:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-17 9:54 [v5][PATCH 1/3] powerpc/kprobe: introduce a new thread flag Tiejun Chen
2012-09-17 9:54 ` [v5][PATCH 2/3] powerpc/kprobe: complete kprobe and migrate exception frame Tiejun Chen
2012-09-17 10:02 ` David Laight
2012-09-17 10:19 ` tiejun.chen
2012-09-18 5:05 ` Benjamin Herrenschmidt [this message]
2012-09-18 5:09 ` Benjamin Herrenschmidt
2012-09-18 6:13 ` tiejun.chen
2012-09-17 9:54 ` [v5][PATCH 3/3] powerpc/kprobe: don't emulate store when kprobe stwu r1 Tiejun Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347944755.2386.43.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=tiejun.chen@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).