* [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events
@ 2013-01-10 0:06 sukadev
2013-01-10 0:06 ` [PATCH 2/6][v3] perf: Make EVENT_ATTR global sukadev
` (4 more replies)
0 siblings, 5 replies; 8+ messages in thread
From: sukadev @ 2013-01-10 0:06 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras
Cc: robert.richter, linuxppc-dev, Anton Blanchard, Jiri Olsa,
Arnaldo Carvalho de Melo
Define and use macros to identify perf events codes. This would make it
easier and more readable when these event codes need to be used in more
than one place.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
arch/powerpc/perf/power7-pmu.c | 28 ++++++++++++++++++++--------
1 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 441af08..44e70d2 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -51,6 +51,18 @@
#define MMCR1_PMCSEL_MSK 0xff
/*
+ * Power7 event codes.
+ */
+#define PME_PM_CYC 0x1e
+#define PME_PM_GCT_NOSLOT_CYC 0x100f8
+#define PME_PM_CMPLU_STALL 0x4000a
+#define PME_PM_INST_CMPL 0x2
+#define PME_PM_LD_REF_L1 0xc880
+#define PME_PM_LD_MISS_L1 0x400f0
+#define PME_PM_BRU_FIN 0x10068
+#define PME_PM_BRU_MPRED 0x400f6
+
+/*
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
* 3210987654321098765432109876543210987654321098765432109876543210
@@ -296,14 +308,14 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
}
static int power7_generic_events[] = {
- [PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
- [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
- [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a, /* CMPLU_STALL */
- [PERF_COUNT_HW_INSTRUCTIONS] = 2,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880, /* LD_REF_L1_LSU*/
- [PERF_COUNT_HW_CACHE_MISSES] = 0x400f0, /* LD_MISS_L1 */
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x10068, /* BRU_FIN */
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x400f6, /* BR_MPRED */
+ [PERF_COUNT_HW_CPU_CYCLES] = PME_PM_CYC,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PME_PM_GCT_NOSLOT_CYC,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = PME_PM_CMPLU_STALL,
+ [PERF_COUNT_HW_INSTRUCTIONS] = PME_PM_INST_CMPL,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = PME_PM_LD_REF_L1,
+ [PERF_COUNT_HW_CACHE_MISSES] = PME_PM_LD_MISS_L1,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PME_PM_BRU_FIN,
+ [PERF_COUNT_HW_BRANCH_MISSES] = PME_PM_BRU_MPRED,
};
#define C(x) PERF_COUNT_HW_CACHE_##x
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/6][v3] perf: Make EVENT_ATTR global
2013-01-10 0:06 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
@ 2013-01-10 0:06 ` sukadev
2013-01-10 0:06 ` [PATCH 3/6][v3] perf/POWER7: Make generic event translations available in sysfs sukadev
` (3 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: sukadev @ 2013-01-10 0:06 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras
Cc: robert.richter, linuxppc-dev, Anton Blanchard, Jiri Olsa,
Arnaldo Carvalho de Melo
Rename EVENT_ATTR() to PMU_EVENT_ATTR() and make it global so it is
available to all architectures.
Further to allow architectures flexibility, have PMU_EVENT_ATTR() pass
in the variable name as a parameter.
Changelog[v3]
- [Jiri Olsa] No need to define PMU_EVENT_PTR()
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
arch/x86/kernel/cpu/perf_event.c | 13 +++----------
include/linux/perf_event.h | 11 +++++++++++
2 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 4428fd1..59a1238 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1316,11 +1316,6 @@ static struct attribute_group x86_pmu_format_group = {
.attrs = NULL,
};
-struct perf_pmu_events_attr {
- struct device_attribute attr;
- u64 id;
-};
-
/*
* Remove all undefined events (x86_pmu.event_map(id) == 0)
* out of events_attr attributes.
@@ -1354,11 +1349,9 @@ static ssize_t events_sysfs_show(struct device *dev, struct device_attribute *at
#define EVENT_VAR(_id) event_attr_##_id
#define EVENT_PTR(_id) &event_attr_##_id.attr.attr
-#define EVENT_ATTR(_name, _id) \
-static struct perf_pmu_events_attr EVENT_VAR(_id) = { \
- .attr = __ATTR(_name, 0444, events_sysfs_show, NULL), \
- .id = PERF_COUNT_HW_##_id, \
-};
+#define EVENT_ATTR(_name, _id) \
+ PMU_EVENT_ATTR(_name, EVENT_VAR(_id), PERF_COUNT_HW_##_id, \
+ events_sysfs_show)
EVENT_ATTR(cpu-cycles, CPU_CYCLES );
EVENT_ATTR(instructions, INSTRUCTIONS );
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 6bfb2fa..42adf01 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -817,6 +817,17 @@ do { \
} while (0)
+struct perf_pmu_events_attr {
+ struct device_attribute attr;
+ u64 id;
+};
+
+#define PMU_EVENT_ATTR(_name, _var, _id, _show) \
+static struct perf_pmu_events_attr _var = { \
+ .attr = __ATTR(_name, 0444, _show, NULL), \
+ .id = _id, \
+};
+
#define PMU_FORMAT_ATTR(_name, _format) \
static ssize_t \
_name##_show(struct device *dev, \
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/6][v3] perf/POWER7: Make generic event translations available in sysfs
2013-01-10 0:06 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
2013-01-10 0:06 ` [PATCH 2/6][v3] perf: Make EVENT_ATTR global sukadev
@ 2013-01-10 0:06 ` sukadev
2013-01-10 0:06 ` [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events " sukadev
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: sukadev @ 2013-01-10 0:06 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras
Cc: robert.richter, linuxppc-dev, Anton Blanchard, Jiri Olsa,
Arnaldo Carvalho de Melo
Make the generic perf events in POWER7 available via sysfs.
$ ls /sys/bus/event_source/devices/cpu/events
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
stalled-cycles-backend
stalled-cycles-frontend
$ cat /sys/bus/event_source/devices/cpu/events/cache-misses
event=0x400f0
This patch is based on commits that implement this functionality on x86.
Eg:
commit a47473939db20e3961b200eb00acf5fcf084d755
Author: Jiri Olsa <jolsa@redhat.com>
Date: Wed Oct 10 14:53:11 2012 +0200
perf/x86: Make hardware event translations available in sysfs
Changelog:[v3]
[Jiri Olsa] Drop EVENT_ID() macro since it is only used once.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 24 ++++++++++++++
arch/powerpc/perf/core-book3s.c | 12 +++++++
arch/powerpc/perf/power7-pmu.c | 34 +++++++++++++++++++++
3 files changed, 70 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/stable/sysfs-devices-cpu-events
diff --git a/Documentation/ABI/stable/sysfs-devices-cpu-events b/Documentation/ABI/stable/sysfs-devices-cpu-events
new file mode 100644
index 0000000..e69de29
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 9710be3..3f21d89 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -11,6 +11,7 @@
#include <linux/types.h>
#include <asm/hw_irq.h>
+#include <linux/device.h>
#define MAX_HWEVENTS 8
#define MAX_EVENT_ALTERNATIVES 8
@@ -35,6 +36,7 @@ struct power_pmu {
void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
int (*limited_pmc_event)(u64 event_id);
u32 flags;
+ const struct attribute_group **attr_groups;
int n_generic;
int *generic_events;
int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
@@ -109,3 +111,25 @@ extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
* If an event_id is not subject to the constraint expressed by a particular
* field, then it will have 0 in both the mask and value for that field.
*/
+
+extern ssize_t power_events_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *page);
+
+/*
+ * EVENT_VAR() is same as PMU_EVENT_VAR with a suffix.
+ *
+ * Having a suffix allows us to have aliases in sysfs - eg: the generic
+ * event 'cpu-cycles' can have two entries in sysfs: 'cpu-cycles' and
+ * 'PM_CYC' where the latter is the name by which the event is known in
+ * POWER CPU specification.
+ */
+#define EVENT_VAR(_id, _suffix) event_attr_##_id##_suffix
+#define EVENT_PTR(_id, _suffix) &EVENT_VAR(_id, _suffix)
+
+#define EVENT_ATTR(_name, _id, _suffix) \
+ PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_PM_##_id, \
+ power_events_sysfs_show)
+
+#define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g)
+#define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g)
+
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index aa2465e..fa476d5 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1305,6 +1305,16 @@ static int power_pmu_event_idx(struct perf_event *event)
return event->hw.idx;
}
+ssize_t power_events_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ struct perf_pmu_events_attr *pmu_attr;
+
+ pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+
+ return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
+}
+
struct pmu power_pmu = {
.pmu_enable = power_pmu_enable,
.pmu_disable = power_pmu_disable,
@@ -1537,6 +1547,8 @@ int __cpuinit register_power_pmu(struct power_pmu *pmu)
pr_info("%s performance monitor hardware support registered\n",
pmu->name);
+ power_pmu.attr_groups = ppmu->attr_groups;
+
#ifdef MSR_HV
/*
* Use FCHV to ignore kernel events if MSR.HV is set.
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 44e70d2..ae5d757 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -363,6 +363,39 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
},
};
+
+GENERIC_EVENT_ATTR(cpu-cycles, CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-frontend, GCT_NOSLOT_CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-backend, CMPLU_STALL);
+GENERIC_EVENT_ATTR(instructions, INST_CMPL);
+GENERIC_EVENT_ATTR(cache-references, LD_REF_L1);
+GENERIC_EVENT_ATTR(cache-misses, LD_MISS_L1);
+GENERIC_EVENT_ATTR(branch-instructions, BRU_FIN);
+GENERIC_EVENT_ATTR(branch-misses, BRU_MPRED);
+
+static struct attribute *power7_events_attr[] = {
+ GENERIC_EVENT_PTR(CYC),
+ GENERIC_EVENT_PTR(GCT_NOSLOT_CYC),
+ GENERIC_EVENT_PTR(CMPLU_STALL),
+ GENERIC_EVENT_PTR(INST_CMPL),
+ GENERIC_EVENT_PTR(LD_REF_L1),
+ GENERIC_EVENT_PTR(LD_MISS_L1),
+ GENERIC_EVENT_PTR(BRU_FIN),
+ GENERIC_EVENT_PTR(BRU_MPRED),
+ NULL
+};
+
+
+static struct attribute_group power7_pmu_events_group = {
+ .name = "events",
+ .attrs = power7_events_attr,
+};
+
+static const struct attribute_group *power7_pmu_attr_groups[] = {
+ &power7_pmu_events_group,
+ NULL,
+};
+
static struct power_pmu power7_pmu = {
.name = "POWER7",
.n_counter = 6,
@@ -374,6 +407,7 @@ static struct power_pmu power7_pmu = {
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
.flags = PPMU_ALT_SIPR,
+ .attr_groups = power7_pmu_attr_groups,
.n_generic = ARRAY_SIZE(power7_generic_events),
.generic_events = power7_generic_events,
.cache_events = &power7_cache_events,
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events available in sysfs
2013-01-10 0:06 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
2013-01-10 0:06 ` [PATCH 2/6][v3] perf: Make EVENT_ATTR global sukadev
2013-01-10 0:06 ` [PATCH 3/6][v3] perf/POWER7: Make generic event translations available in sysfs sukadev
@ 2013-01-10 0:06 ` sukadev
2013-01-10 0:06 ` [PATCH 5/6][v3] perf: Create a sysfs entry for Power event format sukadev
2013-01-10 0:06 ` [PATCH 6/6][v3] perf: Document the ABI of perf sysfs entries sukadev
4 siblings, 0 replies; 8+ messages in thread
From: sukadev @ 2013-01-10 0:06 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras
Cc: robert.richter, linuxppc-dev, Anton Blanchard, Jiri Olsa,
Arnaldo Carvalho de Melo
Make some POWER7-specific perf events available in sysfs.
$ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
PM_BRU_FIN
PM_BRU_MPRED
PM_CMPLU_STALL
PM_CYC
PM_GCT_NOSLOT_CYC
PM_INST_CMPL
PM_LD_MISS_L1
PM_LD_REF_L1
stalled-cycles-backend
stalled-cycles-frontend
where the 'PM_*' events are POWER specific and the others are the
generic events.
This will enable users to specify these events with their symbolic
names rather than with their raw code.
perf stat -e 'cpu/PM_CYC/' ...
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 2 ++
arch/powerpc/perf/power7-pmu.c | 18 ++++++++++++++++++
2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 3f21d89..b29fcc6 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -133,3 +133,5 @@ extern ssize_t power_events_sysfs_show(struct device *dev,
#define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g)
#define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g)
+#define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(PM_##_name, _id, _p)
+#define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p)
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index ae5d757..5627940 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -373,6 +373,15 @@ GENERIC_EVENT_ATTR(cache-misses, LD_MISS_L1);
GENERIC_EVENT_ATTR(branch-instructions, BRU_FIN);
GENERIC_EVENT_ATTR(branch-misses, BRU_MPRED);
+POWER_EVENT_ATTR(CYC, CYC);
+POWER_EVENT_ATTR(GCT_NOSLOT_CYC, GCT_NOSLOT_CYC);
+POWER_EVENT_ATTR(CMPLU_STALL, CMPLU_STALL);
+POWER_EVENT_ATTR(INST_CMPL, INST_CMPL);
+POWER_EVENT_ATTR(LD_REF_L1, LD_REF_L1);
+POWER_EVENT_ATTR(LD_MISS_L1, LD_MISS_L1);
+POWER_EVENT_ATTR(BRU_FIN, BRU_FIN)
+POWER_EVENT_ATTR(BRU_MPRED, BRU_MPRED);
+
static struct attribute *power7_events_attr[] = {
GENERIC_EVENT_PTR(CYC),
GENERIC_EVENT_PTR(GCT_NOSLOT_CYC),
@@ -382,6 +391,15 @@ static struct attribute *power7_events_attr[] = {
GENERIC_EVENT_PTR(LD_MISS_L1),
GENERIC_EVENT_PTR(BRU_FIN),
GENERIC_EVENT_PTR(BRU_MPRED),
+
+ POWER_EVENT_PTR(CYC),
+ POWER_EVENT_PTR(GCT_NOSLOT_CYC),
+ POWER_EVENT_PTR(CMPLU_STALL),
+ POWER_EVENT_PTR(INST_CMPL),
+ POWER_EVENT_PTR(LD_REF_L1),
+ POWER_EVENT_PTR(LD_MISS_L1),
+ POWER_EVENT_PTR(BRU_FIN),
+ POWER_EVENT_PTR(BRU_MPRED),
NULL
};
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 5/6][v3] perf: Create a sysfs entry for Power event format
2013-01-10 0:06 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
` (2 preceding siblings ...)
2013-01-10 0:06 ` [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events " sukadev
@ 2013-01-10 0:06 ` sukadev
2013-01-10 0:06 ` [PATCH 6/6][v3] perf: Document the ABI of perf sysfs entries sukadev
4 siblings, 0 replies; 8+ messages in thread
From: sukadev @ 2013-01-10 0:06 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras
Cc: robert.richter, linuxppc-dev, Anton Blanchard, Jiri Olsa,
Arnaldo Carvalho de Melo
Create a sysfs entry, '/sys/bus/event_source/devices/cpu/format/event'
which describes the format of a POWER cpu.
The format of the event is the same for all POWER cpus at least in
(Power6, Power7), so bulk of this change is common in the code common
to POWER cpus.
This code is based on corresponding code in x86.
Changelog[v2]: [Jiri Olsa] Use PMU_FORMAT_ATTR() rather than duplicating it.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 6 ++++++
arch/powerpc/perf/core-book3s.c | 12 ++++++++++++
arch/powerpc/perf/power7-pmu.c | 1 +
3 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index b29fcc6..ee63205 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -135,3 +135,9 @@ extern ssize_t power_events_sysfs_show(struct device *dev,
#define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(PM_##_name, _id, _p)
#define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p)
+
+/*
+ * Format of a perf event is the same on all POWER cpus. Declare a
+ * common sysfs attribute group that individual POWER cpus can share.
+ */
+extern struct attribute_group power_pmu_format_group;
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index fa476d5..4ae044b 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1315,6 +1315,18 @@ ssize_t power_events_sysfs_show(struct device *dev,
return sprintf(page, "event=0x%02llx\n", pmu_attr->id);
}
+PMU_FORMAT_ATTR(event, "config:0-20");
+
+static struct attribute *power_pmu_format_attr[] = {
+ &format_attr_event.attr,
+ NULL,
+};
+
+struct attribute_group power_pmu_format_group = {
+ .name = "format",
+ .attrs = power_pmu_format_attr,
+};
+
struct pmu power_pmu = {
.pmu_enable = power_pmu_enable,
.pmu_disable = power_pmu_disable,
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 5627940..5fb3c9b 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -410,6 +410,7 @@ static struct attribute_group power7_pmu_events_group = {
};
static const struct attribute_group *power7_pmu_attr_groups[] = {
+ &power_pmu_format_group,
&power7_pmu_events_group,
NULL,
};
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 6/6][v3] perf: Document the ABI of perf sysfs entries
2013-01-10 0:06 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
` (3 preceding siblings ...)
2013-01-10 0:06 ` [PATCH 5/6][v3] perf: Create a sysfs entry for Power event format sukadev
@ 2013-01-10 0:06 ` sukadev
4 siblings, 0 replies; 8+ messages in thread
From: sukadev @ 2013-01-10 0:06 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras
Cc: robert.richter, linuxppc-dev, Anton Blanchard, Jiri Olsa,
Arnaldo Carvalho de Melo
This patchset addes two new sets of files to sysfs:
- generic and POWER-specific perf events in /sys/devices/cpu/events/
- perf event config format in /sys/devices/cpu/format/event
Document the format of these files which would become part of the ABI.
Changelog[v3]:
[Greg KH] Include ABI documentation.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
Documentation/ABI/stable/sysfs-devices-cpu-events | 54 +++++++++++++++++++++
Documentation/ABI/stable/sysfs-devices-cpu-format | 27 ++++++++++
2 files changed, 81 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/stable/sysfs-devices-cpu-format
diff --git a/Documentation/ABI/stable/sysfs-devices-cpu-events b/Documentation/ABI/stable/sysfs-devices-cpu-events
index e69de29..f37d542 100644
--- a/Documentation/ABI/stable/sysfs-devices-cpu-events
+++ b/Documentation/ABI/stable/sysfs-devices-cpu-events
@@ -0,0 +1,54 @@
+What: /sys/devices/cpu/events/
+ /sys/devices/cpu/events/branch-misses
+ /sys/devices/cpu/events/cache-references
+ /sys/devices/cpu/events/cache-misses
+ /sys/devices/cpu/events/stalled-cycles-frontend
+ /sys/devices/cpu/events/branch-instructions
+ /sys/devices/cpu/events/stalled-cycles-backend
+ /sys/devices/cpu/events/instructions
+ /sys/devices/cpu/events/cpu-cycles
+
+Date: 2013/01/08
+
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description: Generic performance monitoring events
+
+ A collection of performance monitoring events that may be
+ supported by many/most CPUs. These events can be monitored
+ using the 'perf(1)' tool.
+
+ The contents of each file would look like:
+
+ event=0xNNNN
+
+ where 'N' is a hex digit.
+
+
+What: /sys/devices/cpu/events/PM_LD_MISS_L1
+ /sys/devices/cpu/events/PM_LD_REF_L1
+ /sys/devices/cpu/events/PM_CYC
+ /sys/devices/cpu/events/PM_BRU_FIN
+ /sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+ /sys/devices/cpu/events/PM_BRU_MPRED
+ /sys/devices/cpu/events/PM_INST_CMPL
+ /sys/devices/cpu/events/PM_CMPLU_STALL
+
+Date: 2013/01/08
+
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+ Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description: POWER specific performance monitoring events
+
+ A collection of performance monitoring events that may be
+ supported by the POWER CPU. These events can be monitored
+ using the 'perf(1)' tool.
+
+ These events may not be supported by other CPUs.
+
+ The contents of each file would look like:
+
+ event=0xNNNN
+
+ where 'N' is a hex digit.
diff --git a/Documentation/ABI/stable/sysfs-devices-cpu-format b/Documentation/ABI/stable/sysfs-devices-cpu-format
new file mode 100644
index 0000000..b15cfb2
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-cpu-format
@@ -0,0 +1,27 @@
+What: /sys/devices/cpu/format/
+ /sys/devices/cpu/format/event
+
+Date: 2013/01/08
+
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description: Format of performance monitoring events
+
+ Each CPU/architecture may use different format to represent
+ the perf event. The 'event' file describes the configuration
+ format of the performance monitoring event on the CPU/system.
+
+ The contents of each file would look like:
+
+ config:m-n
+
+ where m and n are the starting and ending bits that are
+ used to represent the event.
+
+ For example, on POWER,
+
+ $ cat /sys/devices/cpu/format/event
+ config:0-20
+
+ meaning that POWER uses the first 20-bits to represent a perf
+ event.
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events available in sysfs
2013-01-10 0:20 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
@ 2013-01-10 0:20 ` sukadev
0 siblings, 0 replies; 8+ messages in thread
From: sukadev @ 2013-01-10 0:20 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras, Ingo Molnar
Cc: Andi Kleen, robert.richter, Anton Blanchard, linux-kernel,
Stephane Eranian, linuxppc-dev, Arnaldo Carvalho de Melo,
Jiri Olsa
Make some POWER7-specific perf events available in sysfs.
$ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
PM_BRU_FIN
PM_BRU_MPRED
PM_CMPLU_STALL
PM_CYC
PM_GCT_NOSLOT_CYC
PM_INST_CMPL
PM_LD_MISS_L1
PM_LD_REF_L1
stalled-cycles-backend
stalled-cycles-frontend
where the 'PM_*' events are POWER specific and the others are the
generic events.
This will enable users to specify these events with their symbolic
names rather than with their raw code.
perf stat -e 'cpu/PM_CYC/' ...
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 2 ++
arch/powerpc/perf/power7-pmu.c | 18 ++++++++++++++++++
2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 3f21d89..b29fcc6 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -133,3 +133,5 @@ extern ssize_t power_events_sysfs_show(struct device *dev,
#define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g)
#define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g)
+#define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(PM_##_name, _id, _p)
+#define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p)
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index ae5d757..5627940 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -373,6 +373,15 @@ GENERIC_EVENT_ATTR(cache-misses, LD_MISS_L1);
GENERIC_EVENT_ATTR(branch-instructions, BRU_FIN);
GENERIC_EVENT_ATTR(branch-misses, BRU_MPRED);
+POWER_EVENT_ATTR(CYC, CYC);
+POWER_EVENT_ATTR(GCT_NOSLOT_CYC, GCT_NOSLOT_CYC);
+POWER_EVENT_ATTR(CMPLU_STALL, CMPLU_STALL);
+POWER_EVENT_ATTR(INST_CMPL, INST_CMPL);
+POWER_EVENT_ATTR(LD_REF_L1, LD_REF_L1);
+POWER_EVENT_ATTR(LD_MISS_L1, LD_MISS_L1);
+POWER_EVENT_ATTR(BRU_FIN, BRU_FIN)
+POWER_EVENT_ATTR(BRU_MPRED, BRU_MPRED);
+
static struct attribute *power7_events_attr[] = {
GENERIC_EVENT_PTR(CYC),
GENERIC_EVENT_PTR(GCT_NOSLOT_CYC),
@@ -382,6 +391,15 @@ static struct attribute *power7_events_attr[] = {
GENERIC_EVENT_PTR(LD_MISS_L1),
GENERIC_EVENT_PTR(BRU_FIN),
GENERIC_EVENT_PTR(BRU_MPRED),
+
+ POWER_EVENT_PTR(CYC),
+ POWER_EVENT_PTR(GCT_NOSLOT_CYC),
+ POWER_EVENT_PTR(CMPLU_STALL),
+ POWER_EVENT_PTR(INST_CMPL),
+ POWER_EVENT_PTR(LD_REF_L1),
+ POWER_EVENT_PTR(LD_MISS_L1),
+ POWER_EVENT_PTR(BRU_FIN),
+ POWER_EVENT_PTR(BRU_MPRED),
NULL
};
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events available in sysfs
2013-01-10 1:03 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events Sukadev Bhattiprolu
@ 2013-01-10 1:06 ` Sukadev Bhattiprolu
0 siblings, 0 replies; 8+ messages in thread
From: Sukadev Bhattiprolu @ 2013-01-10 1:06 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras, Ingo Molnar
Cc: Andi Kleen, robert.richter, Anton Blanchard, linux-kernel,
Stephane Eranian, linuxppc-dev, Arnaldo Carvalho de Melo,
Jiri Olsa
[PATCH 4/6][v3] perf/POWER7: Make some POWER7 events available in sysfs
Make some POWER7-specific perf events available in sysfs.
$ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
PM_BRU_FIN
PM_BRU_MPRED
PM_CMPLU_STALL
PM_CYC
PM_GCT_NOSLOT_CYC
PM_INST_CMPL
PM_LD_MISS_L1
PM_LD_REF_L1
stalled-cycles-backend
stalled-cycles-frontend
where the 'PM_*' events are POWER specific and the others are the
generic events.
This will enable users to specify these events with their symbolic
names rather than with their raw code.
perf stat -e 'cpu/PM_CYC/' ...
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 2 ++
arch/powerpc/perf/power7-pmu.c | 18 ++++++++++++++++++
2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 3f21d89..b29fcc6 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -133,3 +133,5 @@ extern ssize_t power_events_sysfs_show(struct device *dev,
#define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g)
#define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g)
+#define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(PM_##_name, _id, _p)
+#define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p)
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index ae5d757..5627940 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -373,6 +373,15 @@ GENERIC_EVENT_ATTR(cache-misses, LD_MISS_L1);
GENERIC_EVENT_ATTR(branch-instructions, BRU_FIN);
GENERIC_EVENT_ATTR(branch-misses, BRU_MPRED);
+POWER_EVENT_ATTR(CYC, CYC);
+POWER_EVENT_ATTR(GCT_NOSLOT_CYC, GCT_NOSLOT_CYC);
+POWER_EVENT_ATTR(CMPLU_STALL, CMPLU_STALL);
+POWER_EVENT_ATTR(INST_CMPL, INST_CMPL);
+POWER_EVENT_ATTR(LD_REF_L1, LD_REF_L1);
+POWER_EVENT_ATTR(LD_MISS_L1, LD_MISS_L1);
+POWER_EVENT_ATTR(BRU_FIN, BRU_FIN)
+POWER_EVENT_ATTR(BRU_MPRED, BRU_MPRED);
+
static struct attribute *power7_events_attr[] = {
GENERIC_EVENT_PTR(CYC),
GENERIC_EVENT_PTR(GCT_NOSLOT_CYC),
@@ -382,6 +391,15 @@ static struct attribute *power7_events_attr[] = {
GENERIC_EVENT_PTR(LD_MISS_L1),
GENERIC_EVENT_PTR(BRU_FIN),
GENERIC_EVENT_PTR(BRU_MPRED),
+
+ POWER_EVENT_PTR(CYC),
+ POWER_EVENT_PTR(GCT_NOSLOT_CYC),
+ POWER_EVENT_PTR(CMPLU_STALL),
+ POWER_EVENT_PTR(INST_CMPL),
+ POWER_EVENT_PTR(LD_REF_L1),
+ POWER_EVENT_PTR(LD_MISS_L1),
+ POWER_EVENT_PTR(BRU_FIN),
+ POWER_EVENT_PTR(BRU_MPRED),
NULL
};
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-01-10 1:06 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-10 0:06 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
2013-01-10 0:06 ` [PATCH 2/6][v3] perf: Make EVENT_ATTR global sukadev
2013-01-10 0:06 ` [PATCH 3/6][v3] perf/POWER7: Make generic event translations available in sysfs sukadev
2013-01-10 0:06 ` [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events " sukadev
2013-01-10 0:06 ` [PATCH 5/6][v3] perf: Create a sysfs entry for Power event format sukadev
2013-01-10 0:06 ` [PATCH 6/6][v3] perf: Document the ABI of perf sysfs entries sukadev
-- strict thread matches above, loose matches on Subject: below --
2013-01-10 0:20 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events sukadev
2013-01-10 0:20 ` [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events available in sysfs sukadev
2013-01-10 1:03 [PATCH 1/6][v3] perf/Power7: Use macros to identify perf events Sukadev Bhattiprolu
2013-01-10 1:06 ` [PATCH 4/6][v3] perf/POWER7: Make some POWER7 events available in sysfs Sukadev Bhattiprolu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).