linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Scott Wood <scottwood@freescale.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: Scott Wood <scottwood@freescale.com>, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 2/2] powerpc/fsl: remove CONFIG_IRQ_ALL_CPUS from mpc85xx/mpc86xx defconfig
Date: Fri, 11 Jan 2013 17:38:41 -0600	[thread overview]
Message-ID: <1357947521-26680-2-git-send-email-scottwood@freescale.com> (raw)
In-Reply-To: <1357947521-26680-1-git-send-email-scottwood@freescale.com>

While this should be harmless now that distribute_irqs
obeys MPIC_SINGLE_DEST_CPU, there's no reason to enable this
on mpc85xx/mpc86xx since MPIC_SINGLE_DEST_CPU will always be set.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/85xx/ge_imp3a_defconfig   |    1 -
 arch/powerpc/configs/86xx/gef_ppc9a_defconfig  |    1 -
 arch/powerpc/configs/86xx/gef_sbc310_defconfig |    1 -
 arch/powerpc/configs/86xx/gef_sbc610_defconfig |    1 -
 arch/powerpc/configs/86xx/sbc8641d_defconfig   |    1 -
 arch/powerpc/configs/corenet32_smp_defconfig   |    1 -
 arch/powerpc/configs/corenet64_smp_defconfig   |    1 -
 arch/powerpc/configs/mpc85xx_smp_defconfig     |    1 -
 8 files changed, 8 deletions(-)

diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
index f8c51a4..c9765b5 100644
--- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig
+++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
@@ -34,7 +34,6 @@ CONFIG_PREEMPT=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index da731c2..f2f6734 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -25,7 +25,6 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 CONFIG_BINFMT_MISC=m
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 2149360..be73219 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -25,7 +25,6 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 CONFIG_BINFMT_MISC=y
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index af2e8e1..b3e2b10 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -25,7 +25,6 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 CONFIG_BINFMT_MISC=m
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 0a92ca0..1a62baf 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -23,7 +23,6 @@ CONFIG_SBC8641D=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_BINFMT_MISC=m
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 1c0f243..60027c2 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -32,7 +32,6 @@ CONFIG_HIGHMEM=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_KEXEC=y
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 88fa5c4..7375961 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -26,7 +26,6 @@ CONFIG_P5020_DS=y
 CONFIG_P5040_DS=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 502cd9e..8d00ea5b 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -49,7 +49,6 @@ CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_IRQ_ALL_CPUS=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-- 
1.7.9.5

  reply	other threads:[~2013-01-11 23:38 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-11 23:38 [PATCH 1/2] powerpc/mpic: make distribute_irqs obey MPIC_SINGLE_DEST_CPU Scott Wood
2013-01-11 23:38 ` Scott Wood [this message]
  -- strict thread matches above, loose matches on Subject: below --
2013-01-22  1:56 [PATCH 1/2] powerpc/mpic: allow coreint to be determined by MPIC version Scott Wood
2013-01-22  1:56 ` [PATCH 2/2] powerpc/fsl: remove CONFIG_IRQ_ALL_CPUS from mpc85xx/mpc86xx defconfig Scott Wood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1357947521-26680-2-git-send-email-scottwood@freescale.com \
    --to=scottwood@freescale.com \
    --cc=galak@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).