* [PATCH v6 0/3] *** SUBJECT HERE ***
@ 2013-01-17 10:01 Peter Chen
2013-01-17 10:01 ` [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id Peter Chen
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Peter Chen @ 2013-01-17 10:01 UTC (permalink / raw)
To: shawn.guo, balbi, kernel, gregkh, r58472
Cc: linux-usb, linuxppc-dev, linux-arm-kernel
Changes for v6:
- Only using imx-udc-mx27 and imx-udc-mx51 stands for
all kinds of i.mx udc
- Fix below build error for platform_device_id at fsl_udc_core.c
drivers/usb/gadget/fsl_usb2_udc: struct platform_device_id is 24 bytes.? The last of 5 is:
| 0x69 0x6d 0x78 0x2d 0x75 0x64 0x63 0x2d 0x6d 0x78 0x35 0x31 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+0x00 0x00 0x00
| FATAL: drivers/usb/gadget/fsl_usb2_udc: struct platform_device_id is not terminated with a NULL entry!
| make[1]: *** [__modpost] Error 1
Changes for v5:
- Using strcmp to get specific SoC
- Delete one cpu_is_mx35() as it has already pdata runtime check
Changes for v4:
- Using pdev's struct resource to do ioremap
- Add ioremap return value check
Changes for v3:
- Split the one big patch into three patches
Changes for v2:
- Add const for fsl_udc_devtype
- Do ioremap for phy address at fsl-mxc-udc
Peter Chen (3):
usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id
usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
ARM: i.MX clock: Change the connection-id for fsl-usb2-udc
arch/arm/mach-imx/clk-imx25.c | 6 +-
arch/arm/mach-imx/clk-imx27.c | 6 +-
arch/arm/mach-imx/clk-imx31.c | 6 +-
arch/arm/mach-imx/clk-imx35.c | 6 +-
arch/arm/mach-imx/clk-imx51-imx53.c | 6 +-
arch/arm/mach-imx/devices/devices-common.h | 1 +
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 ++++---
drivers/usb/gadget/fsl_mxc_udc.c | 40 +++++++++++++-------
drivers/usb/gadget/fsl_udc_core.c | 42 ++++++++++++--------
drivers/usb/gadget/fsl_usb2_udc.h | 5 +-
10 files changed, 78 insertions(+), 55 deletions(-)
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id 2013-01-17 10:01 [PATCH v6 0/3] *** SUBJECT HERE *** Peter Chen @ 2013-01-17 10:01 ` Peter Chen 2013-01-17 11:13 ` Fabio Estevam 2013-01-17 10:01 ` [PATCH v6 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap Peter Chen 2013-01-17 10:01 ` [PATCH v6 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc Peter Chen 2 siblings, 1 reply; 9+ messages in thread From: Peter Chen @ 2013-01-17 10:01 UTC (permalink / raw) To: shawn.guo, balbi, kernel, gregkh, r58472 Cc: linux-usb, linuxppc-dev, linux-arm-kernel As mach/hardware.h is deleted, we need to use platform_device_id to differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has already used pdata to differentiate runtime Meanwhile we update the platform code accordingly. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- arch/arm/mach-imx/devices/devices-common.h | 1 + arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 ++++---- drivers/usb/gadget/fsl_mxc_udc.c | 24 +++++-------- drivers/usb/gadget/fsl_udc_core.c | 38 ++++++++++++--------- 4 files changed, 41 insertions(+), 37 deletions(-) diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 6277baf..9bd5777 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan( #include <linux/fsl_devices.h> struct imx_fsl_usb2_udc_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 37e4439..3c06bd9 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -11,35 +11,36 @@ #include "../hardware.h" #include "devices-common.h" -#define imx_fsl_usb2_udc_data_entry_single(soc) \ +#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _USB_OTG_BASE_ADDR, \ .irq = soc ## _INT_USB_OTG, \ } #ifdef CONFIG_SOC_IMX25 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25); + imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX27); + imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX31); + imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX35); + imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27"); #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX51); + imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51"); #endif struct platform_device *__init imx_add_fsl_usb2_udc( @@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("fsl-usb2-udc", -1, + return imx_add_platform_device_dmamask(data->devid, -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 1b0f086..de851e5 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -18,8 +18,6 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/hardware.h> - static struct clk *mxc_ahb_clk; static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; @@ -59,7 +57,7 @@ int fsl_udc_clk_init(struct platform_device *pdev) clk_prepare_enable(mxc_per_clk); /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - if (!cpu_is_mx51()) { + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { freq = clk_get_rate(mxc_per_clk); if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { @@ -82,17 +80,15 @@ eclkrate: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - if (cpu_is_mx35()) { - unsigned int v; - - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - } + unsigned int v; + + /* workaround ENGcm09152 for i.MX35 */ + if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); + writel(v | USBPHYCTRL_EVDO, + MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); } /* ULPI transceivers don't need usbpll */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index c19f7f1..5fc1d72 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -41,6 +41,7 @@ #include <linux/fsl_devices.h> #include <linux/dmapool.h> #include <linux/delay.h> +#include <linux/of_device.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -2438,11 +2439,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev) unsigned int i; u32 dccparams; - if (strcmp(pdev->name, driver_name)) { - VDBG("Wrong device"); - return -ENODEV; - } - udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); if (udc_controller == NULL) { ERR("malloc udc failed\n"); @@ -2756,22 +2752,32 @@ static int fsl_udc_otg_resume(struct device *dev) return fsl_udc_resume(NULL); } - /*------------------------------------------------------------------------- Register entry point for the peripheral controller driver --------------------------------------------------------------------------*/ - +static const struct platform_device_id fsl_udc_devtype[] = { + { + .name = "imx-udc-mx27", + }, { + .name = "imx-udc-mx51", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { - .remove = __exit_p(fsl_udc_remove), + .remove = __exit_p(fsl_udc_remove), + /* Just for FSL i.mx SoC currently */ + .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ - .suspend = fsl_udc_suspend, - .resume = fsl_udc_resume, - .driver = { - .name = (char *)driver_name, - .owner = THIS_MODULE, - /* udc suspend/resume called from OTG driver */ - .suspend = fsl_udc_otg_suspend, - .resume = fsl_udc_otg_resume, + .suspend = fsl_udc_suspend, + .resume = fsl_udc_resume, + .driver = { + .name = (char *)driver_name, + .owner = THIS_MODULE, + /* udc suspend/resume called from OTG driver */ + .suspend = fsl_udc_otg_suspend, + .resume = fsl_udc_otg_resume, }, }; -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id 2013-01-17 10:01 ` [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id Peter Chen @ 2013-01-17 11:13 ` Fabio Estevam 2013-01-17 11:25 ` Lothar Waßmann 0 siblings, 1 reply; 9+ messages in thread From: Fabio Estevam @ 2013-01-17 11:13 UTC (permalink / raw) To: Peter Chen Cc: r58472, gregkh, linux-usb, balbi, kernel, shawn.guo, linuxppc-dev, linux-arm-kernel On Thu, Jan 17, 2013 at 8:01 AM, Peter Chen <peter.chen@freescale.com> wrote: > /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ > - if (!cpu_is_mx51()) { > + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {]] Shouldn't this be: if (!strcmp(pdev->id_entry->name, "imx-udc-mx51")) ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id 2013-01-17 11:13 ` Fabio Estevam @ 2013-01-17 11:25 ` Lothar Waßmann 2013-01-17 14:43 ` Fabio Estevam 0 siblings, 1 reply; 9+ messages in thread From: Lothar Waßmann @ 2013-01-17 11:25 UTC (permalink / raw) To: Fabio Estevam Cc: r58472, gregkh, linux-usb, balbi, Peter Chen, kernel, shawn.guo, linuxppc-dev, linux-arm-kernel Hi, Fabio Estevam writes: > On Thu, Jan 17, 2013 at 8:01 AM, Peter Chen <peter.chen@freescale.com> wrote: > > > /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ > > - if (!cpu_is_mx51()) { > > + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {]] > > Shouldn't this be: > if (!strcmp(pdev->id_entry->name, "imx-udc-mx51")) > The equivalent of !cpu_is_mx51() would be strcmp(pdev->id_entry->name, "imx-udc-mx51") (without the '!') meaning id_entry->name is different from "imx-udc-mx51". I personally hate the '!strcmp()' notation and prefer 'strcmp() == 0' though they are technically equivalent. Using '==' makes it much clearer to the reader what is intended. !strcmp() lets one assume that it is true when the comparison fails, though actually the opposite is true. Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id 2013-01-17 11:25 ` Lothar Waßmann @ 2013-01-17 14:43 ` Fabio Estevam 2013-01-18 1:51 ` Peter Chen 0 siblings, 1 reply; 9+ messages in thread From: Fabio Estevam @ 2013-01-17 14:43 UTC (permalink / raw) To: Lothar Waßmann Cc: r58472, gregkh, linux-usb, balbi, Peter Chen, kernel, shawn.guo, linuxppc-dev, linux-arm-kernel On Thu, Jan 17, 2013 at 9:25 AM, Lothar Wa=C3=9Fmann <LW@karo-electronics.d= e> wrote: > The equivalent of !cpu_is_mx51() would be > strcmp(pdev->id_entry->name, "imx-udc-mx51") (without the '!') meaning > id_entry->name is different from "imx-udc-mx51". Yes, agree. strcmp(pdev->id_entry->name, "imx-udc-mx51") is also better than !strcmp(pdev->id_entry->name, "imx-udc-mx27")) because in the case of another soc entry gets added, let's say "imx-udc-mxyy" then !strcmp(pdev->id_entry->name, "imx-udc-mx27")) will not correspond to !cpu_is_mx51() anymore. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id 2013-01-17 14:43 ` Fabio Estevam @ 2013-01-18 1:51 ` Peter Chen 0 siblings, 0 replies; 9+ messages in thread From: Peter Chen @ 2013-01-18 1:51 UTC (permalink / raw) To: Fabio Estevam Cc: r58472, gregkh, linux-usb, balbi, kernel, shawn.guo, linuxppc-dev, linux-arm-kernel, Lothar Waßmann On Thu, Jan 17, 2013 at 12:43:23PM -0200, Fabio Estevam wrote: > On Thu, Jan 17, 2013 at 9:25 AM, Lothar Wa=DFmann <LW@karo-electronics.= de> wrote: >=20 > > The equivalent of !cpu_is_mx51() would be > > strcmp(pdev->id_entry->name, "imx-udc-mx51") (without the '!') meanin= g > > id_entry->name is different from "imx-udc-mx51". Thanks, Lothar and Fabio, I will change, and send v7. >=20 > Yes, agree. >=20 > strcmp(pdev->id_entry->name, "imx-udc-mx51") is also better than > !strcmp(pdev->id_entry->name, "imx-udc-mx27")) We just think this feature only belongs to imx-udc-mx27 type udc >=20 > because in the case of another soc entry gets added, let's say > "imx-udc-mxyy" then >=20 > !strcmp(pdev->id_entry->name, "imx-udc-mx27")) will not correspond to > !cpu_is_mx51() anymore. >=20 --=20 Best Regards, Peter Chen ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap 2013-01-17 10:01 [PATCH v6 0/3] *** SUBJECT HERE *** Peter Chen 2013-01-17 10:01 ` [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id Peter Chen @ 2013-01-17 10:01 ` Peter Chen 2013-01-17 10:01 ` [PATCH v6 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc Peter Chen 2 siblings, 0 replies; 9+ messages in thread From: Peter Chen @ 2013-01-17 10:01 UTC (permalink / raw) To: shawn.guo, balbi, kernel, gregkh, r58472 Cc: linux-usb, linuxppc-dev, linux-arm-kernel As mach/hardware.h is deleted, we can't visit platform code at driver. It has no phy driver to combine with this controller, so it has to use ioremap to map phy address as a workaround. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- drivers/usb/gadget/fsl_mxc_udc.c | 30 +++++++++++++++++++++++------- drivers/usb/gadget/fsl_udc_core.c | 4 +++- drivers/usb/gadget/fsl_usb2_udc.h | 5 +++-- 3 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index de851e5..d3bd7b0 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -23,7 +23,8 @@ static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ -#define USBPHYCTRL_OTGBASE_OFFSET 0x608 +#define MX35_USBPHYCTRL_OFFSET 0x600 +#define USBPHYCTRL_OTGBASE_OFFSET 0x8 #define USBPHYCTRL_EVDO (1 << 23) int fsl_udc_clk_init(struct platform_device *pdev) @@ -77,25 +78,40 @@ eclkrate: return ret; } -void fsl_udc_clk_finalize(struct platform_device *pdev) +int fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - unsigned int v; + int ret = 0; /* workaround ENGcm09152 for i.MX35 */ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + unsigned int v; + struct resource *res = platform_get_resource + (pdev, IORESOURCE_MEM, 0); + void __iomem *phy_regs = ioremap(res->start + + MX35_USBPHYCTRL_OFFSET, 512); + if (!phy_regs) { + dev_err(&pdev->dev, "ioremap for phy address fails\n"); + ret = -EINVAL; + goto ioremap_err; + } + + v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + + iounmap(phy_regs); } + +ioremap_err: /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { clk_disable_unprepare(mxc_per_clk); mxc_per_clk = NULL; } + + return ret; } void fsl_udc_clk_release(void) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5fc1d72..667275c 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2543,7 +2543,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev) dr_controller_setup(udc_controller); } - fsl_udc_clk_finalize(pdev); + ret = fsl_udc_clk_finalize(pdev); + if (ret) + goto err_free_irq; /* Setup gadget structure */ udc_controller->gadget.ops = &fsl_gadget_ops; diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index f61a967..c6703bb 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -void fsl_udc_clk_finalize(struct platform_device *pdev); +int fsl_udc_clk_finalize(struct platform_device *pdev); void fsl_udc_clk_release(void); #else static inline int fsl_udc_clk_init(struct platform_device *pdev) { return 0; } -static inline void fsl_udc_clk_finalize(struct platform_device *pdev) +static inline int fsl_udc_clk_finalize(struct platform_device *pdev) { + return 0; } static inline void fsl_udc_clk_release(void) { -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc 2013-01-17 10:01 [PATCH v6 0/3] *** SUBJECT HERE *** Peter Chen 2013-01-17 10:01 ` [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id Peter Chen 2013-01-17 10:01 ` [PATCH v6 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap Peter Chen @ 2013-01-17 10:01 ` Peter Chen 2 siblings, 0 replies; 9+ messages in thread From: Peter Chen @ 2013-01-17 10:01 UTC (permalink / raw) To: shawn.guo, balbi, kernel, gregkh, r58472 Cc: linux-usb, linuxppc-dev, linux-arm-kernel As we use platform_device_id for fsl-usb2-udc driver, it needs to change clk connection-id, or the related devm_clk_get will be failed. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- arch/arm/mach-imx/clk-imx25.c | 6 +++--- arch/arm/mach-imx/clk-imx27.c | 6 +++--- arch/arm/mach-imx/clk-imx31.c | 6 +++--- arch/arm/mach-imx/clk-imx35.c | 6 +++--- arch/arm/mach-imx/clk-imx51-imx53.c | 6 +++--- 5 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index b197aa7..2c570cd 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -254,9 +254,9 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); /* i.mx25 has the i.mx35 type cspi */ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 4c1d1e4..1ffe3b5 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8be64e0..16ccbd4 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); /* i.mx31 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 66f3d65..f0727e8 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -251,9 +251,9 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); + clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); + clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 579023f..fb7cb84 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2"); clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc"); - clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc"); + clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51"); + clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51"); clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 0/3] Fix the Build error for fsl_mxc_udc.c @ 2013-01-17 10:03 Peter Chen 2013-01-17 10:03 ` [PATCH v6 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap Peter Chen 0 siblings, 1 reply; 9+ messages in thread From: Peter Chen @ 2013-01-17 10:03 UTC (permalink / raw) To: shawn.guo, balbi, kernel, gregkh, r58472 Cc: linux-usb, linuxppc-dev, linux-arm-kernel Changes for v6: - Only using imx-udc-mx27 and imx-udc-mx51 stands for all kinds of i.mx udc - Fix below build error for platform_device_id at fsl_udc_core.c drivers/usb/gadget/fsl_usb2_udc: struct platform_device_id is 24 bytes.? The last of 5 is: | 0x69 0x6d 0x78 0x2d 0x75 0x64 0x63 0x2d 0x6d 0x78 0x35 0x31 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 +0x00 0x00 0x00 | FATAL: drivers/usb/gadget/fsl_usb2_udc: struct platform_device_id is not terminated with a NULL entry! | make[1]: *** [__modpost] Error 1 Changes for v5: - Using strcmp to get specific SoC - Delete one cpu_is_mx35() as it has already pdata runtime check Changes for v4: - Using pdev's struct resource to do ioremap - Add ioremap return value check Changes for v3: - Split the one big patch into three patches Changes for v2: - Add const for fsl_udc_devtype - Do ioremap for phy address at fsl-mxc-udc Peter Chen (3): usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap ARM: i.MX clock: Change the connection-id for fsl-usb2-udc arch/arm/mach-imx/clk-imx25.c | 6 +- arch/arm/mach-imx/clk-imx27.c | 6 +- arch/arm/mach-imx/clk-imx31.c | 6 +- arch/arm/mach-imx/clk-imx35.c | 6 +- arch/arm/mach-imx/clk-imx51-imx53.c | 6 +- arch/arm/mach-imx/devices/devices-common.h | 1 + arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 ++++--- drivers/usb/gadget/fsl_mxc_udc.c | 40 +++++++++++++------- drivers/usb/gadget/fsl_udc_core.c | 42 ++++++++++++-------- drivers/usb/gadget/fsl_usb2_udc.h | 5 +- 10 files changed, 78 insertions(+), 55 deletions(-) ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap 2013-01-17 10:03 [PATCH v6 0/3] Fix the Build error for fsl_mxc_udc.c Peter Chen @ 2013-01-17 10:03 ` Peter Chen 0 siblings, 0 replies; 9+ messages in thread From: Peter Chen @ 2013-01-17 10:03 UTC (permalink / raw) To: shawn.guo, balbi, kernel, gregkh, r58472 Cc: linux-usb, linuxppc-dev, linux-arm-kernel As mach/hardware.h is deleted, we can't visit platform code at driver. It has no phy driver to combine with this controller, so it has to use ioremap to map phy address as a workaround. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- drivers/usb/gadget/fsl_mxc_udc.c | 30 +++++++++++++++++++++++------- drivers/usb/gadget/fsl_udc_core.c | 4 +++- drivers/usb/gadget/fsl_usb2_udc.h | 5 +++-- 3 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index de851e5..d3bd7b0 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -23,7 +23,8 @@ static struct clk *mxc_per_clk; static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ -#define USBPHYCTRL_OTGBASE_OFFSET 0x608 +#define MX35_USBPHYCTRL_OFFSET 0x600 +#define USBPHYCTRL_OTGBASE_OFFSET 0x8 #define USBPHYCTRL_EVDO (1 << 23) int fsl_udc_clk_init(struct platform_device *pdev) @@ -77,25 +78,40 @@ eclkrate: return ret; } -void fsl_udc_clk_finalize(struct platform_device *pdev) +int fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - unsigned int v; + int ret = 0; /* workaround ENGcm09152 for i.MX35 */ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + unsigned int v; + struct resource *res = platform_get_resource + (pdev, IORESOURCE_MEM, 0); + void __iomem *phy_regs = ioremap(res->start + + MX35_USBPHYCTRL_OFFSET, 512); + if (!phy_regs) { + dev_err(&pdev->dev, "ioremap for phy address fails\n"); + ret = -EINVAL; + goto ioremap_err; + } + + v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + + iounmap(phy_regs); } + +ioremap_err: /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { clk_disable_unprepare(mxc_per_clk); mxc_per_clk = NULL; } + + return ret; } void fsl_udc_clk_release(void) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5fc1d72..667275c 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2543,7 +2543,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev) dr_controller_setup(udc_controller); } - fsl_udc_clk_finalize(pdev); + ret = fsl_udc_clk_finalize(pdev); + if (ret) + goto err_free_irq; /* Setup gadget structure */ udc_controller->gadget.ops = &fsl_gadget_ops; diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index f61a967..c6703bb 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); -void fsl_udc_clk_finalize(struct platform_device *pdev); +int fsl_udc_clk_finalize(struct platform_device *pdev); void fsl_udc_clk_release(void); #else static inline int fsl_udc_clk_init(struct platform_device *pdev) { return 0; } -static inline void fsl_udc_clk_finalize(struct platform_device *pdev) +static inline int fsl_udc_clk_finalize(struct platform_device *pdev) { + return 0; } static inline void fsl_udc_clk_release(void) { -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-01-18 1:52 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-01-17 10:01 [PATCH v6 0/3] *** SUBJECT HERE *** Peter Chen 2013-01-17 10:01 ` [PATCH v6 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id Peter Chen 2013-01-17 11:13 ` Fabio Estevam 2013-01-17 11:25 ` Lothar Waßmann 2013-01-17 14:43 ` Fabio Estevam 2013-01-18 1:51 ` Peter Chen 2013-01-17 10:01 ` [PATCH v6 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap Peter Chen 2013-01-17 10:01 ` [PATCH v6 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc Peter Chen -- strict thread matches above, loose matches on Subject: below -- 2013-01-17 10:03 [PATCH v6 0/3] Fix the Build error for fsl_mxc_udc.c Peter Chen 2013-01-17 10:03 ` [PATCH v6 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap Peter Chen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).