From: Peter Chen <peter.chen@freescale.com>
To: <shawn.guo@linaro.org>, <balbi@ti.com>, <kernel@pengutronix.de>,
<gregkh@linuxfoundation.org>, <r58472@freescale.com>
Cc: linux-usb@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 2/3] usb: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
Date: Fri, 18 Jan 2013 10:15:48 +0800 [thread overview]
Message-ID: <1358475349-27710-3-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1358475349-27710-1-git-send-email-peter.chen@freescale.com>
As mach/hardware.h is deleted, we can't visit platform code at driver.
It has no phy driver to combine with this controller, so it has to use
ioremap to map phy address as a workaround.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
drivers/usb/gadget/fsl_mxc_udc.c | 30 +++++++++++++++++++++++-------
drivers/usb/gadget/fsl_udc_core.c | 4 +++-
drivers/usb/gadget/fsl_usb2_udc.h | 5 +++--
3 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index aa81ac5..f1aeb5c 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -23,7 +23,8 @@ static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
/* workaround ENGcm09152 for i.MX35 */
-#define USBPHYCTRL_OTGBASE_OFFSET 0x608
+#define MX35_USBPHYCTRL_OFFSET 0x600
+#define USBPHYCTRL_OTGBASE_OFFSET 0x8
#define USBPHYCTRL_EVDO (1 << 23)
int fsl_udc_clk_init(struct platform_device *pdev)
@@ -81,25 +82,40 @@ eclkrate:
return ret;
}
-void fsl_udc_clk_finalize(struct platform_device *pdev)
+int fsl_udc_clk_finalize(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
- unsigned int v;
+ int ret = 0;
/* workaround ENGcm09152 for i.MX35 */
if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ unsigned int v;
+ struct resource *res = platform_get_resource
+ (pdev, IORESOURCE_MEM, 0);
+ void __iomem *phy_regs = ioremap(res->start +
+ MX35_USBPHYCTRL_OFFSET, 512);
+ if (!phy_regs) {
+ dev_err(&pdev->dev, "ioremap for phy address fails\n");
+ ret = -EINVAL;
+ goto ioremap_err;
+ }
+
+ v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
writel(v | USBPHYCTRL_EVDO,
- MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
+
+ iounmap(phy_regs);
}
+
+ioremap_err:
/* ULPI transceivers don't need usbpll */
if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
clk_disable_unprepare(mxc_per_clk);
mxc_per_clk = NULL;
}
+
+ return ret;
}
void fsl_udc_clk_release(void)
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 5fc1d72..667275c 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -2543,7 +2543,9 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
dr_controller_setup(udc_controller);
}
- fsl_udc_clk_finalize(pdev);
+ ret = fsl_udc_clk_finalize(pdev);
+ if (ret)
+ goto err_free_irq;
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f61a967..c6703bb 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -592,15 +592,16 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
struct platform_device;
#ifdef CONFIG_ARCH_MXC
int fsl_udc_clk_init(struct platform_device *pdev);
-void fsl_udc_clk_finalize(struct platform_device *pdev);
+int fsl_udc_clk_finalize(struct platform_device *pdev);
void fsl_udc_clk_release(void);
#else
static inline int fsl_udc_clk_init(struct platform_device *pdev)
{
return 0;
}
-static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+static inline int fsl_udc_clk_finalize(struct platform_device *pdev)
{
+ return 0;
}
static inline void fsl_udc_clk_release(void)
{
--
1.7.0.4
next prev parent reply other threads:[~2013-01-18 2:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-18 2:15 [PATCH v7 0/3] Fix the Build error for fsl_mxc_udc.c Peter Chen
2013-01-18 2:15 ` [PATCH v7 1/3] usb: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id Peter Chen
2013-01-18 2:15 ` Peter Chen [this message]
2013-01-18 2:15 ` [PATCH v7 3/3] ARM: i.MX clock: Change the connection-id for fsl-usb2-udc Peter Chen
2013-01-18 2:23 ` Shawn Guo
2013-01-18 2:45 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358475349-27710-3-git-send-email-peter.chen@freescale.com \
--to=peter.chen@freescale.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=r58472@freescale.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).