linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anatolij Gustschin <agust@denx.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH] powerpc/512x: add function for CS parameter configuration
Date: Fri,  1 Feb 2013 14:28:25 +0100	[thread overview]
Message-ID: <1359725305-23916-1-git-send-email-agust@denx.de> (raw)

Add ability to configure CS parameters for devices that need
different CS parameters setup after their configuration. I.e.
an FPGA device on LP bus can require different CS parameters
for its bus interface after loading firmware into it. A driver
can easily reconfigure the LPC CS parameters using this function.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/powerpc/include/asm/mpc5121.h           |   16 +++++++++++++
 arch/powerpc/platforms/512x/mpc512x_shared.c |   30 ++++++++++++++++++++++++++
 2 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 8c0ab2c..738ebca 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -53,4 +53,20 @@ struct mpc512x_ccm {
 	u32	m4ccr;	/* MSCAN4 CCR */
 	u8	res[0x98]; /* Reserved */
 };
+
+/*
+ * LPC Module
+ */
+struct mpc512x_lpc {
+	u32	cs_cfg[8];	/* CS config */
+	u32	cs_ctrl;	/* CS Control Register */
+	u32	cs_status;	/* CS Status Register */
+	u32	burst_ctrl;	/* CS Burst Control Register */
+	u32	deadcycle_ctrl;	/* CS Deadcycle Control Register */
+	u32	holdcycle_ctrl;	/* CS Holdcycle Control Register */
+	u32	alt;		/* Address Latch Timing Register */
+};
+
+int mpc512x_cs_config(int cs, u32 val);
+
 #endif /* __ASM_POWERPC_MPC5121_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index c344438..112b4f6 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -436,3 +436,33 @@ void __init mpc512x_init(void)
 	mpc512x_restart_init();
 	mpc512x_psc_fifo_init();
 }
+
+/**
+ * mpc512x_cs_config - Setup chip select configuration
+ * @cs: chip select number
+ * @val: chip select configuration value
+ *
+ * Perform chip select configuration for devices on LocalPlus Bus.
+ * Intended to dynamically reconfigure the chip select parameters
+ * for configurable devices on the bus.
+ */
+int mpc512x_cs_config(int cs, u32 val)
+{
+	static struct mpc512x_lpc __iomem *lpc;
+	struct device_node *np;
+
+	if (cs < 0 || cs > 7)
+		return -EINVAL;
+
+	if (!lpc) {
+		np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-lpc");
+		lpc = of_iomap(np, 0);
+		of_node_put(np);
+		if (!lpc)
+			return -ENOMEM;
+	}
+
+	out_be32(&lpc->cs_cfg[cs], val);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mpc512x_cs_config);
-- 
1.7.5.4

             reply	other threads:[~2013-02-01 13:28 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-01 13:28 Anatolij Gustschin [this message]
2013-02-02  4:31 ` [PATCH] powerpc/512x: add function for CS parameter configuration Timur Tabi
2013-02-02 12:02   ` Anatolij Gustschin
2013-02-02 12:31     ` Timur Tabi
2013-02-04 10:16 ` [PATCH v2] powerpc/512x: add function for chip select " Anatolij Gustschin
2013-02-04 21:22   ` Timur Tabi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359725305-23916-1-git-send-email-agust@denx.de \
    --to=agust@denx.de \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).