From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>,
Alexey Kardashevskiy <aik@ozlabs.ru>,
linux-kernel@vger.kernel.org, Paul Mackerras <paulus@samba.org>,
linuxppc-dev@lists.ozlabs.org,
David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH] powerpc: fixing ptrace_get_reg to return an error
Date: Fri, 15 Feb 2013 14:44:23 +1100 [thread overview]
Message-ID: <1360899863-17181-1-git-send-email-aik@ozlabs.ru> (raw)
In-Reply-To: <1358273835.2782.5.camel@pasglop>
Currently ptrace_get_reg returns error as a value
what make impossible to tell whether it is a correct value or error code.
The patch adds a parameter which points to the real return data and
returns an error code.
As get_user_msr() never fails and it is used in multiple places so it has not
been changed by this patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
arch/powerpc/include/asm/ptrace.h | 3 ++-
arch/powerpc/kernel/ptrace.c | 29 ++++++++++++++++++-----------
arch/powerpc/kernel/ptrace32.c | 15 ++++++++++++---
3 files changed, 32 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 5f99568..becc08e 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -92,7 +92,8 @@ static inline long regs_return_value(struct pt_regs *regs)
} while(0)
struct task_struct;
-extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
+extern int ptrace_get_reg(struct task_struct *task, int regno,
+ unsigned long *data);
extern int ptrace_put_reg(struct task_struct *task, int regno,
unsigned long data);
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 245c1b6..d5ff7ea 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -180,9 +180,10 @@ static int set_user_msr(struct task_struct *task, unsigned long msr)
}
#ifdef CONFIG_PPC64
-static unsigned long get_user_dscr(struct task_struct *task)
+static int get_user_dscr(struct task_struct *task, unsigned long *data)
{
- return task->thread.dscr;
+ *data = task->thread.dscr;
+ return 0;
}
static int set_user_dscr(struct task_struct *task, unsigned long dscr)
@@ -192,7 +193,7 @@ static int set_user_dscr(struct task_struct *task, unsigned long dscr)
return 0;
}
#else
-static unsigned long get_user_dscr(struct task_struct *task)
+static int get_user_dscr(struct task_struct *task, unsigned long *data)
{
return -EIO;
}
@@ -216,19 +217,23 @@ static int set_user_trap(struct task_struct *task, unsigned long trap)
/*
* Get contents of register REGNO in task TASK.
*/
-unsigned long ptrace_get_reg(struct task_struct *task, int regno)
+int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
{
- if (task->thread.regs == NULL)
+ if ((task->thread.regs == NULL) || !data)
return -EIO;
- if (regno == PT_MSR)
- return get_user_msr(task);
+ if (regno == PT_MSR) {
+ *data = get_user_msr(task);
+ return 0;
+ }
if (regno == PT_DSCR)
- return get_user_dscr(task);
+ return get_user_dscr(task, data);
- if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long)))
- return ((unsigned long *)task->thread.regs)[regno];
+ if (regno < (sizeof(struct pt_regs) / sizeof(unsigned long))) {
+ *data = ((unsigned long *)task->thread.regs)[regno];
+ return 0;
+ }
return -EIO;
}
@@ -1559,7 +1564,9 @@ long arch_ptrace(struct task_struct *child, long request,
CHECK_FULL_REGS(child->thread.regs);
if (index < PT_FPR0) {
- tmp = ptrace_get_reg(child, (int) index);
+ ret = ptrace_get_reg(child, (int) index, &tmp);
+ if (ret)
+ break;
} else {
unsigned int fpidx = index - PT_FPR0;
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index c0244e7..f51599e 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -95,7 +95,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
CHECK_FULL_REGS(child->thread.regs);
if (index < PT_FPR0) {
- tmp = ptrace_get_reg(child, index);
+ ret = ptrace_get_reg(child, index, &tmp);
+ if (ret)
+ break;
} else {
flush_fp_to_thread(child);
/*
@@ -148,7 +150,11 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
tmp = ((u64 *)child->thread.fpr)
[FPRINDEX_3264(numReg)];
} else { /* register within PT_REGS struct */
- tmp = ptrace_get_reg(child, numReg);
+ unsigned long tmp2;
+ ret = ptrace_get_reg(child, numReg, &tmp2);
+ if (ret)
+ break;
+ tmp = tmp2;
}
reg32bits = ((u32*)&tmp)[part];
ret = put_user(reg32bits, (u32 __user *)data);
@@ -232,7 +238,10 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
break;
CHECK_FULL_REGS(child->thread.regs);
if (numReg < PT_FPR0) {
- unsigned long freg = ptrace_get_reg(child, numReg);
+ unsigned long freg;
+ ret = ptrace_get_reg(child, numReg, &freg);
+ if (ret)
+ break;
if (index % 2)
freg = (freg & ~0xfffffffful) | (data & 0xfffffffful);
else
--
1.7.10.4
next prev parent reply other threads:[~2013-02-15 3:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-11 6:29 [PATCH] powerpc: added DSCR support to ptrace Alexey Kardashevskiy
2013-01-15 18:17 ` Benjamin Herrenschmidt
2013-02-15 3:44 ` Alexey Kardashevskiy [this message]
2013-04-10 5:00 ` [PATCH] powerpc: fixing ptrace_get_reg to return an error Michael Neuling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360899863-17181-1-git-send-email-aik@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=benh@kernel.crashing.org \
--cc=david@gibson.dropbear.id.au \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).