[PATCH]qonverge/usb: Add first usb controller node

[PATCH]qonverge/usb: Add first usb controller node

[Ramneek Mehresh]

Add first usb controller node for qonverge qoriq platforms like
B4860, etc

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
---
Applies on git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
(branch next)

 arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi | 41 +++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi
new file mode 100644
index 0000000..29dad72
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x210000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <44 0x2 0 0>;
+};
-- 
1.7.11.4

Re: [PATCH]qonverge/usb: Add first usb controller node

[Gala Kumar-B11780]

On Feb 28, 2013, at 2:46 AM, Ramneek Mehresh wrote:

> Add first usb controller node for qonverge qoriq platforms like
> B4860, etc
>=20
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> ---
> Applies on git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.gi=
t
> (branch next)
>=20
> arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi | 41 ++++++++++++++++++=
+++++
> 1 file changed, 41 insertions(+)
> create mode 100644 arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi

applied to next

- k=