linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Scott Wood <scottwood@freescale.com>
To: Stuart Yoder <stuart.yoder@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org, Stuart Yoder <stuart.yoder@freescale.com>
Subject: Re: [PATCH] powerpc/e6500: Add Power ISA properties for e6500 cores
Date: Tue, 5 Mar 2013 13:41:53 -0600	[thread overview]
Message-ID: <1362512513.25308.6@snotra> (raw)
In-Reply-To: <1362511495-6738-1-git-send-email-stuart.yoder@freescale.com> (from stuart.yoder@freescale.com on Tue Mar  5 13:24:55 2013)

On 03/05/2013 01:24:55 PM, Stuart Yoder wrote:
> From: Stuart Yoder <stuart.yoder@freescale.com>
>=20
> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
> ---
>  arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi |   66 =20
> ++++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
>=20
> diff --git a/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi =20
> b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
> new file mode 100644
> index 0000000..b763252
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
> @@ -0,0 +1,66 @@
> +/*
> + * e6500 Power ISA Device Tree Source (include)
> + *
> + * Copyright 2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following =20
> conditions are met:
> + *     * Redistributions of source code must retain the above =20
> copyright
> + *       notice, this list of conditions and the following =20
> disclaimer.
> + *     * Redistributions in binary form must reproduce the above =20
> copyright
> + *       notice, this list of conditions and the following =20
> disclaimer in the
> + *       documentation and/or other materials provided with the =20
> distribution.
> + *     * Neither the name of Freescale Semiconductor nor the
> + *       names of its contributors may be used to endorse or promote =20
> products
> + *       derived from this software without specific prior written =20
> permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms =20
> of the
> + * GNU General Public License ("GPL") as published by the Free =20
> Software
> + * Foundation, either version 2 of that License or (at your option) =20
> any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND =20
> ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =20
> IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR =20
> PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =20
> FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR =20
> CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS =20
> OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =20
> CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT =20
> LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =20
> USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/ {
> +	cpus {
> +		power-isa-version =3D "2.06";
> +		power-isa-b;		// Base
> +		power-isa-e;		// Embedded
> +		power-isa-atb;		// Alternate Time Base
> +		power-isa-cs;		// Cache Specification
> +		power-isa-ds;		// Decorated Storage
> +		power-isa-e.ed;		// Embedded.Enhanced Debug
> +		power-isa-e.pd;		// Embedded.External PID
> +		power-isa-e.hv;		// Embedded.Hypervisor
> +		power-isa-e.le;		// Embedded.Little-Endian
> +		power-isa-e.pm;		// Embedded.Performance Monitor
> +		power-isa-e.pc;		// Embedded.Processor Control
> +		power-isa-ecl;		// Embedded Cache Locking
> +		power-isa-exp;		// External Proxy
> +		power-isa-fp;		// Floating Point
> +		power-isa-fp.r;		// Floating Point.Record
> +		power-isa-mmc;		// Memory Coherence
> +		power-isa-scpm;		// Store Conditional Page =20
> Mobility
> +		power-isa-wt;		// Wait
> +		power-isa-64;		// 64-bit
> +		power-isa-e.pt;		// Embedded.Page Table
> +		power-isa-e.hv.lrat	// Embedded.Hypervisor.LRAT
> +		power-isa-e.em		// Embedded Multi-Threading
> +		power-isa-v		// Vector (AltiVec)
> +		power-isa-er		// Enhanced Reservations (Load =20
> and Reserve and Store Cond.)
> +		power-isa-deo		// Data Cache Extended =20
> Operations
> +		power-isa-cs		// Cache Stashing
> +		mmu-type =3D "power-embedded";

You've got some missing semicolons near the end...

-Scott=

      reply	other threads:[~2013-03-05 19:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-05 19:24 [PATCH] powerpc/e6500: Add Power ISA properties for e6500 cores Stuart Yoder
2013-03-05 19:41 ` Scott Wood [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1362512513.25308.6@snotra \
    --to=scottwood@freescale.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=stuart.yoder@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).