From: Sandeep Singh <Sandeep@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>, <linux-arm-kernel@lists.infradead.org>
Cc: Sandeep Singh <Sandeep@freescale.com>,
Poonam Aggrwal <poonam.aggrwal@freescale.com>
Subject: [PATCH 1/4] Device tree entry for Freescale TDM controller
Date: Thu, 7 Mar 2013 16:57:45 +0530 [thread overview]
Message-ID: <1362655668-26721-1-git-send-email-Sandeep@freescale.com> (raw)
Added dtsi file for Freescale TDM controller.
This controller is available on many Freescale SOCs like MPC8315, P1020, P1010,
P1022 and P1024
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
---
arch/powerpc/boot/dts/fsl/pq3-tdm1.0-0.dtsi | 42 +++++++++++++++++++++++++++
1 files changed, 42 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-tdm1.0-0.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/pq3-tdm1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-tdm1.0-0.dtsi
new file mode 100644
index 0000000..e89f637
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-tdm1.0-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 TDM device tree stub [ controller @ offset 0x16000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+tdm@16000 {
+ compatible = "fsl,tdm1.0";
+ reg = <0x16000 0x200 0x2c000 0x2000>;
+ clock-frequency = <0>;
+ tdm_tx_clk = <2048000>;
+ interrupts = <62 8 0 0>;
+ fsl,max-time-slots = <128>;
+};
--
1.7.6.GIT
next reply other threads:[~2013-03-07 11:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-07 11:27 Sandeep Singh [this message]
2013-03-07 11:27 ` [PATCH 2/4] Device Tree bindings for Freescale TDM controller Sandeep Singh
2013-03-07 11:27 ` [PATCH 3/4] TDM Device Tree entries for various Freescale Platforms Sandeep Singh
2013-03-08 16:47 ` Timur Tabi
2013-03-08 16:47 ` Timur Tabi
2013-03-11 9:27 ` Singh Sandeep-B37400
2013-03-07 11:27 ` [PATCH 4/4] Added device tree entries for Legerity SLIC node on " Sandeep Singh
2013-07-30 22:40 ` [4/4] " Scott Wood
2013-03-07 13:34 ` [PATCH 1/4] Device tree entry for Freescale TDM controller Russell King - ARM Linux
2013-03-13 5:17 ` Singh Sandeep-B37400
2013-03-20 10:51 ` Singh Sandeep-B37400
2013-03-29 9:34 ` Singh Sandeep-B37400
2013-06-28 22:15 ` [1/4] " Scott Wood
2013-07-01 4:59 ` Singh Sandeep-B37400
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362655668-26721-1-git-send-email-Sandeep@freescale.com \
--to=sandeep@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=poonam.aggrwal@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).