[PATCH] powerpc/fsl-booke: add the reg property for pci bridge device node for t4/b4xx boards

[Kevin Hao <haokexin@gmail.com>]

The reg property in the pci bridge device node is used to bind this
device node to the pci bridge device. Then all the pci devices under
this bridge could use the interrupt maps defined in this device node
to do the irq translation. So if this property is missed, the pci
traditional irq mechanism will not work.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
---
 arch/powerpc/boot/dts/fsl/b4si-post.dtsi    | 1 +
 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index c3e553a..7399154 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -53,6 +53,7 @@
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
+		reg = <0 0 0 0 0>;
 		interrupts = <20 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index e77e6ad..bd611a9 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -52,6 +52,7 @@
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
+		reg = <0 0 0 0 0>;
 		interrupts = <20 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
@@ -77,6 +78,7 @@
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
+		reg = <0 0 0 0 0>;
 		interrupts = <21 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
@@ -102,6 +104,7 @@
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
+		reg = <0 0 0 0 0>;
 		interrupts = <22 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
@@ -127,6 +130,7 @@
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
+		reg = <0 0 0 0 0>;
 		interrupts = <23 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
-- 
1.8.1.4