From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org,
David Gibson <dwg@au1.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH -V6 10/27] powerpc: Use encode avpn where we need only avpn values
Date: Mon, 22 Apr 2013 15:30:44 +0530 [thread overview]
Message-ID: <1366624861-24948-11-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1366624861-24948-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
In all these cases we are doing something similar to
HPTE_V_COMPARE(hpte_v, want_v) which ignores the HPTE_V_LARGE bit
With MPSS support we would need actual page size to set HPTE_V_LARGE
bit and that won't be available in most of these cases. Since we are ignoring
HPTE_V_LARGE bit, use the avpn value instead. There should not be any change
in behaviour after this patch.
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
arch/powerpc/mm/hash_native_64.c | 8 ++++----
arch/powerpc/platforms/cell/beat_htab.c | 10 +++++-----
arch/powerpc/platforms/ps3/htab.c | 2 +-
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index ffc1e00..9d8983a 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -252,7 +252,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
unsigned long hpte_v, want_v;
int ret = 0;
- want_v = hpte_encode_v(vpn, psize, ssize);
+ want_v = hpte_encode_avpn(vpn, psize, ssize);
DBG_LOW(" update(vpn=%016lx, avpnv=%016lx, group=%lx, newpp=%lx)",
vpn, want_v & HPTE_V_AVPN, slot, newpp);
@@ -288,7 +288,7 @@ static long native_hpte_find(unsigned long vpn, int psize, int ssize)
unsigned long want_v, hpte_v;
hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize);
- want_v = hpte_encode_v(vpn, psize, ssize);
+ want_v = hpte_encode_avpn(vpn, psize, ssize);
/* Bolted mappings are only ever in the primary group */
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
@@ -348,7 +348,7 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn,
DBG_LOW(" invalidate(vpn=%016lx, hash: %lx)\n", vpn, slot);
- want_v = hpte_encode_v(vpn, psize, ssize);
+ want_v = hpte_encode_avpn(vpn, psize, ssize);
native_lock_hpte(hptep);
hpte_v = hptep->v;
@@ -520,7 +520,7 @@ static void native_flush_hash_range(unsigned long number, int local)
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += hidx & _PTEIDX_GROUP_IX;
hptep = htab_address + slot;
- want_v = hpte_encode_v(vpn, psize, ssize);
+ want_v = hpte_encode_avpn(vpn, psize, ssize);
native_lock_hpte(hptep);
hpte_v = hptep->v;
if (!HPTE_V_COMPARE(hpte_v, want_v) ||
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
index 0f6f839..472f9a7 100644
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ b/arch/powerpc/platforms/cell/beat_htab.c
@@ -191,7 +191,7 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,
u64 dummy0, dummy1;
unsigned long want_v;
- want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
+ want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
DBG_LOW(" update: "
"avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
@@ -228,7 +228,7 @@ static long beat_lpar_hpte_find(unsigned long vpn, int psize)
unsigned long want_v, hpte_v;
hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, MMU_SEGSIZE_256M);
- want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
+ want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
for (j = 0; j < 2; j++) {
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
@@ -283,7 +283,7 @@ static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
DBG_LOW(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
slot, va, psize, local);
- want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
+ want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
raw_spin_lock_irqsave(&beat_htab_lock, flags);
dummy1 = beat_lpar_hpte_getword0(slot);
@@ -372,7 +372,7 @@ static long beat_lpar_hpte_updatepp_v3(unsigned long slot,
unsigned long want_v;
unsigned long pss;
- want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
+ want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc;
DBG_LOW(" update: "
@@ -402,7 +402,7 @@ static void beat_lpar_hpte_invalidate_v3(unsigned long slot, unsigned long vpn,
DBG_LOW(" inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n",
slot, vpn, psize, local);
- want_v = hpte_encode_v(vpn, psize, MMU_SEGSIZE_256M);
+ want_v = hpte_encode_avpn(vpn, psize, MMU_SEGSIZE_256M);
pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc;
lpar_rc = beat_invalidate_htab_entry3(0, slot, want_v, pss);
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 6cc5820..cd8f2fb 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -117,7 +117,7 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
unsigned long flags;
long ret;
- want_v = hpte_encode_v(vpn, psize, ssize);
+ want_v = hpte_encode_avpn(vpn, psize, ssize);
spin_lock_irqsave(&ps3_htab_lock, flags);
--
1.7.10
next prev parent reply other threads:[~2013-04-22 10:02 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-22 10:00 [PATCH -V6 00/27] THP support for PPC64 Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 01/27] powerpc: Use signed formatting when printing error Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 02/27] powerpc: Save DAR and DSISR in pt_regs on MCE Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 03/27] powerpc: Don't hard code the size of pte page Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 04/27] powerpc: Don't truncate pgd_index wrongly Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 05/27] powerpc: New hugepage directory format Aneesh Kumar K.V
2013-04-23 7:01 ` Paul Mackerras
2013-04-23 8:42 ` Aneesh Kumar K.V
2013-04-24 5:47 ` Paul Mackerras
2013-04-25 6:00 ` Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 06/27] powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 07/27] powerpc: Reduce the PTE_INDEX_SIZE Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 08/27] powerpc: Move the pte free routines from common header Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 09/27] powerpc: Reduce PTE table memory wastage Aneesh Kumar K.V
2013-04-22 10:00 ` Aneesh Kumar K.V [this message]
2013-04-22 10:00 ` [PATCH -V6 11/27] powerpc: Decode the pte-lp-encoding bits correctly Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 12/27] powerpc: Fix hpte_decode to use the correct decoding for page sizes Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 13/27] powerpc: print both base and actual page size on hash failure Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 14/27] powerpc: Print page size info during boot Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 15/27] powerpc: Update tlbie/tlbiel as per ISA doc Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 16/27] mm/THP: HPAGE_SHIFT is not a #define on some arch Aneesh Kumar K.V
2013-04-22 15:43 ` Andrea Arcangeli
2013-04-22 10:00 ` [PATCH -V6 17/27] mm/THP: Add pmd args to pgtable deposit and withdraw APIs Aneesh Kumar K.V
2013-04-22 15:46 ` Andrea Arcangeli
2013-04-22 10:00 ` [PATCH -V6 18/27] mm/THP: withdraw the pgtable after pmdp related operations Aneesh Kumar K.V
2013-04-22 15:49 ` Andrea Arcangeli
2013-04-24 9:08 ` Aneesh Kumar K.V
2013-04-24 15:14 ` Andrea Arcangeli
2013-04-25 6:11 ` Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 19/27] powerpc/THP: Double the PMD table size for THP Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 20/27] powerpc/THP: Implement transparent hugepages for ppc64 Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 21/27] powerpc: move find_linux_pte_or_hugepte and gup_hugepte to common code Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 22/27] powerpc: Update find_linux_pte_or_hugepte to handle transparent hugepages Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 23/27] powerpc: Replace find_linux_pte with find_linux_pte_or_hugepte Aneesh Kumar K.V
2013-04-24 6:29 ` Paul Mackerras
2013-04-22 10:00 ` [PATCH -V6 24/27] powerpc: Update gup_pmd_range to handle transparent hugepages Aneesh Kumar K.V
2013-04-22 10:00 ` [PATCH -V6 25/27] powerpc/THP: Add code to handle HPTE faults for large pages Aneesh Kumar K.V
2013-04-22 10:01 ` [PATCH -V6 26/27] powerpc/THP: Enable THP on PPC64 Aneesh Kumar K.V
2013-04-22 10:01 ` [PATCH -V6 27/27] powerpc: Optimize hugepage invalidate Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366624861-24948-11-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=dwg@au1.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).