From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mxout1.idt.com (mxout1.idt.com [157.165.5.25]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "mxout1.idt.com", Issuer "idt.com" (not verified)) by ozlabs.org (Postfix) with ESMTPS id CBF8A2C00C4 for ; Fri, 10 May 2013 00:23:02 +1000 (EST) From: Alexandre Bounine To: Andrew Morton , linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Subject: [PATCH] rapidio/switches: remove tsi500 driver Date: Thu, 9 May 2013 10:20:47 -0400 Message-Id: <1368109247-16914-1-git-send-email-alexandre.bounine@idt.com> Cc: Alexandre Bounine List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Remove the driver for Tsi500 Parallel RapidIO switch because this device is not available for several years. Since the first introduction of Tsi500, the parallel RapidIO interface was replaced by the serial RapidIO (sRIO) and therefore there is no value in keeping this driver. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala --- drivers/rapidio/switches/Kconfig | 7 --- drivers/rapidio/switches/Makefile | 1 - drivers/rapidio/switches/tsi500.c | 78 ------------------------------------- 3 files changed, 0 insertions(+), 86 deletions(-) delete mode 100644 drivers/rapidio/switches/tsi500.c diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig index f47fee5..62d4a06 100644 --- a/drivers/rapidio/switches/Kconfig +++ b/drivers/rapidio/switches/Kconfig @@ -26,10 +26,3 @@ config RAPIDIO_CPS_GEN2 default n ---help--- Includes support for ITD CPS Gen.2 serial RapidIO switches. - -config RAPIDIO_TSI500 - bool "Tsi500 Parallel RapidIO switch support" - depends on RAPIDIO - default n - ---help--- - Includes support for IDT Tsi500 parallel RapidIO switch. diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile index c4d3acc..051cc6b 100644 --- a/drivers/rapidio/switches/Makefile +++ b/drivers/rapidio/switches/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o -obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o diff --git a/drivers/rapidio/switches/tsi500.c b/drivers/rapidio/switches/tsi500.c deleted file mode 100644 index 914eddd..0000000 --- a/drivers/rapidio/switches/tsi500.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * RapidIO Tsi500 switch support - * - * Copyright 2009-2010 Integrated Device Technology, Inc. - * Alexandre Bounine - * - Modified switch operations initialization. - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include "../rio.h" - -static int -tsi500_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port) -{ - int i; - u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3); - u32 result; - - if (table == 0xff) { - rio_mport_read_config_32(mport, destid, hopcount, offset, &result); - result &= ~(0xf << (4*(route_destid & 0x7))); - for (i=0;i<4;i++) - rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*i), result | (route_port << (4*(route_destid & 0x7)))); - } - else { - rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result); - result &= ~(0xf << (4*(route_destid & 0x7))); - rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*table), result | (route_port << (4*(route_destid & 0x7)))); - } - - return 0; -} - -static int -tsi500_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 *route_port) -{ - int ret = 0; - u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3); - u32 result; - - if (table == 0xff) - rio_mport_read_config_32(mport, destid, hopcount, offset, &result); - else - rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result); - - result &= 0xf << (4*(route_destid & 0x7)); - *route_port = result >> (4*(route_destid & 0x7)); - if (*route_port > 3) - ret = -1; - - return ret; -} - -static int tsi500_switch_init(struct rio_dev *rdev, int do_enum) -{ - pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = tsi500_route_add_entry; - rdev->rswitch->get_entry = tsi500_route_get_entry; - rdev->rswitch->clr_table = NULL; - rdev->rswitch->set_domain = NULL; - rdev->rswitch->get_domain = NULL; - rdev->rswitch->em_init = NULL; - rdev->rswitch->em_handle = NULL; - - return 0; -} - -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_switch_init); -- 1.7.8.4