From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Bhushan Bharat-R65777 <R65777@freescale.com>
Cc: Xie Shaohui-B21989 <B21989@freescale.com>,
Liu Qiang-B32616 <B32616@freescale.com>,
Zang Roy-R61911 <r61911@freescale.com>,
"tiejun.chen" <tiejun.chen@windriver.com>,
Fleming Andy-AFLEMING <afleming@freescale.com>,
"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Subject: Re: SATA FSL and upstreaming
Date: Thu, 16 May 2013 16:52:13 +1000 [thread overview]
Message-ID: <1368687133.9603.51.camel@pasglop> (raw)
In-Reply-To: <6A3DF150A5B70D4F9B66A25E3F7C888D0701C498@039-SN2MPN1-012.039d.mgd.msft.net>
On Thu, 2013-05-16 at 06:48 +0000, Bhushan Bharat-R65777 wrote:
> 1) Load RCW as Tiejun on some address in DDR.
>
> 2) Brun RCW at 0xec000000:
> protect off 0xec000000 +$filesize; erase 0xec000000 +$filesize; cp.b 0x1000000 0xec000000 $filesize
Done.
> 3) run " pix altbak" command
>
> 4) check you are on bank4
It stays on bank 0
Also, before I flashed the rcw, I tried messing with SW7[1:4] and got it
to book to bank 4 once (I think I changed DIP 2 or 3). Now, after the
new RCW is in, it won't boot with any other setting than bank 0 however.
Cheers,
Ben.
> 5) If you are luckier then networking will work for you.
>
> Thanks
> -Bharat
>
> >
> > Tiejun
>
next prev parent reply other threads:[~2013-05-16 6:52 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-16 4:47 SATA FSL and upstreaming Benjamin Herrenschmidt
2013-05-16 5:45 ` Benjamin Herrenschmidt
2013-05-16 5:55 ` tiejun.chen
2013-05-16 6:06 ` Benjamin Herrenschmidt
2013-05-16 5:59 ` Zang Roy-R61911
2013-05-16 6:01 ` Bhushan Bharat-R65777
2013-05-16 6:05 ` Zang Roy-R61911
2013-05-16 6:09 ` Benjamin Herrenschmidt
2013-05-16 6:17 ` tiejun.chen
2013-05-16 6:20 ` Zang Roy-R61911
2013-05-16 6:25 ` tiejun.chen
2013-05-16 7:20 ` Zang Roy-R61911
2013-05-16 6:26 ` Benjamin Herrenschmidt
2013-05-16 6:21 ` Benjamin Herrenschmidt
2013-05-16 6:35 ` tiejun.chen
2013-05-16 6:37 ` Zang Roy-R61911
2013-05-16 6:40 ` Benjamin Herrenschmidt
2013-05-16 6:43 ` tiejun.chen
2013-05-16 6:48 ` Bhushan Bharat-R65777
2013-05-16 6:49 ` Zang Roy-R61911
2013-05-16 6:53 ` Benjamin Herrenschmidt
2013-05-16 6:56 ` tiejun.chen
2013-05-16 7:01 ` Zang Roy-R61911
2013-05-16 7:05 ` Benjamin Herrenschmidt
2013-05-16 7:13 ` Bhushan Bharat-R65777
2013-05-16 7:26 ` Benjamin Herrenschmidt
2013-05-16 7:20 ` Xie Shaohui-B21989
2013-05-16 7:25 ` Bhushan Bharat-R65777
2013-05-16 6:59 ` Benjamin Herrenschmidt
2013-05-16 7:17 ` Zang Roy-R61911
2013-05-16 6:52 ` Benjamin Herrenschmidt [this message]
2013-05-16 14:56 ` Timur Tabi
2013-06-07 3:52 ` Benjamin Herrenschmidt
2013-06-07 4:39 ` Benjamin Herrenschmidt
2013-06-07 4:45 ` Zang Roy-R61911
2013-06-07 4:47 ` Benjamin Herrenschmidt
2013-06-07 4:50 ` Zang Roy-R61911
2013-06-07 7:41 ` fsqrt Benjamin Herrenschmidt
2013-06-07 7:45 ` fsqrt Zang Roy-R61911
2013-06-07 8:53 ` fsqrt Benjamin Herrenschmidt
2013-06-07 8:59 ` fsqrt Benjamin Herrenschmidt
2013-06-07 10:48 ` fsqrt David Laight
2013-06-07 12:14 ` fsqrt Benjamin Herrenschmidt
2013-06-07 19:19 ` fsqrt Kumar Gala
2013-06-07 23:23 ` fsqrt Benjamin Herrenschmidt
2013-06-07 23:25 ` fsqrt Benjamin Herrenschmidt
2013-06-07 23:30 ` fsqrt Benjamin Herrenschmidt
2013-06-08 0:20 ` fsqrt Dan Malek
2013-06-08 0:34 ` fsqrt Benjamin Herrenschmidt
2013-06-08 1:13 ` fsqrt Dan Malek
2013-06-08 4:31 ` fsqrt Benjamin Herrenschmidt
2013-06-09 6:32 ` fsqrt Benjamin Herrenschmidt
2013-06-07 7:46 ` fsqrt tiejun.chen
2013-06-07 8:53 ` fsqrt Benjamin Herrenschmidt
2013-06-07 9:02 ` fsqrt tiejun.chen
2013-06-07 12:07 ` fsqrt Benjamin Herrenschmidt
2013-06-07 7:05 ` FSL 64-bit DMA window question Benjamin Herrenschmidt
2013-06-07 7:58 ` Zang Roy-R61911
2013-06-07 8:55 ` Benjamin Herrenschmidt
2013-06-07 9:44 ` Zang Roy-R61911
2013-06-07 12:09 ` Benjamin Herrenschmidt
[not found] ` <1370642488.6813.15@snotra>
2013-06-07 22:02 ` Scott Wood
2013-06-07 22:09 ` Benjamin Herrenschmidt
2013-06-07 22:34 ` Scott Wood
2013-06-07 22:39 ` Benjamin Herrenschmidt
2013-06-07 23:29 ` Scott Wood
2013-06-07 23:33 ` Benjamin Herrenschmidt
2013-06-07 12:09 ` SATA FSL and upstreaming Timur Tabi
2013-05-16 6:17 ` Zang Roy-R61911
2013-05-16 6:23 ` Benjamin Herrenschmidt
2013-05-16 6:33 ` Bhushan Bharat-R65777
2013-05-16 6:34 ` Benjamin Herrenschmidt
2013-05-16 6:35 ` Zang Roy-R61911
2013-05-16 6:37 ` Benjamin Herrenschmidt
2013-05-16 6:41 ` tiejun.chen
2013-05-16 6:48 ` Zang Roy-R61911
2013-05-16 6:24 ` Xie Shaohui-B21989
2013-05-16 6:31 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368687133.9603.51.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=B21989@freescale.com \
--cc=B32616@freescale.com \
--cc=R65777@freescale.com \
--cc=afleming@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=r61911@freescale.com \
--cc=tiejun.chen@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).