From: Gavin Shan <shangw@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Subject: [PATCH 12/27] powerpc/eeh: EEH backend for P7IOC
Date: Wed, 5 Jun 2013 15:34:13 +0800 [thread overview]
Message-ID: <1370417668-16832-13-git-send-email-shangw@linux.vnet.ibm.com> (raw)
In-Reply-To: <1370417668-16832-1-git-send-email-shangw@linux.vnet.ibm.com>
For EEH on PowerNV platform, the overall architecture is a bit
different from that on pSeries platform. In order to support multiple
I/O chips in future, we split EEH to 3 layers for PowerNV platform:
EEH core, platform layer, I/O layer. It would give EEH implementation
on PowerNV much more flexibility in future.
The patch adds the EEH backend for P7IOC.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/Makefile | 1 +
arch/powerpc/platforms/powernv/eeh-ioda.c | 53 +++++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/pci.h | 22 ++++++++++++
3 files changed, 76 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/powernv/eeh-ioda.c
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index bcc3cb4..09bd0cb 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -3,3 +3,4 @@ obj-y += opal-rtc.o opal-nvram.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
+obj-$(CONFIG_EEH) += eeh-ioda.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
new file mode 100644
index 0000000..b344576
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -0,0 +1,53 @@
+/*
+ * The file intends to implement the functions needed by EEH, which is
+ * built on IODA compliant chip. Actually, lots of functions related
+ * to EEH would be built based on the OPAL APIs.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/iommu.h>
+#include <asm/msi_bitmap.h>
+#include <asm/opal.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+#include <asm/tce.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+struct pnv_eeh_ops ioda_eeh_ops = {
+ .post_init = NULL,
+ .set_option = NULL,
+ .get_state = NULL,
+ .reset = NULL,
+ .get_log = NULL,
+ .configure_bridge = NULL
+};
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 25d76c4..1770188 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -66,15 +66,34 @@ struct pnv_ioda_pe {
struct list_head list;
};
+/* IOC dependent EEH operations */
+#ifdef CONFIG_EEH
+struct pnv_eeh_ops {
+ int (*post_init)(struct pci_controller *hose);
+ int (*set_option)(struct eeh_pe *pe, int option);
+ int (*get_state)(struct eeh_pe *pe, int *state);
+ int (*reset)(struct eeh_pe *pe, int option);
+ int (*get_log)(struct eeh_pe *pe, int severity,
+ char *drv_log, unsigned long len);
+ int (*configure_bridge)(struct eeh_pe *pe);
+};
+#endif /* CONFIG_EEH */
+
struct pnv_phb {
struct pci_controller *hose;
enum pnv_phb_type type;
enum pnv_phb_model model;
+ u64 hub_id;
u64 opal_id;
void __iomem *regs;
int initialized;
spinlock_t lock;
+#ifdef CONFIG_EEH
+ struct pnv_eeh_ops *eeh_ops;
+ int eeh_enabled;
+#endif
+
#ifdef CONFIG_PCI_MSI
unsigned int msi_base;
unsigned int msi32_support;
@@ -150,6 +169,9 @@ struct pnv_phb {
};
extern struct pci_ops pnv_pci_ops;
+#ifdef CONFIG_EEH
+extern struct pnv_eeh_ops ioda_eeh_ops;
+#endif
extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
void *tce_mem, u64 tce_size,
--
1.7.5.4
next prev parent reply other threads:[~2013-06-05 7:34 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 7:34 [PATCH v3 00/27] EEH Support for PowerNV platform Gavin Shan
2013-06-05 7:34 ` [PATCH 01/27] powerpc/eeh: Fix fetching bus for single-dev-PE Gavin Shan
2013-06-05 7:34 ` [PATCH 02/27] powerpc/eeh: Enhance converting EEH dev Gavin Shan
2013-06-05 7:34 ` [PATCH 03/27] powerpc/eeh: Make eeh_phb_pe_get() public Gavin Shan
2013-06-05 7:34 ` [PATCH 04/27] powerpc/eeh: Make eeh_pe_get() public Gavin Shan
2013-06-05 7:34 ` [PATCH 05/27] powerpc/eeh: Trace PCI bus from PE Gavin Shan
2013-06-05 7:34 ` [PATCH 06/27] powerpc/eeh: Make eeh_init() public Gavin Shan
2013-06-05 7:34 ` [PATCH 07/27] powerpc/eeh: EEH post initialization operation Gavin Shan
2013-06-05 7:34 ` [PATCH 08/27] powerpc/eeh: Refactor eeh_reset_pe_once() Gavin Shan
2013-06-05 7:34 ` [PATCH 09/27] powerpc/eeh: Delay EEH probe during hotplug Gavin Shan
2013-06-05 7:34 ` [PATCH 10/27] powerpc/eeh: Differentiate EEH events Gavin Shan
2013-06-05 7:34 ` [PATCH 11/27] powerpc/eeh: Sync OPAL API with firmware Gavin Shan
2013-06-05 7:34 ` Gavin Shan [this message]
2013-06-05 7:34 ` [PATCH 13/27] powerpc/eeh: I/O chip post initialization Gavin Shan
2013-06-05 7:34 ` [PATCH 14/27] powerpc/eeh: I/O chip EEH enable option Gavin Shan
2013-06-05 7:34 ` [PATCH 15/27] powerpc/eeh: I/O chip EEH state retrieval Gavin Shan
2013-06-11 7:37 ` Benjamin Herrenschmidt
2013-06-12 3:32 ` Gavin Shan
2013-06-12 4:19 ` Benjamin Herrenschmidt
2013-06-13 4:26 ` Gavin Shan
2013-06-13 4:42 ` Benjamin Herrenschmidt
2013-06-13 5:50 ` Gavin Shan
2013-06-05 7:34 ` [PATCH 16/27] powerpc/eeh: I/O chip PE reset Gavin Shan
2013-06-05 7:34 ` [PATCH 17/27] powerpc/eeh: I/O chip PE log and bridge setup Gavin Shan
2013-06-11 7:37 ` Benjamin Herrenschmidt
2013-06-12 3:33 ` Gavin Shan
2013-06-05 7:34 ` [PATCH 18/27] powerpc/eeh: PowerNV EEH backends Gavin Shan
2013-06-05 7:34 ` [PATCH 19/27] powerpc/eeh: Initialization for PowerNV Gavin Shan
2013-06-05 7:34 ` [PATCH 20/27] powerpc/eeh: Enable EEH check for config access Gavin Shan
2013-06-05 7:34 ` [PATCH 21/27] powerpc/eeh: Process interrupts caused by EEH Gavin Shan
2013-06-11 8:13 ` Benjamin Herrenschmidt
2013-06-13 4:14 ` Gavin Shan
2013-06-05 7:34 ` [PATCH 22/27] powerpc/eeh: Allow to check fenced PHB proactively Gavin Shan
2013-06-05 7:34 ` [PATCH 23/27] powernv/opal: Notifier for OPAL events Gavin Shan
2013-06-12 0:32 ` Benjamin Herrenschmidt
2013-06-12 3:15 ` Gavin Shan
2013-06-05 7:34 ` [PATCH 24/27] powernv/opal: Disable OPAL notifier upon poweroff Gavin Shan
2013-06-05 7:34 ` [PATCH 25/27] powerpc/eeh: Register OPAL notifier for PCI error Gavin Shan
2013-06-05 7:34 ` [PATCH 26/27] powerpc/powernv: Debugfs directory for PHB Gavin Shan
2013-06-05 7:34 ` [PATCH 27/27] powerpc/eeh: Debugfs for error injection Gavin Shan
2013-06-11 7:46 ` [PATCH v3 00/27] EEH Support for PowerNV platform Benjamin Herrenschmidt
2013-06-12 3:18 ` Gavin Shan
-- strict thread matches above, loose matches on Subject: below --
2013-06-15 9:02 [PATCH v4 " Gavin Shan
2013-06-15 9:03 ` [PATCH 12/27] powerpc/eeh: EEH backend for P7IOC Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370417668-16832-13-git-send-email-shangw@linux.vnet.ibm.com \
--to=shangw@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).