linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Michael Ellerman <michael@ellerman.id.au>
To: <linuxppc-dev@ozlabs.org>
Cc: Anton Blanchard <anton@samba.org>, rostedt@goodmis.org
Subject: [PATCH] powerpc: Fix stack overflow crash in resume_kernel when ftracing
Date: Thu, 13 Jun 2013 21:04:56 +1000	[thread overview]
Message-ID: <1371121496-16095-1-git-send-email-michael@ellerman.id.au> (raw)

It's possible for us to crash when running with ftrace enabled, eg:

  Bad kernel stack pointer bffffd12 at c00000000000a454
  cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40]
      pc: c00000000000a454: resume_kernel+0x34/0x60
      lr: c00000000000335c: performance_monitor_common+0x15c/0x180
      sp: bffffd12
     msr: 8000000000001032
     dar: bffffd12
   dsisr: 42000000

If we look at current's stack (paca->__current->stack) we see it is
equal to c0000002ecab0000. Our stack is 16K, and comparing to
paca->kstack (c0000002ecab3e30) we can see that we have overflowed our
kernel stack. This leads to us writing over our struct thread_info, and
in this case we have corrupted thread_info->flags and set
_TIF_EMULATE_STACK_STORE.

Dumping the stack we see:

  3:mon> t c0000002ecab0000
  [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70
  [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180
  --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30
  [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable)
  [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90
  [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34
  [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300
  [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0
  [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable)
  [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280
  [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40
  [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0

  ... and so on

__ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry
path. At that point the irq state is not consistent, ie. interrupts are
hard disabled (by the exception entry), but the paca soft-enabled flag
may be out of sync.

This leads to the local_irq_restore() in trace_graph_entry() actually
enabling interrupts, which we do not want. Because we have not yet
reprogrammed the decrementer we immediately take another decrementer
exception, and recurse.

The fix is twofold. Firstly make sure we call DISABLE_INTS before
calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles
the irq state in the paca with the hardware, making it safe again to
call local_irq_save/restore().

Although that should be sufficient to fix the bug, we also mark the
runlatch routines as notrace. They are called very early in the
exception entry and we are asking for trouble tracing them. They are
also fairly uninteresting and tracing them just adds unnecessary
overhead.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
 arch/powerpc/include/asm/exception-64s.h |    2 +-
 arch/powerpc/kernel/process.c            |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 8e5fae8..46793b5 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -513,7 +513,7 @@ label##_common:							\
  */
 #define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr)		  \
 	EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \
-			 FINISH_NAP;RUNLATCH_ON;DISABLE_INTS)
+			 FINISH_NAP;DISABLE_INTS;RUNLATCH_ON)
 
 /*
  * When the idle code in power4_idle puts the CPU into NAP mode,
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index b0f3e3f..076d124 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1369,7 +1369,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 
 #ifdef CONFIG_PPC64
 /* Called with hard IRQs off */
-void __ppc64_runlatch_on(void)
+void notrace __ppc64_runlatch_on(void)
 {
 	struct thread_info *ti = current_thread_info();
 	unsigned long ctrl;
@@ -1382,7 +1382,7 @@ void __ppc64_runlatch_on(void)
 }
 
 /* Called with hard IRQs off */
-void __ppc64_runlatch_off(void)
+void notrace __ppc64_runlatch_off(void)
 {
 	struct thread_info *ti = current_thread_info();
 	unsigned long ctrl;
-- 
1.7.10.4

             reply	other threads:[~2013-06-13 11:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-13 11:04 Michael Ellerman [this message]
2013-06-13 12:45 ` [PATCH] powerpc: Fix stack overflow crash in resume_kernel when ftracing Steven Rostedt
2013-06-13 14:31   ` Michael Ellerman
2013-06-13 14:46     ` Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371121496-16095-1-git-send-email-michael@ellerman.id.au \
    --to=michael@ellerman.id.au \
    --cc=anton@samba.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).