* [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
2013-06-20 7:53 [v2][PATCH 0/7] powerpc/book3e: support kexec and kdump Tiejun Chen
@ 2013-06-20 7:53 ` Tiejun Chen
2013-07-02 5:00 ` Bhushan Bharat-R65777
2013-07-03 11:52 ` Sethi Varun-B16395
2013-06-20 7:53 ` [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel Tiejun Chen
` (5 subsequent siblings)
6 siblings, 2 replies; 16+ messages in thread
From: Tiejun Chen @ 2013-06-20 7:53 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, linux-kernel
book3e is different with book3s since 3s includes the exception
vectors code in head_64.S as it relies on absolute addressing
which is only possible within this compilation unit. So we have
to get that label address with got.
And when boot a relocated kernel, we should reset ipvr properly again
after .relocate.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/include/asm/exception-64e.h | 8 ++++++++
arch/powerpc/kernel/exceptions-64e.S | 15 ++++++++++++++-
arch/powerpc/kernel/head_64.S | 22 ++++++++++++++++++++++
arch/powerpc/lib/feature-fixups.c | 7 +++++++
4 files changed, 51 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index 51fa43e..89e940d 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -214,10 +214,18 @@ exc_##label##_book3e:
#define TLB_MISS_STATS_SAVE_INFO_BOLTED
#endif
+#ifndef CONFIG_RELOCATABLE
#define SET_IVOR(vector_number, vector_offset) \
li r3,vector_offset@l; \
ori r3,r3,interrupt_base_book3e@l; \
mtspr SPRN_IVOR##vector_number,r3;
+#else
+#define SET_IVOR(vector_number, vector_offset) \
+ LOAD_REG_ADDR(r3,interrupt_base_book3e);\
+ rlwinm r3,r3,0,15,0; \
+ ori r3,r3,vector_offset@l; \
+ mtspr SPRN_IVOR##vector_number,r3;
+#endif
#endif /* _ASM_POWERPC_EXCEPTION_64E_H */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 645170a..4b23119 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1097,7 +1097,15 @@ skpinv: addi r6,r6,1 /* Increment */
* r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
*/
/* Now we branch the new virtual address mapped by this entry */
+#ifdef CONFIG_RELOCATABLE
+ /* We have to find out address from lr. */
+ bl 1f /* Find our address */
+1: mflr r6
+ addi r6,r6,(2f - 1b)
+ tovirt(r6,r6)
+#else
LOAD_REG_IMMEDIATE(r6,2f)
+#endif
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
mtspr SPRN_SRR0,r6
@@ -1348,9 +1356,14 @@ _GLOBAL(book3e_secondary_thread_init)
mflr r28
b 3b
-_STATIC(init_core_book3e)
+_GLOBAL(init_core_book3e)
/* Establish the interrupt vector base */
+#ifdef CONFIG_RELOCATABLE
+ tovirt(r2,r2)
+ LOAD_REG_ADDR(r3, interrupt_base_book3e)
+#else
LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+#endif
mtspr SPRN_IVPR,r3
sync
blr
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b61363d..0942f3a 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -414,12 +414,22 @@ _STATIC(__after_prom_start)
/* process relocations for the final address of the kernel */
lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
sldi r25,r25,32
+#if defined(CONFIG_PPC_BOOK3E)
+ tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
+#endif
lwz r7,__run_at_load-_stext(r26)
+#if defined(CONFIG_PPC_BOOK3E)
+ tophys(r26,r26) /* Restore for the remains. */
+#endif
cmplwi cr0,r7,1 /* flagged to stay where we are ? */
bne 1f
add r25,r25,r26
1: mr r3,r25
bl .relocate
+#if defined(CONFIG_PPC_BOOK3E)
+ /* We should set ivpr again after .relocate. */
+ bl .init_core_book3e
+#endif
#endif
/*
@@ -447,12 +457,24 @@ _STATIC(__after_prom_start)
* variable __run_at_load, if it is set the kernel is treated as relocatable
* kernel, otherwise it will be moved to PHYSICAL_START
*/
+#if defined(CONFIG_PPC_BOOK3E)
+ tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
+#endif
lwz r7,__run_at_load-_stext(r26)
+#if defined(CONFIG_PPC_BOOK3E)
+ tophys(r26,r26) /* Restore for the remains. */
+#endif
cmplwi cr0,r7,1
bne 3f
+#ifdef CONFIG_PPC_BOOK3E
+ LOAD_REG_ADDR(r5, interrupt_end_book3e)
+ LOAD_REG_ADDR(r11, _stext)
+ sub r5,r5,r11
+#else
/* just copy interrupts */
LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
+#endif
b 5f
3:
#endif
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 7a8a748..13f20ed 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -135,13 +135,20 @@ void do_final_fixups(void)
#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
int *src, *dest;
unsigned long length;
+#ifdef CONFIG_PPC_BOOK3E
+ extern char interrupt_end_book3e[];
+#endif
if (PHYSICAL_START == 0)
return;
src = (int *)(KERNELBASE + PHYSICAL_START);
dest = (int *)KERNELBASE;
+#ifdef CONFIG_PPC_BOOK3E
+ length = (interrupt_end_book3e - _stext) / sizeof(int);
+#else
length = (__end_interrupts - _stext) / sizeof(int);
+#endif
while (length--) {
patch_instruction(dest, *src);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 16+ messages in thread* RE: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
2013-06-20 7:53 ` [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE Tiejun Chen
@ 2013-07-02 5:00 ` Bhushan Bharat-R65777
2013-07-09 7:49 ` tiejun.chen
2013-07-03 11:52 ` Sethi Varun-B16395
1 sibling, 1 reply; 16+ messages in thread
From: Bhushan Bharat-R65777 @ 2013-07-02 5:00 UTC (permalink / raw)
To: Tiejun Chen, benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-
> bounces+bharat.bhushan=3Dfreescale.com@lists.ozlabs.org] On Behalf Of Tie=
jun Chen
> Sent: Thursday, June 20, 2013 1:23 PM
> To: benh@kernel.crashing.org
> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
> Subject: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
>=20
> book3e is different with book3s since 3s includes the exception
> vectors code in head_64.S as it relies on absolute addressing
> which is only possible within this compilation unit. So we have
> to get that label address with got.
>=20
> And when boot a relocated kernel, we should reset ipvr properly again
> after .relocate.
>=20
> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
> ---
> arch/powerpc/include/asm/exception-64e.h | 8 ++++++++
> arch/powerpc/kernel/exceptions-64e.S | 15 ++++++++++++++-
> arch/powerpc/kernel/head_64.S | 22 ++++++++++++++++++++++
> arch/powerpc/lib/feature-fixups.c | 7 +++++++
> 4 files changed, 51 insertions(+), 1 deletion(-)
>=20
> diff --git a/arch/powerpc/include/asm/exception-64e.h
> b/arch/powerpc/include/asm/exception-64e.h
> index 51fa43e..89e940d 100644
> --- a/arch/powerpc/include/asm/exception-64e.h
> +++ b/arch/powerpc/include/asm/exception-64e.h
> @@ -214,10 +214,18 @@ exc_##label##_book3e:
> #define TLB_MISS_STATS_SAVE_INFO_BOLTED
> #endif
>=20
> +#ifndef CONFIG_RELOCATABLE
> #define SET_IVOR(vector_number, vector_offset) \
> li r3,vector_offset@l; \
> ori r3,r3,interrupt_base_book3e@l; \
> mtspr SPRN_IVOR##vector_number,r3;
> +#else
> +#define SET_IVOR(vector_number, vector_offset) \
> + LOAD_REG_ADDR(r3,interrupt_base_book3e);\
> + rlwinm r3,r3,0,15,0; \
> + ori r3,r3,vector_offset@l; \
> + mtspr SPRN_IVOR##vector_number,r3;
> +#endif
>=20
> #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
>=20
> diff --git a/arch/powerpc/kernel/exceptions-64e.S
> b/arch/powerpc/kernel/exceptions-64e.S
> index 645170a..4b23119 100644
> --- a/arch/powerpc/kernel/exceptions-64e.S
> +++ b/arch/powerpc/kernel/exceptions-64e.S
> @@ -1097,7 +1097,15 @@ skpinv: addi r6,r6,1 /*
> Increment */
> * r4 =3D MAS0 w/TLBSEL & ESEL for the temp mapping
> */
> /* Now we branch the new virtual address mapped by this entry */
> +#ifdef CONFIG_RELOCATABLE
> + /* We have to find out address from lr. */
> + bl 1f /* Find our address */
> +1: mflr r6
> + addi r6,r6,(2f - 1b)
> + tovirt(r6,r6)
> +#else
> LOAD_REG_IMMEDIATE(r6,2f)
> +#endif
> lis r7,MSR_KERNEL@h
> ori r7,r7,MSR_KERNEL@l
> mtspr SPRN_SRR0,r6
> @@ -1348,9 +1356,14 @@ _GLOBAL(book3e_secondary_thread_init)
> mflr r28
> b 3b
>=20
> -_STATIC(init_core_book3e)
> +_GLOBAL(init_core_book3e)
> /* Establish the interrupt vector base */
> +#ifdef CONFIG_RELOCATABLE
> + tovirt(r2,r2)
> + LOAD_REG_ADDR(r3, interrupt_base_book3e)
> +#else
> LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
> +#endif
> mtspr SPRN_IVPR,r3
> sync
> blr
> diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.=
S
> index b61363d..0942f3a 100644
> --- a/arch/powerpc/kernel/head_64.S
> +++ b/arch/powerpc/kernel/head_64.S
> @@ -414,12 +414,22 @@ _STATIC(__after_prom_start)
> /* process relocations for the final address of the kernel */
> lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
> sldi r25,r25,32
> +#if defined(CONFIG_PPC_BOOK3E)
> + tovirt(r26,r26) /* on booke, we already run at
> PAGE_OFFSET */
> +#endif
> lwz r7,__run_at_load-_stext(r26)
> +#if defined(CONFIG_PPC_BOOK3E)
> + tophys(r26,r26) /* Restore for the remains. */
> +#endif
> cmplwi cr0,r7,1 /* flagged to stay where we are ? */
> bne 1f
> add r25,r25,r26
> 1: mr r3,r25
> bl .relocate
> +#if defined(CONFIG_PPC_BOOK3E)
> + /* We should set ivpr again after .relocate. */
> + bl .init_core_book3e
> +#endif
> #endif
>=20
> /*
> @@ -447,12 +457,24 @@ _STATIC(__after_prom_start)
> * variable __run_at_load, if it is set the kernel is treated as relocat=
able
> * kernel, otherwise it will be moved to PHYSICAL_START
> */
> +#if defined(CONFIG_PPC_BOOK3E)
> + tovirt(r26,r26) /* on booke, we already run at
> PAGE_OFFSET */
> +#endif
> lwz r7,__run_at_load-_stext(r26)
> +#if defined(CONFIG_PPC_BOOK3E)
> + tophys(r26,r26) /* Restore for the remains. */
> +#endif
> cmplwi cr0,r7,1
> bne 3f
>=20
> +#ifdef CONFIG_PPC_BOOK3E
> + LOAD_REG_ADDR(r5, interrupt_end_book3e)
> + LOAD_REG_ADDR(r11, _stext)
> + sub r5,r5,r11
> +#else
> /* just copy interrupts */
> LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
> +#endif
> b 5f
> 3:
> #endif
> diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature=
-
> fixups.c
> index 7a8a748..13f20ed 100644
> --- a/arch/powerpc/lib/feature-fixups.c
> +++ b/arch/powerpc/lib/feature-fixups.c
> @@ -135,13 +135,20 @@ void do_final_fixups(void)
> #if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
> int *src, *dest;
> unsigned long length;
> +#ifdef CONFIG_PPC_BOOK3E
> + extern char interrupt_end_book3e[];
> +#endif
Cannot we do this in arch/powerpc/kernel/asm/sections.h
>=20
> if (PHYSICAL_START =3D=3D 0)
> return;
>=20
> src =3D (int *)(KERNELBASE + PHYSICAL_START);
> dest =3D (int *)KERNELBASE;
> +#ifdef CONFIG_PPC_BOOK3E
> + length =3D (interrupt_end_book3e - _stext) / sizeof(int);
> +#else
> length =3D (__end_interrupts - _stext) / sizeof(int);
> +#endif
can we keep same name in books and booke; __end_interrupts ? this way we ca=
n avoid such #ifdefs
-Bharat
>=20
> while (length--) {
> patch_instruction(dest, *src);
> --
> 1.7.9.5
>=20
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
2013-07-02 5:00 ` Bhushan Bharat-R65777
@ 2013-07-09 7:49 ` tiejun.chen
0 siblings, 0 replies; 16+ messages in thread
From: tiejun.chen @ 2013-07-09 7:49 UTC (permalink / raw)
To: Bhushan Bharat-R65777
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
On 07/02/2013 01:00 PM, Bhushan Bharat-R65777 wrote:
>
>
>> -----Original Message-----
>> From: Linuxppc-dev [mailto:linuxppc-dev-
>> bounces+bharat.bhushan=freescale.com@lists.ozlabs.org] On Behalf Of Tiejun Chen
>> Sent: Thursday, June 20, 2013 1:23 PM
>> To: benh@kernel.crashing.org
>> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
>> Subject: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
>>
>> book3e is different with book3s since 3s includes the exception
>> vectors code in head_64.S as it relies on absolute addressing
>> which is only possible within this compilation unit. So we have
>> to get that label address with got.
>>
>> And when boot a relocated kernel, we should reset ipvr properly again
>> after .relocate.
>>
>> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
>> ---
[snip]
>> int *src, *dest;
>> unsigned long length;
>> +#ifdef CONFIG_PPC_BOOK3E
>> + extern char interrupt_end_book3e[];
>> +#endif
>
> Cannot we do this in arch/powerpc/kernel/asm/sections.h
>
>>
>> if (PHYSICAL_START == 0)
>> return;
>>
>> src = (int *)(KERNELBASE + PHYSICAL_START);
>> dest = (int *)KERNELBASE;
>> +#ifdef CONFIG_PPC_BOOK3E
>> + length = (interrupt_end_book3e - _stext) / sizeof(int);
>> +#else
>> length = (__end_interrupts - _stext) / sizeof(int);
>> +#endif
>
> can we keep same name in books and booke; __end_interrupts ? this way we can avoid such #ifdefs
Yes, I think I can simplify this as you pointed :)
Thanks,
Tiejun
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
2013-06-20 7:53 ` [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE Tiejun Chen
2013-07-02 5:00 ` Bhushan Bharat-R65777
@ 2013-07-03 11:52 ` Sethi Varun-B16395
2013-07-09 7:55 ` tiejun.chen
1 sibling, 1 reply; 16+ messages in thread
From: Sethi Varun-B16395 @ 2013-07-03 11:52 UTC (permalink / raw)
To: Tiejun Chen, benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-
> bounces+varun.sethi=3Dfreescale.com@lists.ozlabs.org] On Behalf Of Tiejun
> Chen
> Sent: Thursday, June 20, 2013 1:23 PM
> To: benh@kernel.crashing.org
> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
> Subject: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
>=20
> book3e is different with book3s since 3s includes the exception vectors
> code in head_64.S as it relies on absolute addressing which is only
> possible within this compilation unit. So we have to get that label
> address with got.
>=20
> And when boot a relocated kernel, we should reset ipvr properly again
> after .relocate.
>=20
> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
> ---
> arch/powerpc/include/asm/exception-64e.h | 8 ++++++++
> arch/powerpc/kernel/exceptions-64e.S | 15 ++++++++++++++-
> arch/powerpc/kernel/head_64.S | 22 ++++++++++++++++++++++
> arch/powerpc/lib/feature-fixups.c | 7 +++++++
> 4 files changed, 51 insertions(+), 1 deletion(-)
>=20
> diff --git a/arch/powerpc/include/asm/exception-64e.h
> b/arch/powerpc/include/asm/exception-64e.h
> index 51fa43e..89e940d 100644
> --- a/arch/powerpc/include/asm/exception-64e.h
> +++ b/arch/powerpc/include/asm/exception-64e.h
> @@ -214,10 +214,18 @@ exc_##label##_book3e:
> #define TLB_MISS_STATS_SAVE_INFO_BOLTED #endif
>=20
> +#ifndef CONFIG_RELOCATABLE
> #define SET_IVOR(vector_number, vector_offset) \
> li r3,vector_offset@l; \
> ori r3,r3,interrupt_base_book3e@l; \
> mtspr SPRN_IVOR##vector_number,r3;
> +#else
> +#define SET_IVOR(vector_number, vector_offset) \
> + LOAD_REG_ADDR(r3,interrupt_base_book3e);\
> + rlwinm r3,r3,0,15,0; \
> + ori r3,r3,vector_offset@l; \
> + mtspr SPRN_IVOR##vector_number,r3;
> +#endif
>=20
[Sethi Varun-B16395] Please add a documentation note here.
> #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
>=20
> diff --git a/arch/powerpc/kernel/exceptions-64e.S
> b/arch/powerpc/kernel/exceptions-64e.S
> index 645170a..4b23119 100644
> --- a/arch/powerpc/kernel/exceptions-64e.S
> +++ b/arch/powerpc/kernel/exceptions-64e.S
> @@ -1097,7 +1097,15 @@ skpinv: addi r6,r6,1
> /* Increment */
> * r4 =3D MAS0 w/TLBSEL & ESEL for the temp mapping
> */
> /* Now we branch the new virtual address mapped by this entry */
> +#ifdef CONFIG_RELOCATABLE
> + /* We have to find out address from lr. */
> + bl 1f /* Find our address */
> +1: mflr r6
> + addi r6,r6,(2f - 1b)
> + tovirt(r6,r6)
> +#else
> LOAD_REG_IMMEDIATE(r6,2f)
> +#endif
> lis r7,MSR_KERNEL@h
> ori r7,r7,MSR_KERNEL@l
> mtspr SPRN_SRR0,r6
> @@ -1348,9 +1356,14 @@ _GLOBAL(book3e_secondary_thread_init)
> mflr r28
> b 3b
>=20
> -_STATIC(init_core_book3e)
> +_GLOBAL(init_core_book3e)
> /* Establish the interrupt vector base */
> +#ifdef CONFIG_RELOCATABLE
> + tovirt(r2,r2)
> + LOAD_REG_ADDR(r3, interrupt_base_book3e) #else
> LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
> +#endif
> mtspr SPRN_IVPR,r3
> sync
> blr
[Sethi Varun-B16395] Please add a documentation note here as well.=20
> diff --git a/arch/powerpc/kernel/head_64.S
> b/arch/powerpc/kernel/head_64.S index b61363d..0942f3a 100644
> --- a/arch/powerpc/kernel/head_64.S
> +++ b/arch/powerpc/kernel/head_64.S
> @@ -414,12 +414,22 @@ _STATIC(__after_prom_start)
> /* process relocations for the final address of the kernel */
> lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
> sldi r25,r25,32
> +#if defined(CONFIG_PPC_BOOK3E)
> + tovirt(r26,r26) /* on booke, we already run at
> PAGE_OFFSET */
> +#endif
> lwz r7,__run_at_load-_stext(r26)
> +#if defined(CONFIG_PPC_BOOK3E)
> + tophys(r26,r26) /* Restore for the remains. */
> +#endif
> cmplwi cr0,r7,1 /* flagged to stay where we are ? */
> bne 1f
> add r25,r25,r26
> 1: mr r3,r25
> bl .relocate
> +#if defined(CONFIG_PPC_BOOK3E)
> + /* We should set ivpr again after .relocate. */
> + bl .init_core_book3e
> +#endif
> #endif
>=20
[Sethi Varun-B16395] A more detailed note over here would be useful.
> /*
> @@ -447,12 +457,24 @@ _STATIC(__after_prom_start)
> * variable __run_at_load, if it is set the kernel is treated as
> relocatable
> * kernel, otherwise it will be moved to PHYSICAL_START
> */
> +#if defined(CONFIG_PPC_BOOK3E)
> + tovirt(r26,r26) /* on booke, we already run at
> PAGE_OFFSET */
> +#endif
> lwz r7,__run_at_load-_stext(r26)
> +#if defined(CONFIG_PPC_BOOK3E)
> + tophys(r26,r26) /* Restore for the remains. */
> +#endif
> cmplwi cr0,r7,1
> bne 3f
>=20
> +#ifdef CONFIG_PPC_BOOK3E
> + LOAD_REG_ADDR(r5, interrupt_end_book3e)
> + LOAD_REG_ADDR(r11, _stext)
> + sub r5,r5,r11
> +#else
> /* just copy interrupts */
> LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
> +#endif
> b 5f
> 3:
> #endif
> diff --git a/arch/powerpc/lib/feature-fixups.c
> b/arch/powerpc/lib/feature-fixups.c
> index 7a8a748..13f20ed 100644
> --- a/arch/powerpc/lib/feature-fixups.c
> +++ b/arch/powerpc/lib/feature-fixups.c
> @@ -135,13 +135,20 @@ void do_final_fixups(void) #if
> defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
> int *src, *dest;
> unsigned long length;
> +#ifdef CONFIG_PPC_BOOK3E
> + extern char interrupt_end_book3e[];
> +#endif
[Sethi Varun-B16395] You can simply move this to sections.h and remove the =
ifdefs.
>=20
> if (PHYSICAL_START =3D=3D 0)
> return;
>=20
> src =3D (int *)(KERNELBASE + PHYSICAL_START);
> dest =3D (int *)KERNELBASE;
> +#ifdef CONFIG_PPC_BOOK3E
> + length =3D (interrupt_end_book3e - _stext) / sizeof(int); #else
> length =3D (__end_interrupts - _stext) / sizeof(int);
> +#endif
>=20
> while (length--) {
> patch_instruction(dest, *src);
-Varun
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
2013-07-03 11:52 ` Sethi Varun-B16395
@ 2013-07-09 7:55 ` tiejun.chen
0 siblings, 0 replies; 16+ messages in thread
From: tiejun.chen @ 2013-07-09 7:55 UTC (permalink / raw)
To: Sethi Varun-B16395
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
On 07/03/2013 07:52 PM, Sethi Varun-B16395 wrote:
>
>
>> -----Original Message-----
>> From: Linuxppc-dev [mailto:linuxppc-dev-
>> bounces+varun.sethi=freescale.com@lists.ozlabs.org] On Behalf Of Tiejun
>> Chen
>> Sent: Thursday, June 20, 2013 1:23 PM
>> To: benh@kernel.crashing.org
>> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
>> Subject: [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE
>>
>> book3e is different with book3s since 3s includes the exception vectors
>> code in head_64.S as it relies on absolute addressing which is only
>> possible within this compilation unit. So we have to get that label
>> address with got.
>>
>> And when boot a relocated kernel, we should reset ipvr properly again
>> after .relocate.
>>
>> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
>> ---
>> arch/powerpc/include/asm/exception-64e.h | 8 ++++++++
>> arch/powerpc/kernel/exceptions-64e.S | 15 ++++++++++++++-
>> arch/powerpc/kernel/head_64.S | 22 ++++++++++++++++++++++
>> arch/powerpc/lib/feature-fixups.c | 7 +++++++
>> 4 files changed, 51 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/powerpc/include/asm/exception-64e.h
>> b/arch/powerpc/include/asm/exception-64e.h
>> index 51fa43e..89e940d 100644
>> --- a/arch/powerpc/include/asm/exception-64e.h
>> +++ b/arch/powerpc/include/asm/exception-64e.h
>> @@ -214,10 +214,18 @@ exc_##label##_book3e:
>> #define TLB_MISS_STATS_SAVE_INFO_BOLTED #endif
>>
>> +#ifndef CONFIG_RELOCATABLE
>> #define SET_IVOR(vector_number, vector_offset) \
>> li r3,vector_offset@l; \
>> ori r3,r3,interrupt_base_book3e@l; \
>> mtspr SPRN_IVOR##vector_number,r3;
>> +#else
>> +#define SET_IVOR(vector_number, vector_offset) \
>> + LOAD_REG_ADDR(r3,interrupt_base_book3e);\
>> + rlwinm r3,r3,0,15,0; \
>> + ori r3,r3,vector_offset@l; \
>> + mtspr SPRN_IVOR##vector_number,r3;
>> +#endif
>>
> [Sethi Varun-B16395] Please add a documentation note here.
Okay.
>
>> #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
>>
>> diff --git a/arch/powerpc/kernel/exceptions-64e.S
>> b/arch/powerpc/kernel/exceptions-64e.S
>> index 645170a..4b23119 100644
>> --- a/arch/powerpc/kernel/exceptions-64e.S
>> +++ b/arch/powerpc/kernel/exceptions-64e.S
>> @@ -1097,7 +1097,15 @@ skpinv: addi r6,r6,1
>> /* Increment */
>> * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
>> */
>> /* Now we branch the new virtual address mapped by this entry */
>> +#ifdef CONFIG_RELOCATABLE
>> + /* We have to find out address from lr. */
>> + bl 1f /* Find our address */
>> +1: mflr r6
>> + addi r6,r6,(2f - 1b)
>> + tovirt(r6,r6)
>> +#else
>> LOAD_REG_IMMEDIATE(r6,2f)
>> +#endif
>> lis r7,MSR_KERNEL@h
>> ori r7,r7,MSR_KERNEL@l
>> mtspr SPRN_SRR0,r6
>> @@ -1348,9 +1356,14 @@ _GLOBAL(book3e_secondary_thread_init)
>> mflr r28
>> b 3b
>>
>> -_STATIC(init_core_book3e)
>> +_GLOBAL(init_core_book3e)
>> /* Establish the interrupt vector base */
>> +#ifdef CONFIG_RELOCATABLE
>> + tovirt(r2,r2)
>> + LOAD_REG_ADDR(r3, interrupt_base_book3e) #else
>> LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
>> +#endif
>> mtspr SPRN_IVPR,r3
>> sync
>> blr
> [Sethi Varun-B16395] Please add a documentation note here as well.
Okay.
>
>> diff --git a/arch/powerpc/kernel/head_64.S
>> b/arch/powerpc/kernel/head_64.S index b61363d..0942f3a 100644
>> --- a/arch/powerpc/kernel/head_64.S
>> +++ b/arch/powerpc/kernel/head_64.S
>> @@ -414,12 +414,22 @@ _STATIC(__after_prom_start)
>> /* process relocations for the final address of the kernel */
>> lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
>> sldi r25,r25,32
>> +#if defined(CONFIG_PPC_BOOK3E)
>> + tovirt(r26,r26) /* on booke, we already run at
>> PAGE_OFFSET */
>> +#endif
>> lwz r7,__run_at_load-_stext(r26)
>> +#if defined(CONFIG_PPC_BOOK3E)
>> + tophys(r26,r26) /* Restore for the remains. */
>> +#endif
>> cmplwi cr0,r7,1 /* flagged to stay where we are ? */
>> bne 1f
>> add r25,r25,r26
>> 1: mr r3,r25
>> bl .relocate
>> +#if defined(CONFIG_PPC_BOOK3E)
>> + /* We should set ivpr again after .relocate. */
>> + bl .init_core_book3e
>> +#endif
>> #endif
>>
> [Sethi Varun-B16395] A more detailed note over here would be useful.
Okay.
>
>> /*
>> @@ -447,12 +457,24 @@ _STATIC(__after_prom_start)
>> * variable __run_at_load, if it is set the kernel is treated as
>> relocatable
>> * kernel, otherwise it will be moved to PHYSICAL_START
>> */
>> +#if defined(CONFIG_PPC_BOOK3E)
>> + tovirt(r26,r26) /* on booke, we already run at
>> PAGE_OFFSET */
>> +#endif
>> lwz r7,__run_at_load-_stext(r26)
>> +#if defined(CONFIG_PPC_BOOK3E)
>> + tophys(r26,r26) /* Restore for the remains. */
>> +#endif
>> cmplwi cr0,r7,1
>> bne 3f
>>
>> +#ifdef CONFIG_PPC_BOOK3E
>> + LOAD_REG_ADDR(r5, interrupt_end_book3e)
>> + LOAD_REG_ADDR(r11, _stext)
>> + sub r5,r5,r11
>> +#else
>> /* just copy interrupts */
>> LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
>> +#endif
>> b 5f
>> 3:
>> #endif
>> diff --git a/arch/powerpc/lib/feature-fixups.c
>> b/arch/powerpc/lib/feature-fixups.c
>> index 7a8a748..13f20ed 100644
>> --- a/arch/powerpc/lib/feature-fixups.c
>> +++ b/arch/powerpc/lib/feature-fixups.c
>> @@ -135,13 +135,20 @@ void do_final_fixups(void) #if
>> defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
>> int *src, *dest;
>> unsigned long length;
>> +#ifdef CONFIG_PPC_BOOK3E
>> + extern char interrupt_end_book3e[];
>> +#endif
> [Sethi Varun-B16395] You can simply move this to sections.h and remove the ifdefs.
I would replace interrupt_end_book3e with __end_interrupts then we can have a
unique label for book3e and book3s as Bharat mentioned previously.
Thanks
Tiejun
^ permalink raw reply [flat|nested] 16+ messages in thread
* [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel
2013-06-20 7:53 [v2][PATCH 0/7] powerpc/book3e: support kexec and kdump Tiejun Chen
2013-06-20 7:53 ` [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE Tiejun Chen
@ 2013-06-20 7:53 ` Tiejun Chen
2013-07-02 5:17 ` Bhushan Bharat-R65777
2013-06-20 7:53 ` [v2][PATCH 3/7] book3e/kexec/kdump: create a 1:1 TLB mapping Tiejun Chen
` (4 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Tiejun Chen @ 2013-06-20 7:53 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, linux-kernel
We need to active KEXEC for book3e and bypass or convert non-book3e stuff
in kexec coverage.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/Kconfig | 2 +-
arch/powerpc/kernel/machine_kexec_64.c | 6 ++++++
arch/powerpc/kernel/misc_64.S | 6 ++++++
3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c33e3ad..6ecf3c9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -364,7 +364,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
config KEXEC
bool "kexec system call"
- depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
+ depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 611acdf..ef39271 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -33,6 +33,7 @@
int default_machine_kexec_prepare(struct kimage *image)
{
int i;
+#ifndef CONFIG_PPC_BOOK3E
unsigned long begin, end; /* limits of segment */
unsigned long low, high; /* limits of blocked memory range */
struct device_node *node;
@@ -41,6 +42,7 @@ int default_machine_kexec_prepare(struct kimage *image)
if (!ppc_md.hpte_clear_all)
return -ENOENT;
+#endif
/*
* Since we use the kernel fault handlers and paging code to
@@ -51,6 +53,7 @@ int default_machine_kexec_prepare(struct kimage *image)
if (image->segment[i].mem < __pa(_end))
return -ETXTBSY;
+#ifndef CONFIG_PPC_BOOK3E
/*
* For non-LPAR, we absolutely can not overwrite the mmu hash
* table, since we are still using the bolted entries in it to
@@ -92,6 +95,7 @@ int default_machine_kexec_prepare(struct kimage *image)
return -ETXTBSY;
}
}
+#endif
return 0;
}
@@ -367,6 +371,7 @@ void default_machine_kexec(struct kimage *image)
/* NOTREACHED */
}
+#ifndef CONFIG_PPC_BOOK3E
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;
@@ -411,3 +416,4 @@ static int __init export_htab_values(void)
return 0;
}
late_initcall(export_htab_values);
+#endif
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 6820e45..f1a7ce7 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -543,9 +543,13 @@ _GLOBAL(kexec_sequence)
lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
/* disable interrupts, we are overwriting kernel data next */
+#ifndef CONFIG_PPC_BOOK3E
mfmsr r3
rlwinm r3,r3,0,17,15
mtmsrd r3,1
+#else
+ wrteei 0
+#endif
/* copy dest pages, flush whole dest image */
mr r3,r29
@@ -567,10 +571,12 @@ _GLOBAL(kexec_sequence)
li r6,1
stw r6,kexec_flag-1b(5)
+#ifndef CONFIG_PPC_BOOK3E
/* clear out hardware hash page table and tlb */
ld r5,0(r27) /* deref function descriptor */
mtctr r5
bctrl /* ppc_md.hpte_clear_all(void); */
+#endif
/*
* kexec image calling is:
--
1.7.9.5
^ permalink raw reply related [flat|nested] 16+ messages in thread* RE: [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel
2013-06-20 7:53 ` [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel Tiejun Chen
@ 2013-07-02 5:17 ` Bhushan Bharat-R65777
2013-07-09 7:50 ` tiejun.chen
0 siblings, 1 reply; 16+ messages in thread
From: Bhushan Bharat-R65777 @ 2013-07-02 5:17 UTC (permalink / raw)
To: Tiejun Chen, benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-
> bounces+bharat.bhushan=3Dfreescale.com@lists.ozlabs.org] On Behalf Of Tie=
jun Chen
> Sent: Thursday, June 20, 2013 1:23 PM
> To: benh@kernel.crashing.org
> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
> Subject: [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel
>=20
> We need to active KEXEC for book3e and bypass or convert non-book3e stuff
> in kexec coverage.
>=20
> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
> ---
> arch/powerpc/Kconfig | 2 +-
> arch/powerpc/kernel/machine_kexec_64.c | 6 ++++++
> arch/powerpc/kernel/misc_64.S | 6 ++++++
> 3 files changed, 13 insertions(+), 1 deletion(-)
>=20
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index c33e3ad..6ecf3c9 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -364,7 +364,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
>=20
> config KEXEC
> bool "kexec system call"
> - depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
> + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
> help
> kexec is a system call that implements the ability to shutdown your
> current kernel, and to start another kernel. It is like a reboot
> diff --git a/arch/powerpc/kernel/machine_kexec_64.c
> b/arch/powerpc/kernel/machine_kexec_64.c
> index 611acdf..ef39271 100644
> --- a/arch/powerpc/kernel/machine_kexec_64.c
> +++ b/arch/powerpc/kernel/machine_kexec_64.c
> @@ -33,6 +33,7 @@
> int default_machine_kexec_prepare(struct kimage *image)
> {
> int i;
> +#ifndef CONFIG_PPC_BOOK3E
> unsigned long begin, end; /* limits of segment */
> unsigned long low, high; /* limits of blocked memory range */
> struct device_node *node;
> @@ -41,6 +42,7 @@ int default_machine_kexec_prepare(struct kimage *image)
>=20
> if (!ppc_md.hpte_clear_all)
> return -ENOENT;
> +#endif
Do we really need this function for book3e? can we have a separate function=
rather than multiple confusing ifdef?
-Bharat
>=20
> /*
> * Since we use the kernel fault handlers and paging code to
> @@ -51,6 +53,7 @@ int default_machine_kexec_prepare(struct kimage *image)
> if (image->segment[i].mem < __pa(_end))
> return -ETXTBSY;
>=20
> +#ifndef CONFIG_PPC_BOOK3E
> /*
> * For non-LPAR, we absolutely can not overwrite the mmu hash
> * table, since we are still using the bolted entries in it to
> @@ -92,6 +95,7 @@ int default_machine_kexec_prepare(struct kimage *image)
> return -ETXTBSY;
> }
> }
> +#endif
>=20
> return 0;
> }
> @@ -367,6 +371,7 @@ void default_machine_kexec(struct kimage *image)
> /* NOTREACHED */
> }
>=20
> +#ifndef CONFIG_PPC_BOOK3E
> /* Values we need to export to the second kernel via the device tree. */
> static unsigned long htab_base;
>=20
> @@ -411,3 +416,4 @@ static int __init export_htab_values(void)
> return 0;
> }
> late_initcall(export_htab_values);
> +#endif
> diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.=
S
> index 6820e45..f1a7ce7 100644
> --- a/arch/powerpc/kernel/misc_64.S
> +++ b/arch/powerpc/kernel/misc_64.S
> @@ -543,9 +543,13 @@ _GLOBAL(kexec_sequence)
> lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
>=20
> /* disable interrupts, we are overwriting kernel data next */
> +#ifndef CONFIG_PPC_BOOK3E
> mfmsr r3
> rlwinm r3,r3,0,17,15
> mtmsrd r3,1
> +#else
> + wrteei 0
> +#endif
>=20
> /* copy dest pages, flush whole dest image */
> mr r3,r29
> @@ -567,10 +571,12 @@ _GLOBAL(kexec_sequence)
> li r6,1
> stw r6,kexec_flag-1b(5)
>=20
> +#ifndef CONFIG_PPC_BOOK3E
> /* clear out hardware hash page table and tlb */
> ld r5,0(r27) /* deref function descriptor */
> mtctr r5
> bctrl /* ppc_md.hpte_clear_all(void); */
> +#endif
>=20
> /*
> * kexec image calling is:
> --
> 1.7.9.5
>=20
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel
2013-07-02 5:17 ` Bhushan Bharat-R65777
@ 2013-07-09 7:50 ` tiejun.chen
0 siblings, 0 replies; 16+ messages in thread
From: tiejun.chen @ 2013-07-09 7:50 UTC (permalink / raw)
To: Bhushan Bharat-R65777
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
On 07/02/2013 01:17 PM, Bhushan Bharat-R65777 wrote:
>
>
>> -----Original Message-----
>> From: Linuxppc-dev [mailto:linuxppc-dev-
>> bounces+bharat.bhushan=freescale.com@lists.ozlabs.org] On Behalf Of Tiejun Chen
>> Sent: Thursday, June 20, 2013 1:23 PM
>> To: benh@kernel.crashing.org
>> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
>> Subject: [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel
>>
>> We need to active KEXEC for book3e and bypass or convert non-book3e stuff
>> in kexec coverage.
>>
>> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
>> ---
>> arch/powerpc/Kconfig | 2 +-
>> arch/powerpc/kernel/machine_kexec_64.c | 6 ++++++
>> arch/powerpc/kernel/misc_64.S | 6 ++++++
>> 3 files changed, 13 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>> index c33e3ad..6ecf3c9 100644
>> --- a/arch/powerpc/Kconfig
>> +++ b/arch/powerpc/Kconfig
>> @@ -364,7 +364,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
>>
>> config KEXEC
>> bool "kexec system call"
>> - depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
>> + depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
>> help
>> kexec is a system call that implements the ability to shutdown your
>> current kernel, and to start another kernel. It is like a reboot
>> diff --git a/arch/powerpc/kernel/machine_kexec_64.c
>> b/arch/powerpc/kernel/machine_kexec_64.c
>> index 611acdf..ef39271 100644
>> --- a/arch/powerpc/kernel/machine_kexec_64.c
>> +++ b/arch/powerpc/kernel/machine_kexec_64.c
>> @@ -33,6 +33,7 @@
>> int default_machine_kexec_prepare(struct kimage *image)
>> {
>> int i;
>> +#ifndef CONFIG_PPC_BOOK3E
>> unsigned long begin, end; /* limits of segment */
>> unsigned long low, high; /* limits of blocked memory range */
>> struct device_node *node;
>> @@ -41,6 +42,7 @@ int default_machine_kexec_prepare(struct kimage *image)
>>
>> if (!ppc_md.hpte_clear_all)
>> return -ENOENT;
>> +#endif
>
> Do we really need this function for book3e? can we have a separate function rather than multiple confusing ifdef?
I prefer we have a separate function to book3e.
Thanks
Tiejun
^ permalink raw reply [flat|nested] 16+ messages in thread
* [v2][PATCH 3/7] book3e/kexec/kdump: create a 1:1 TLB mapping
2013-06-20 7:53 [v2][PATCH 0/7] powerpc/book3e: support kexec and kdump Tiejun Chen
2013-06-20 7:53 ` [v2][PATCH 1/7] powerpc/book3e: support CONFIG_RELOCATABLE Tiejun Chen
2013-06-20 7:53 ` [v2][PATCH 2/7] book3e/kexec/kdump: enable kexec for kernel Tiejun Chen
@ 2013-06-20 7:53 ` Tiejun Chen
2013-06-20 7:53 ` [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel flag Tiejun Chen
` (3 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Tiejun Chen @ 2013-06-20 7:53 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, linux-kernel
book3e have no real MMU mode so we have to create a 1:1 TLB
mapping to make sure we can access the real physical address.
And correct something to support this pseudo real mode on book3e.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/kernel/head_64.S | 9 ++++---
arch/powerpc/kernel/misc_64.S | 55 ++++++++++++++++++++++++++++++++++++++++-
2 files changed, 60 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 0942f3a..3e19ba2 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -444,12 +444,12 @@ _STATIC(__after_prom_start)
tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */
#endif
mr. r4,r26 /* In some cases the loader may */
+#if defined(CONFIG_PPC_BOOK3E)
+ tovirt(r4,r4)
+#endif
beq 9f /* have already put us at zero */
li r6,0x100 /* Start offset, the first 0x100 */
/* bytes were copied earlier. */
-#ifdef CONFIG_PPC_BOOK3E
- tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */
-#endif
#ifdef CONFIG_RELOCATABLE
/*
@@ -492,6 +492,9 @@ _STATIC(__after_prom_start)
p_end: .llong _end - _stext
4: /* Now copy the rest of the kernel up to _end */
+#if defined(CONFIG_PPC_BOOK3E)
+ tovirt(r26,r26)
+#endif
addis r5,r26,(p_end - _stext)@ha
ld r5,(p_end - _stext)@l(r5) /* get _end */
5: bl .copy_and_flush /* copy the rest */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index f1a7ce7..20cbb98 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -460,6 +460,49 @@ kexec_flag:
#ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC_BOOK3E
+/* BOOK3E have no a real MMU mode so we have to setup the initial TLB
+ * for a core to map v:0 to p:0 as 1:1. This current implementation
+ * assume that 1G is enough for kexec.
+ */
+#include <asm/mmu.h>
+kexec_create_tlb:
+ /* Invalidate all TLBs to avoid any TLB conflict. */
+ PPC_TLBILX_ALL(0,R0)
+ sync
+ isync
+
+ mfspr r10,SPRN_TLB1CFG
+ andi. r10,r10,TLBnCFG_N_ENTRY /* Extract # entries */
+ subi r10,r10,1 /* Often its always safe to use last */
+ lis r9,MAS0_TLBSEL(1)@h
+ rlwimi r9,r10,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r9) */
+
+/* Setup a temp mapping v:0 to p:0 as 1:1 and return to it.
+ */
+#ifdef CONFIG_SMP
+#define M_IF_SMP MAS2_M
+#else
+#define M_IF_SMP 0
+#endif
+ mtspr SPRN_MAS0,r9
+
+ lis r9,(MAS1_VALID|MAS1_IPROT)@h
+ ori r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+ mtspr SPRN_MAS1,r9
+
+ LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_SMP)
+ mtspr SPRN_MAS2,r9
+
+ LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
+ mtspr SPRN_MAS3,r9
+ li r9,0
+ mtspr SPRN_MAS7,r9
+
+ tlbwe
+ isync
+ blr
+#endif
/* kexec_smp_wait(void)
*
@@ -473,6 +516,10 @@ kexec_flag:
*/
_GLOBAL(kexec_smp_wait)
lhz r3,PACAHWCPUID(r13)
+#ifdef CONFIG_PPC_BOOK3E
+ /* Create a 1:1 mapping. */
+ bl kexec_create_tlb
+#endif
bl real_mode
li r4,KEXEC_STATE_REAL_MODE
@@ -489,6 +536,7 @@ _GLOBAL(kexec_smp_wait)
* don't overwrite r3 here, it is live for kexec_wait above.
*/
real_mode: /* assume normal blr return */
+#ifndef CONFIG_PPC_BOOK3E
1: li r9,MSR_RI
li r10,MSR_DR|MSR_IR
mflr r11 /* return address to SRR0 */
@@ -500,7 +548,10 @@ real_mode: /* assume normal blr return */
mtspr SPRN_SRR1,r10
mtspr SPRN_SRR0,r11
rfid
-
+#else
+ /* the real mode is nothing for book3e. */
+ blr
+#endif
/*
* kexec_sequence(newstack, start, image, control, clear_all())
@@ -549,6 +600,8 @@ _GLOBAL(kexec_sequence)
mtmsrd r3,1
#else
wrteei 0
+ /* Create a 1:1 mapping. */
+ bl kexec_create_tlb
#endif
/* copy dest pages, flush whole dest image */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 16+ messages in thread* [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel flag
2013-06-20 7:53 [v2][PATCH 0/7] powerpc/book3e: support kexec and kdump Tiejun Chen
` (2 preceding siblings ...)
2013-06-20 7:53 ` [v2][PATCH 3/7] book3e/kexec/kdump: create a 1:1 TLB mapping Tiejun Chen
@ 2013-06-20 7:53 ` Tiejun Chen
2013-07-02 5:37 ` Bhushan Bharat-R65777
2013-06-20 7:53 ` [v2][PATCH 5/7] book3e/kexec/kdump: implement ppc64 kexec specfic Tiejun Chen
` (2 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Tiejun Chen @ 2013-06-20 7:53 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, linux-kernel
We need to introduce a flag to indicate we're already running
a kexec kernel then we can go proper path. For example, We
shouldn't access spin_table from the bootloader to up any secondary
cpu for kexec kernel, and kexec kernel already know how to jump to
generic_secondary_smp_init.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/include/asm/smp.h | 3 +++
arch/powerpc/kernel/head_64.S | 12 ++++++++++++
arch/powerpc/kernel/misc_64.S | 6 ++++++
arch/powerpc/platforms/85xx/smp.c | 14 ++++++++++++++
4 files changed, 35 insertions(+)
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ffbaabe..fbc3d9b 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -200,6 +200,9 @@ extern void generic_secondary_thread_init(void);
extern unsigned long __secondary_hold_spinloop;
extern unsigned long __secondary_hold_acknowledge;
extern char __secondary_hold;
+#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
+extern unsigned long __run_at_kexec;
+#endif
extern void __early_start(void);
#endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 3e19ba2..ffa4b18 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -89,6 +89,12 @@ __secondary_hold_spinloop:
__secondary_hold_acknowledge:
.llong 0x0
+#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
+ .globl __run_at_kexec
+__run_at_kexec:
+ .llong 0x0 /* Flag for the secondary kernel from kexec. */
+#endif
+
#ifdef CONFIG_RELOCATABLE
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
@@ -417,6 +423,12 @@ _STATIC(__after_prom_start)
#if defined(CONFIG_PPC_BOOK3E)
tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */
#endif
+#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
+ /* If relocated we need to restore this flag on that relocated address. */
+ ld r7,__run_at_kexec-_stext(r26)
+ std r7,__run_at_kexec-_stext(r26)
+#endif
+
lwz r7,__run_at_load-_stext(r26)
#if defined(CONFIG_PPC_BOOK3E)
tophys(r26,r26) /* Restore for the remains. */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 20cbb98..c89aead 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -619,6 +619,12 @@ _GLOBAL(kexec_sequence)
bl .copy_and_flush /* (dest, src, copy limit, start offset) */
1: /* assume normal blr return */
+ /* notify we're going into kexec kernel for SMP. */
+ LOAD_REG_ADDR(r3,__run_at_kexec)
+ li r4,1
+ std r4,0(r3)
+ sync
+
/* release other cpus to the new kernel secondary start at 0x60 */
mflr r5
li r6,1
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6a17599..b308373 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -150,6 +150,9 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
int hw_cpu = get_hard_smp_processor_id(nr);
int ioremappable;
int ret = 0;
+#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
+ unsigned long *ptr;
+#endif
WARN_ON(nr < 0 || nr >= NR_CPUS);
WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
@@ -238,11 +241,22 @@ out:
#else
smp_generic_kick_cpu(nr);
+#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
+ ptr = (unsigned long *)((unsigned long)&__run_at_kexec);
+ /* We shouldn't access spin_table from the bootloader to up any
+ * secondary cpu for kexec kernel, and kexec kernel already
+ * know how to jump to generic_secondary_smp_init.
+ */
+ if (!*ptr) {
+#endif
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be64((u64 *)(&spin_table->addr_h),
__pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
flush_spin_table(spin_table);
+#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
+ }
+#endif
#endif
local_irq_restore(flags);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 16+ messages in thread* RE: [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel flag
2013-06-20 7:53 ` [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel flag Tiejun Chen
@ 2013-07-02 5:37 ` Bhushan Bharat-R65777
2013-07-09 7:51 ` tiejun.chen
0 siblings, 1 reply; 16+ messages in thread
From: Bhushan Bharat-R65777 @ 2013-07-02 5:37 UTC (permalink / raw)
To: Tiejun Chen, benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
> -----Original Message-----
> From: Linuxppc-dev [mailto:linuxppc-dev-
> bounces+bharat.bhushan=3Dfreescale.com@lists.ozlabs.org] On Behalf Of Tie=
jun Chen
> Sent: Thursday, June 20, 2013 1:23 PM
> To: benh@kernel.crashing.org
> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
> Subject: [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel fla=
g
>=20
> We need to introduce a flag to indicate we're already running
> a kexec kernel then we can go proper path. For example, We
> shouldn't access spin_table from the bootloader to up any secondary
> cpu for kexec kernel, and kexec kernel already know how to jump to
> generic_secondary_smp_init.
>=20
> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
> ---
> arch/powerpc/include/asm/smp.h | 3 +++
> arch/powerpc/kernel/head_64.S | 12 ++++++++++++
> arch/powerpc/kernel/misc_64.S | 6 ++++++
> arch/powerpc/platforms/85xx/smp.c | 14 ++++++++++++++
> 4 files changed, 35 insertions(+)
>=20
> diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/sm=
p.h
> index ffbaabe..fbc3d9b 100644
> --- a/arch/powerpc/include/asm/smp.h
> +++ b/arch/powerpc/include/asm/smp.h
> @@ -200,6 +200,9 @@ extern void generic_secondary_thread_init(void);
> extern unsigned long __secondary_hold_spinloop;
> extern unsigned long __secondary_hold_acknowledge;
> extern char __secondary_hold;
> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
> +extern unsigned long __run_at_kexec;
> +#endif
>=20
> extern void __early_start(void);
> #endif /* __ASSEMBLY__ */
> diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.=
S
> index 3e19ba2..ffa4b18 100644
> --- a/arch/powerpc/kernel/head_64.S
> +++ b/arch/powerpc/kernel/head_64.S
> @@ -89,6 +89,12 @@ __secondary_hold_spinloop:
> __secondary_hold_acknowledge:
> .llong 0x0
>=20
> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
> + .globl __run_at_kexec
> +__run_at_kexec:
> + .llong 0x0 /* Flag for the secondary kernel from kexec. */
> +#endif
> +
> #ifdef CONFIG_RELOCATABLE
> /* This flag is set to 1 by a loader if the kernel should run
> * at the loaded address instead of the linked address. This
> @@ -417,6 +423,12 @@ _STATIC(__after_prom_start)
> #if defined(CONFIG_PPC_BOOK3E)
> tovirt(r26,r26) /* on booke, we already run at
> PAGE_OFFSET */
> #endif
> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
> + /* If relocated we need to restore this flag on that relocated address.=
*/
> + ld r7,__run_at_kexec-_stext(r26)
> + std r7,__run_at_kexec-_stext(r26)
> +#endif
> +
> lwz r7,__run_at_load-_stext(r26)
> #if defined(CONFIG_PPC_BOOK3E)
> tophys(r26,r26) /* Restore for the remains. */
> diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.=
S
> index 20cbb98..c89aead 100644
> --- a/arch/powerpc/kernel/misc_64.S
> +++ b/arch/powerpc/kernel/misc_64.S
> @@ -619,6 +619,12 @@ _GLOBAL(kexec_sequence)
> bl .copy_and_flush /* (dest, src, copy limit, start offset) */
> 1: /* assume normal blr return */
>=20
> + /* notify we're going into kexec kernel for SMP. */
> + LOAD_REG_ADDR(r3,__run_at_kexec)
> + li r4,1
> + std r4,0(r3)
> + sync
> +
> /* release other cpus to the new kernel secondary start at 0x60 */
> mflr r5
> li r6,1
> diff --git a/arch/powerpc/platforms/85xx/smp.c
> b/arch/powerpc/platforms/85xx/smp.c
> index 6a17599..b308373 100644
> --- a/arch/powerpc/platforms/85xx/smp.c
> +++ b/arch/powerpc/platforms/85xx/smp.c
> @@ -150,6 +150,9 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
> int hw_cpu =3D get_hard_smp_processor_id(nr);
> int ioremappable;
> int ret =3D 0;
> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
> + unsigned long *ptr;
> +#endif
What about if we can remove the ifdef around *ptr ...
>=20
> WARN_ON(nr < 0 || nr >=3D NR_CPUS);
> WARN_ON(hw_cpu < 0 || hw_cpu >=3D NR_CPUS);
> @@ -238,11 +241,22 @@ out:
> #else
> smp_generic_kick_cpu(nr);
>=20
> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
> + ptr =3D (unsigned long *)((unsigned long)&__run_at_kexec);
... #endif here ...
> + /* We shouldn't access spin_table from the bootloader to up any
> + * secondary cpu for kexec kernel, and kexec kernel already
> + * know how to jump to generic_secondary_smp_init.
> + */
> + if (!*ptr) {
> +#endif
... remove #endif ...
> flush_spin_table(spin_table);
> out_be32(&spin_table->pir, hw_cpu);
> out_be64((u64 *)(&spin_table->addr_h),
> __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
> flush_spin_table(spin_table);
> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
> + }
> +#endif
--- remove above 3 lines
-Bharat
> #endif
>=20
> local_irq_restore(flags);
> --
> 1.7.9.5
>=20
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel flag
2013-07-02 5:37 ` Bhushan Bharat-R65777
@ 2013-07-09 7:51 ` tiejun.chen
0 siblings, 0 replies; 16+ messages in thread
From: tiejun.chen @ 2013-07-09 7:51 UTC (permalink / raw)
To: Bhushan Bharat-R65777
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
On 07/02/2013 01:37 PM, Bhushan Bharat-R65777 wrote:
>
>
>> -----Original Message-----
>> From: Linuxppc-dev [mailto:linuxppc-dev-
>> bounces+bharat.bhushan=freescale.com@lists.ozlabs.org] On Behalf Of Tiejun Chen
>> Sent: Thursday, June 20, 2013 1:23 PM
>> To: benh@kernel.crashing.org
>> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org
>> Subject: [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel flag
>>
>> We need to introduce a flag to indicate we're already running
>> a kexec kernel then we can go proper path. For example, We
>> shouldn't access spin_table from the bootloader to up any secondary
>> cpu for kexec kernel, and kexec kernel already know how to jump to
>> generic_secondary_smp_init.
>>
>> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
>> ---
[snip]
>> +++ b/arch/powerpc/platforms/85xx/smp.c
>> @@ -150,6 +150,9 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
>> int hw_cpu = get_hard_smp_processor_id(nr);
>> int ioremappable;
>> int ret = 0;
>> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
>> + unsigned long *ptr;
>> +#endif
>
> What about if we can remove the ifdef around *ptr ...
>
>>
>> WARN_ON(nr < 0 || nr >= NR_CPUS);
>> WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
>> @@ -238,11 +241,22 @@ out:
>> #else
>> smp_generic_kick_cpu(nr);
>>
>> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
>> + ptr = (unsigned long *)((unsigned long)&__run_at_kexec);
>
> ... #endif here ...
>
>> + /* We shouldn't access spin_table from the bootloader to up any
>> + * secondary cpu for kexec kernel, and kexec kernel already
>> + * know how to jump to generic_secondary_smp_init.
>> + */
>> + if (!*ptr) {
>> +#endif
>
> ... remove #endif ...
>
>> flush_spin_table(spin_table);
>> out_be32(&spin_table->pir, hw_cpu);
>> out_be64((u64 *)(&spin_table->addr_h),
>> __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
>> flush_spin_table(spin_table);
>> +#if defined(CONFIG_KEXEC) || defined(CONFIG_CRASH_DUMP)
>> + }
>> +#endif
>
> --- remove above 3 lines
I'd like to try to address your comments next version.
Thanks
Tiejun
^ permalink raw reply [flat|nested] 16+ messages in thread
* [v2][PATCH 5/7] book3e/kexec/kdump: implement ppc64 kexec specfic
2013-06-20 7:53 [v2][PATCH 0/7] powerpc/book3e: support kexec and kdump Tiejun Chen
` (3 preceding siblings ...)
2013-06-20 7:53 ` [v2][PATCH 4/7] book3e/kexec/kdump: introduce a kexec kernel flag Tiejun Chen
@ 2013-06-20 7:53 ` Tiejun Chen
2013-06-20 7:53 ` [v2][PATCH 6/7] book3e/kexec/kdump: redefine VIRT_PHYS_OFFSET Tiejun Chen
2013-06-20 7:53 ` [v2][PATCH 7/7] book3e/kexec/kdump: recover "r4 = 0" to create the initial TLB Tiejun Chen
6 siblings, 0 replies; 16+ messages in thread
From: Tiejun Chen @ 2013-06-20 7:53 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, linux-kernel
ppc64 kexec mechanism has a different implementation with ppc32.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/platforms/85xx/smp.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index b308373..18a5f8a 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -280,6 +280,7 @@ struct smp_ops_t smp_85xx_ops = {
};
#ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC32
atomic_t kexec_down_cpus = ATOMIC_INIT(0);
void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
@@ -298,6 +299,14 @@ static void mpc85xx_smp_kexec_down(void *arg)
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0,1);
}
+#else
+void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+ local_irq_disable();
+ hard_irq_disable();
+ mpic_teardown_this_cpu(secondary);
+}
+#endif
static void map_and_flush(unsigned long paddr)
{
@@ -349,11 +358,14 @@ static void mpc85xx_smp_flush_dcache_kexec(struct kimage *image)
static void mpc85xx_smp_machine_kexec(struct kimage *image)
{
+#ifdef CONFIG_PPC32
int timeout = INT_MAX;
int i, num_cpus = num_present_cpus();
+#endif
mpc85xx_smp_flush_dcache_kexec(image);
+#ifdef CONFIG_PPC32
if (image->type == KEXEC_TYPE_DEFAULT)
smp_call_function(mpc85xx_smp_kexec_down, NULL, 0);
@@ -371,6 +383,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
if ( i == smp_processor_id() ) continue;
mpic_reset_core(i);
}
+#endif
default_machine_kexec(image);
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 16+ messages in thread* [v2][PATCH 6/7] book3e/kexec/kdump: redefine VIRT_PHYS_OFFSET
2013-06-20 7:53 [v2][PATCH 0/7] powerpc/book3e: support kexec and kdump Tiejun Chen
` (4 preceding siblings ...)
2013-06-20 7:53 ` [v2][PATCH 5/7] book3e/kexec/kdump: implement ppc64 kexec specfic Tiejun Chen
@ 2013-06-20 7:53 ` Tiejun Chen
2013-06-20 7:53 ` [v2][PATCH 7/7] book3e/kexec/kdump: recover "r4 = 0" to create the initial TLB Tiejun Chen
6 siblings, 0 replies; 16+ messages in thread
From: Tiejun Chen @ 2013-06-20 7:53 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, linux-kernel
Book3e is always aligned 1GB to create TLB so we should
use (KERNELBASE - MEMORY_START) as VIRT_PHYS_OFFSET to
get __pa/__va properly while boot kdump.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/include/asm/page.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 988c812..5b00081 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -112,6 +112,8 @@ extern long long virt_phys_offset;
/* See Description below for VIRT_PHYS_OFFSET */
#ifdef CONFIG_RELOCATABLE_PPC32
#define VIRT_PHYS_OFFSET virt_phys_offset
+#elif defined(CONFIG_PPC_BOOK3E_64)
+#define VIRT_PHYS_OFFSET (KERNELBASE - MEMORY_START)
#else
#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 16+ messages in thread* [v2][PATCH 7/7] book3e/kexec/kdump: recover "r4 = 0" to create the initial TLB
2013-06-20 7:53 [v2][PATCH 0/7] powerpc/book3e: support kexec and kdump Tiejun Chen
` (5 preceding siblings ...)
2013-06-20 7:53 ` [v2][PATCH 6/7] book3e/kexec/kdump: redefine VIRT_PHYS_OFFSET Tiejun Chen
@ 2013-06-20 7:53 ` Tiejun Chen
6 siblings, 0 replies; 16+ messages in thread
From: Tiejun Chen @ 2013-06-20 7:53 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, linux-kernel
In commit 96f013f, "powerpc/kexec: Add kexec "hold" support for Book3e
processors", requires that GPR4 survive the "hold" process, for IBM Blue
Gene/Q with with some very strange firmware. But for FSL Book3E, r4 = 1
to indicate that the initial TLB entry for this core already exists so
we still should set r4 with 0 to create that initial TLB.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/kernel/head_64.S | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index ffa4b18..63ed1c3 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -129,6 +129,10 @@ __secondary_hold:
/* Grab our physical cpu number */
mr r24,r3
/* stash r4 for book3e */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ /* we need to setup initial TLB entry. */
+ li r4,0
+#endif
mr r25,r4
/* Tell the master cpu we're here */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 16+ messages in thread