From: Nicolin Chen <b42378@freescale.com>
To: <broonie@kernel.org>, <lars@metafoo.de>, <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
linuxppc-dev@lists.ozlabs.org, timur@tabi.org,
rob.herring@calxeda.com
Subject: [PATCH v4 2/2] ASoC: fsl: Add S/PDIF machine driver
Date: Mon, 12 Aug 2013 20:01:10 +0800 [thread overview]
Message-ID: <1376308870-14232-3-git-send-email-b42378@freescale.com> (raw)
In-Reply-To: <1376308870-14232-1-git-send-email-b42378@freescale.com>
Add S/PDIF machine driver for Freescale i.MX series SoC.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
---
.../devicetree/bindings/sound/imx-audio-spdif.txt | 29 +++++
sound/soc/fsl/Kconfig | 11 ++
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/imx-spdif.c | 134 ++++++++++++++++++++
4 files changed, 176 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
create mode 100644 sound/soc/fsl/imx-spdif.c
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
new file mode 100644
index 0000000..9a3fa26
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
@@ -0,0 +1,29 @@
+Freescale i.MX audio complex with S/PDIF transceiver
+
+Required properties:
+
+ - compatible : "fsl,imx-audio-spdif"
+
+ - model : The user-visible name of this sound complex
+
+ - spdif-controller : The phandle of the i.MX S/PDIF controller
+
+
+Optional properties:
+
+ - spdif-transmitter : The phandle of the spdif-transmitter dummy codec
+
+ - spdif-receiver : The phandle of the spdif-receiver dummy codec
+
+* Note: At least one of these two properties should be set in the DT binding.
+
+
+Example:
+
+sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-transmitter = <&spdif_tx_codec>;
+ spdif-receiver = <&spdif_rx_codec>;
+};
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 2c518db..4cc118c 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -195,6 +195,17 @@ config SND_SOC_IMX_SGTL5000
Say Y if you want to add support for SoC audio on an i.MX board with
a sgtl5000 codec.
+config SND_SOC_IMX_SPDIF
+ tristate "SoC Audio support for i.MX boards with S/PDIF"
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_FSL_SPDIF
+ select SND_SOC_FSL_UTILS
+ select SND_SOC_SPDIF
+ help
+ SoC Audio support for i.MX boards with S/PDIF
+ Say Y if you want to add support for SoC audio on an i.MX board with
+ a S/DPDIF.
+
config SND_SOC_IMX_MC13783
tristate "SoC Audio support for I.MX boards with mc13783"
depends on MFD_MC13783 && ARM
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index 4b5970e..e2aaff7 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -45,6 +45,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
snd-soc-wm1133-ev1-objs := wm1133-ev1.o
snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
snd-soc-imx-wm8962-objs := imx-wm8962.o
+snd-soc-imx-spdif-objs :=imx-spdif.o
snd-soc-imx-mc13783-objs := imx-mc13783.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
@@ -53,4 +54,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
+obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
diff --git a/sound/soc/fsl/imx-spdif.c b/sound/soc/fsl/imx-spdif.c
new file mode 100644
index 0000000..893f3d1
--- /dev/null
+++ b/sound/soc/fsl/imx-spdif.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <sound/soc.h>
+
+struct imx_spdif_data {
+ struct snd_soc_dai_link dai[2];
+ struct snd_soc_card card;
+};
+
+static int imx_spdif_audio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *spdif_np, *codec_tx_np, *codec_rx_np;
+ struct platform_device *spdif_pdev;
+ struct imx_spdif_data *data;
+ int ret = 0, num_links = 0;
+
+ spdif_np = of_parse_phandle(np, "spdif-controller", 0);
+ if (!spdif_np) {
+ dev_err(&pdev->dev, "failed to find spdif-controller\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ spdif_pdev = of_find_device_by_node(spdif_np);
+ if (!spdif_pdev) {
+ dev_err(&pdev->dev, "failed to find S/PDIF device\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ codec_tx_np = of_parse_phandle(np, "spdif-transmitter", 0);
+ if (codec_tx_np) {
+ data->dai[num_links].name = "S/PDIF TX";
+ data->dai[num_links].stream_name = "S/PDIF PCM Playback";
+ data->dai[num_links].codec_dai_name = "dit-hifi";
+ data->dai[num_links].codec_of_node = codec_tx_np;
+ data->dai[num_links].cpu_of_node = spdif_np;
+ data->dai[num_links].platform_of_node = spdif_np;
+ num_links++;
+ }
+
+ codec_rx_np = of_parse_phandle(np, "spdif-receiver", 0);
+ if (codec_rx_np) {
+ data->dai[num_links].name = "S/PDIF RX";
+ data->dai[num_links].stream_name = "S/PDIF PCM Capture";
+ data->dai[num_links].codec_dai_name = "dir-hifi";
+ data->dai[num_links].codec_of_node = codec_rx_np;
+ data->dai[num_links].cpu_of_node = spdif_np;
+ data->dai[num_links].platform_of_node = spdif_np;
+ num_links++;
+ }
+
+ if (!num_links) {
+ dev_err(&pdev->dev, "no enabled S/PDIF DAI link\n");
+ goto fail;
+ }
+
+ data->card.dev = &pdev->dev;
+ data->card.num_links = num_links;
+ data->card.dai_link = data->dai;
+
+ ret = snd_soc_of_parse_card_name(&data->card, "model");
+ if (ret)
+ goto fail;
+
+ ret = snd_soc_register_card(&data->card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, data);
+
+fail:
+ if (codec_tx_np)
+ of_node_put(codec_tx_np);
+ if (codec_rx_np)
+ of_node_put(codec_rx_np);
+ if (spdif_np)
+ of_node_put(spdif_np);
+
+ return ret;
+}
+
+static int imx_spdif_audio_remove(struct platform_device *pdev)
+{
+ struct imx_spdif_data *data = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(&data->card);
+
+ return 0;
+}
+
+static const struct of_device_id imx_spdif_dt_ids[] = {
+ { .compatible = "fsl,imx-audio-spdif", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_spdif_dt_ids);
+
+static struct platform_driver imx_spdif_driver = {
+ .driver = {
+ .name = "imx-spdif",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_spdif_dt_ids,
+ },
+ .probe = imx_spdif_audio_probe,
+ .remove = imx_spdif_audio_remove,
+};
+
+module_platform_driver(imx_spdif_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Freescale i.MX S/PDIF machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-spdif");
--
1.7.1
prev parent reply other threads:[~2013-08-12 11:50 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-12 12:01 [PATCH v4 0/2] Add freescale S/PDIF CPU DAI and machine drivers Nicolin Chen
2013-08-12 12:01 ` [PATCH v4 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver Nicolin Chen
2013-08-13 17:58 ` [alsa-devel] " Fabio Estevam
2013-08-13 19:01 ` Fabio Estevam
2013-08-13 19:02 ` Mark Brown
2013-08-14 2:09 ` Nicolin Chen
2013-08-14 3:27 ` Shawn Guo
2013-08-14 5:30 ` Nicolin Chen
2013-08-14 6:39 ` Shawn Guo
2013-08-14 6:34 ` Nicolin Chen
2013-08-14 8:14 ` Shawn Guo
2013-08-14 15:47 ` Stephen Warren
2013-08-15 2:18 ` Nicolin Chen
2013-08-15 9:24 ` Shawn Guo
2013-08-16 22:49 ` Stephen Warren
2013-08-12 12:01 ` Nicolin Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376308870-14232-3-git-send-email-b42378@freescale.com \
--to=b42378@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lars@metafoo.de \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=p.zabel@pengutronix.de \
--cc=rob.herring@calxeda.com \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).