From: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: nfont@linux.vnet.ibm.com, Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Subject: [PATCH 6/8] powerpc/pseries: make dlpar_configure_connector parent node aware
Date: Wed, 14 Aug 2013 22:23:50 -0700 [thread overview]
Message-ID: <1376544232-24936-7-git-send-email-tyreld@linux.vnet.ibm.com> (raw)
In-Reply-To: <1376544232-24936-1-git-send-email-tyreld@linux.vnet.ibm.com>
Currently the device nodes created in the device subtree returned by a call to
dlpar_configure_connector are all named in the root node. This is because the
the node name in the work area returned by ibm,configure-connector rtas call
only contains the node name and not the entire node path. Passing the parent
node where the new subtree will be created to dlpar_configure_connector allows
the correct node path to be prefixed in the full_name field.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
---
arch/powerpc/platforms/pseries/dlpar.c | 55 ++++++++++++++++---------------
arch/powerpc/platforms/pseries/mobility.c | 11 +++----
arch/powerpc/platforms/pseries/pseries.h | 2 +-
3 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index c855233..4ea667d 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -63,21 +63,24 @@ static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
return prop;
}
-static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
+static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa,
+ const char *path)
{
struct device_node *dn;
char *name;
+ /* If parent node path is "/" advance path to NULL terminator to
+ * prevent double leading slashs in full_name.
+ */
+ if (!path[1])
+ path++;
+
dn = kzalloc(sizeof(*dn), GFP_KERNEL);
if (!dn)
return NULL;
- /* The configure connector reported name does not contain a
- * preceding '/', so we allocate a buffer large enough to
- * prepend this to the full_name.
- */
name = (char *)ccwa + ccwa->name_offset;
- dn->full_name = kasprintf(GFP_KERNEL, "/%s", name);
+ dn->full_name = kasprintf(GFP_KERNEL, "%s/%s", path, name);
if (!dn->full_name) {
kfree(dn);
return NULL;
@@ -123,7 +126,8 @@ void dlpar_free_cc_nodes(struct device_node *dn)
#define CALL_AGAIN -2
#define ERR_CFG_USE -9003
-struct device_node *dlpar_configure_connector(u32 drc_index)
+struct device_node *dlpar_configure_connector(u32 drc_index,
+ struct device_node *parent)
{
struct device_node *dn;
struct device_node *first_dn = NULL;
@@ -132,6 +136,7 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
struct property *last_property = NULL;
struct cc_workarea *ccwa;
char *data_buf;
+ const char *parent_path = parent->full_name;
int cc_token;
int rc = -1;
@@ -165,7 +170,7 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
break;
case NEXT_SIBLING:
- dn = dlpar_parse_cc_node(ccwa);
+ dn = dlpar_parse_cc_node(ccwa, parent_path);
if (!dn)
goto cc_error;
@@ -175,13 +180,17 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
break;
case NEXT_CHILD:
- dn = dlpar_parse_cc_node(ccwa);
+ if (first_dn)
+ parent_path = last_dn->full_name;
+
+ dn = dlpar_parse_cc_node(ccwa, parent_path);
if (!dn)
goto cc_error;
- if (!first_dn)
+ if (!first_dn) {
+ dn->parent = parent;
first_dn = dn;
- else {
+ } else {
dn->parent = last_dn;
if (last_dn)
last_dn->child = dn;
@@ -205,6 +214,7 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
case PREV_PARENT:
last_dn = last_dn->parent;
+ parent_path = last_dn->parent->full_name;
break;
case CALL_AGAIN:
@@ -383,9 +393,8 @@ out:
static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
{
- struct device_node *dn;
+ struct device_node *dn, *parent;
unsigned long drc_index;
- char *cpu_name;
int rc;
cpu_hotplug_driver_lock();
@@ -395,25 +404,19 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
goto out;
}
- dn = dlpar_configure_connector(drc_index);
- if (!dn) {
- rc = -EINVAL;
+ parent = of_find_node_by_path("/cpus");
+ if (!parent) {
+ rc = -ENODEV;
goto out;
}
- /* configure-connector reports cpus as living in the base
- * directory of the device tree. CPUs actually live in the
- * cpus directory so we need to fixup the full_name.
- */
- cpu_name = kasprintf(GFP_KERNEL, "/cpus%s", dn->full_name);
- if (!cpu_name) {
- dlpar_free_cc_nodes(dn);
- rc = -ENOMEM;
+ dn = dlpar_configure_connector(drc_index, parent);
+ if (!dn) {
+ rc = -EINVAL;
goto out;
}
- kfree(dn->full_name);
- dn->full_name = cpu_name;
+ of_node_put(parent);
rc = dlpar_acquire_drc(drc_index);
if (rc) {
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index ed5426f..ff102e2 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -216,17 +216,14 @@ static int add_dt_node(u32 parent_phandle, u32 drc_index)
struct device_node *parent_dn;
int rc;
- dn = dlpar_configure_connector(drc_index);
- if (!dn)
+ parent_dn = of_find_node_by_phandle(parent_phandle);
+ if (!parent_dn)
return -ENOENT;
- parent_dn = of_find_node_by_phandle(parent_phandle);
- if (!parent_dn) {
- dlpar_free_cc_nodes(dn);
+ dn = dlpar_configure_connector(drc_index, parent_dn);
+ if (!dn)
return -ENOENT;
- }
- dn->parent = parent_dn;
rc = dlpar_attach_node(dn);
if (rc)
dlpar_free_cc_nodes(dn);
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index c2a3a25..defb3c9 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -56,7 +56,7 @@ extern void hvc_vio_init_early(void);
/* Dynamic logical Partitioning/Mobility */
extern void dlpar_free_cc_nodes(struct device_node *);
extern void dlpar_free_cc_property(struct property *);
-extern struct device_node *dlpar_configure_connector(u32);
+extern struct device_node *dlpar_configure_connector(u32, struct device_node *);
extern int dlpar_attach_node(struct device_node *);
extern int dlpar_detach_node(struct device_node *);
--
1.7.12.4
next prev parent reply other threads:[~2013-08-15 5:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-15 5:23 [PATCH 0/8] powerpc/pseries: fix/cleanup broken mobility device-tree update code Tyrel Datwyler
2013-08-15 5:23 ` [PATCH 1/8] powerpc/pseries: fix creation of loop in device node property list Tyrel Datwyler
2013-08-19 13:43 ` Nathan Fontenot
2013-08-15 5:23 ` [PATCH 2/8] powerpc/pseries: fix over writing of rtas return code in update_dt_node Tyrel Datwyler
2013-08-19 13:44 ` Nathan Fontenot
2013-08-15 5:23 ` [PATCH 3/8] powerpc/pseries: pack update_props_workarea to map correctly to rtas buffer header Tyrel Datwyler
2013-08-19 13:46 ` Nathan Fontenot
2013-08-15 5:23 ` [PATCH 4/8] powerpc/pseries: fix parsing of initial node path in update_dt_node Tyrel Datwyler
2013-08-19 13:48 ` Nathan Fontenot
2013-08-15 5:23 ` [PATCH 5/8] powerpc/pseries: do all node initialization in dlpar_parse_cc_node Tyrel Datwyler
2013-08-19 13:49 ` Nathan Fontenot
2013-08-15 5:23 ` Tyrel Datwyler [this message]
2013-08-19 13:53 ` [PATCH 6/8] powerpc/pseries: make dlpar_configure_connector parent node aware Nathan Fontenot
2013-08-15 5:23 ` [PATCH 7/8] powerpc/pseries: add mising of_node_put in delete_dt_node Tyrel Datwyler
2013-08-19 13:54 ` Nathan Fontenot
2013-08-15 5:23 ` [PATCH 8/8] powerpc/pseries: child nodes are not detached by dlpar_detach_node Tyrel Datwyler
2013-08-19 13:56 ` Nathan Fontenot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376544232-24936-7-git-send-email-tyreld@linux.vnet.ibm.com \
--to=tyreld@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nfont@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).