From: Toshi Kani <toshi.kani@hp.com>
To: rjw@sisk.pl
Cc: fenghua.yu@intel.com, bp@suse.de, Toshi Kani <toshi.kani@hp.com>,
gregkh@linuxfoundation.org, x86@kernel.org,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
isimatu.yasuaki@jp.fujitsu.com, mingo@redhat.com,
srivatsa.bhat@linux.vnet.ibm.com, nfont@linux.vnet.ibm.com,
tglx@linutronix.de, hpa@linux.intel.com,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 4/4] hotplug, powerpc, x86: Remove cpu_hotplug_driver_lock()
Date: Thu, 29 Aug 2013 18:22:09 -0600 [thread overview]
Message-ID: <1377822129-4143-5-git-send-email-toshi.kani@hp.com> (raw)
In-Reply-To: <1377822129-4143-1-git-send-email-toshi.kani@hp.com>
cpu_hotplug_driver_lock() serializes CPU online/offline operations
when ARCH_CPU_PROBE_RELEASE is set. This lock interface is no longer
necessary with the following reason:
- lock_device_hotplug() now protects CPU online/offline operations,
including the probe & release interfaces enabled by
ARCH_CPU_PROBE_RELEASE. The use of cpu_hotplug_driver_lock() is
redundant.
- cpu_hotplug_driver_lock() is only valid when ARCH_CPU_PROBE_RELEASE
is defined, which is misleading and is only enabled on powerpc.
This patch removes the cpu_hotplug_driver_lock() interface. As
a result, ARCH_CPU_PROBE_RELEASE only enables / disables the cpu
probe & release interface as intended. There is no functional change
in this patch.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
---
Performed build test only on powerpc.
---
arch/powerpc/kernel/smp.c | 12 ----------
arch/powerpc/platforms/pseries/dlpar.c | 40 ++++++++++++--------------------
arch/x86/kernel/topology.c | 2 --
drivers/base/cpu.c | 10 +-------
include/linux/cpu.h | 13 ----------
5 files changed, 16 insertions(+), 61 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 38b0ba6..1667269 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -763,18 +763,6 @@ void __cpu_die(unsigned int cpu)
smp_ops->cpu_die(cpu);
}
-static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex);
-
-void cpu_hotplug_driver_lock()
-{
- mutex_lock(&powerpc_cpu_hotplug_driver_mutex);
-}
-
-void cpu_hotplug_driver_unlock()
-{
- mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
-}
-
void cpu_die(void)
{
if (ppc_md.cpu_die)
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index a1a7b9a..e39325d 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -387,18 +387,13 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
char *cpu_name;
int rc;
- cpu_hotplug_driver_lock();
rc = strict_strtoul(buf, 0, &drc_index);
- if (rc) {
- rc = -EINVAL;
- goto out;
- }
+ if (rc)
+ return -EINVAL;
dn = dlpar_configure_connector(drc_index);
- if (!dn) {
- rc = -EINVAL;
- goto out;
- }
+ if (!dn)
+ return -EINVAL;
/* configure-connector reports cpus as living in the base
* directory of the device tree. CPUs actually live in the
@@ -407,8 +402,7 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
cpu_name = kasprintf(GFP_KERNEL, "/cpus%s", dn->full_name);
if (!cpu_name) {
dlpar_free_cc_nodes(dn);
- rc = -ENOMEM;
- goto out;
+ return -ENOMEM;
}
kfree(dn->full_name);
@@ -417,22 +411,21 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
rc = dlpar_acquire_drc(drc_index);
if (rc) {
dlpar_free_cc_nodes(dn);
- rc = -EINVAL;
- goto out;
+ return -EINVAL;
}
rc = dlpar_attach_node(dn);
if (rc) {
dlpar_release_drc(drc_index);
dlpar_free_cc_nodes(dn);
- goto out;
+ return rc;
}
rc = dlpar_online_cpu(dn);
-out:
- cpu_hotplug_driver_unlock();
+ if (rc)
+ return rc;
- return rc ? rc : count;
+ return count;
}
static int dlpar_offline_cpu(struct device_node *dn)
@@ -505,30 +498,27 @@ static ssize_t dlpar_cpu_release(const char *buf, size_t count)
return -EINVAL;
}
- cpu_hotplug_driver_lock();
rc = dlpar_offline_cpu(dn);
if (rc) {
of_node_put(dn);
- rc = -EINVAL;
- goto out;
+ return -EINVAL;
}
rc = dlpar_release_drc(*drc_index);
if (rc) {
of_node_put(dn);
- goto out;
+ return rc;
}
rc = dlpar_detach_node(dn);
if (rc) {
dlpar_acquire_drc(*drc_index);
- goto out;
+ return rc;
}
of_node_put(dn);
-out:
- cpu_hotplug_driver_unlock();
- return rc ? rc : count;
+
+ return count;
}
static int __init pseries_dlpar_init(void)
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index a3f35eb..649b010 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -66,7 +66,6 @@ int __ref _debug_hotplug_cpu(int cpu, int action)
return -EINVAL;
lock_device_hotplug();
- cpu_hotplug_driver_lock();
switch (action) {
case 0:
@@ -91,7 +90,6 @@ int __ref _debug_hotplug_cpu(int cpu, int action)
ret = -EINVAL;
}
- cpu_hotplug_driver_unlock();
unlock_device_hotplug();
return ret;
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index dc78e45..9745f03 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -46,8 +46,6 @@ static int __ref cpu_subsys_online(struct device *dev)
int from_nid, to_nid;
int ret;
- cpu_hotplug_driver_lock();
-
from_nid = cpu_to_node(cpuid);
ret = cpu_up(cpuid);
/*
@@ -58,18 +56,12 @@ static int __ref cpu_subsys_online(struct device *dev)
if (from_nid != to_nid)
change_cpu_under_node(cpu, from_nid, to_nid);
- cpu_hotplug_driver_unlock();
return ret;
}
static int cpu_subsys_offline(struct device *dev)
{
- int ret;
-
- cpu_hotplug_driver_lock();
- ret = cpu_down(dev->id);
- cpu_hotplug_driver_unlock();
- return ret;
+ return cpu_down(dev->id);
}
void unregister_cpu(struct cpu *cpu)
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 801ff9e..3434ef7 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -185,19 +185,6 @@ extern void cpu_hotplug_enable(void);
void clear_tasks_mm_cpumask(int cpu);
int cpu_down(unsigned int cpu);
-#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-extern void cpu_hotplug_driver_lock(void);
-extern void cpu_hotplug_driver_unlock(void);
-#else
-static inline void cpu_hotplug_driver_lock(void)
-{
-}
-
-static inline void cpu_hotplug_driver_unlock(void)
-{
-}
-#endif
-
#else /* CONFIG_HOTPLUG_CPU */
static inline void cpu_hotplug_begin(void) {}
next prev parent reply other threads:[~2013-08-30 0:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-30 0:22 [PATCH v2 0/4] Unify CPU hotplug lock interface Toshi Kani
2013-08-30 0:22 ` [PATCH v2 1/4] hotplug, x86: Fix online state in cpu0 debug interface Toshi Kani
2013-08-31 0:24 ` Rafael J. Wysocki
2013-08-30 0:22 ` [PATCH v2 2/4] hotplug, x86: Add hotplug lock to missing places Toshi Kani
2013-08-30 0:22 ` [PATCH v2 3/4] hotplug, x86: Disable ARCH_CPU_PROBE_RELEASE on x86 Toshi Kani
2013-08-30 0:22 ` Toshi Kani [this message]
2013-09-25 8:27 ` [PATCH v2 4/4] hotplug, powerpc, x86: Remove cpu_hotplug_driver_lock() Rafael J. Wysocki
2013-09-25 20:44 ` Toshi Kani
2013-08-30 2:44 ` [PATCH v2 0/4] Unify CPU hotplug lock interface Yasuaki Ishimatsu
2013-08-30 12:14 ` Rafael J. Wysocki
2013-08-30 14:35 ` Toshi Kani
2013-08-30 14:33 ` Toshi Kani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377822129-4143-5-git-send-email-toshi.kani@hp.com \
--to=toshi.kani@hp.com \
--cc=bp@suse.de \
--cc=fenghua.yu@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=hpa@linux.intel.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mingo@redhat.com \
--cc=nfont@linux.vnet.ibm.com \
--cc=rjw@sisk.pl \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).