From: Gavin Shan <shangw@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Subject: [PATCH 2/6] powerpc/powernv: Support inbound error injection
Date: Fri, 6 Sep 2013 09:00:01 +0800 [thread overview]
Message-ID: <1378429205-16248-3-git-send-email-shangw@linux.vnet.ibm.com> (raw)
In-Reply-To: <1378429205-16248-1-git-send-email-shangw@linux.vnet.ibm.com>
For now, we only support outbound error injection. Actually, the
hardware supports injecting inbound errors as well. The patch enables
to inject inbound errors.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/eeh-ioda.c | 59 ++++++++++++++++++++++++----
1 files changed, 50 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 855c1d5..3ee44b0 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -66,26 +66,60 @@ static struct notifier_block ioda_eeh_nb = {
};
#ifdef CONFIG_DEBUG_FS
-static int ioda_eeh_dbgfs_set(void *data, u64 val)
+static int ioda_eeh_dbgfs_set(void *data, int offset, u64 val)
{
struct pci_controller *hose = data;
struct pnv_phb *phb = hose->private_data;
- out_be64(phb->regs + 0xD10, val);
+ out_be64(phb->regs + offset, val);
return 0;
}
-static int ioda_eeh_dbgfs_get(void *data, u64 *val)
+static int ioda_eeh_dbgfs_get(void *data, int offset, u64 *val)
{
struct pci_controller *hose = data;
struct pnv_phb *phb = hose->private_data;
- *val = in_be64(phb->regs + 0xD10);
+ *val = in_be64(phb->regs + offset);
return 0;
}
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_dbgfs_ops, ioda_eeh_dbgfs_get,
- ioda_eeh_dbgfs_set, "0x%llx\n");
+static int ioda_eeh_outb_dbgfs_set(void *data, u64 val)
+{
+ return ioda_eeh_dbgfs_set(data, 0xD10, val);
+}
+
+static int ioda_eeh_outb_dbgfs_get(void *data, u64 *val)
+{
+ return ioda_eeh_dbgfs_get(data, 0xD10, val);
+}
+
+static int ioda_eeh_inbA_dbgfs_set(void *data, u64 val)
+{
+ return ioda_eeh_dbgfs_set(data, 0xD90, val);
+}
+
+static int ioda_eeh_inbA_dbgfs_get(void *data, u64 *val)
+{
+ return ioda_eeh_dbgfs_get(data, 0xD90, val);
+}
+
+static int ioda_eeh_inbB_dbgfs_set(void *data, u64 val)
+{
+ return ioda_eeh_dbgfs_set(data, 0xE10, val);
+}
+
+static int ioda_eeh_inbB_dbgfs_get(void *data, u64 *val)
+{
+ return ioda_eeh_dbgfs_get(data, 0xE10, val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_outb_dbgfs_ops, ioda_eeh_outb_dbgfs_get,
+ ioda_eeh_outb_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbA_dbgfs_ops, ioda_eeh_inbA_dbgfs_get,
+ ioda_eeh_inbA_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get,
+ ioda_eeh_inbB_dbgfs_set, "0x%llx\n");
#endif /* CONFIG_DEBUG_FS */
/**
@@ -123,10 +157,17 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
}
#ifdef CONFIG_DEBUG_FS
- if (phb->dbgfs)
- debugfs_create_file("err_injct", 0600,
+ if (phb->dbgfs) {
+ debugfs_create_file("err_injct_outbound", 0600,
+ phb->dbgfs, hose,
+ &ioda_eeh_outb_dbgfs_ops);
+ debugfs_create_file("err_injct_inboundA", 0600,
phb->dbgfs, hose,
- &ioda_eeh_dbgfs_ops);
+ &ioda_eeh_inbA_dbgfs_ops);
+ debugfs_create_file("err_injct_inboundB", 0600,
+ phb->dbgfs, hose,
+ &ioda_eeh_inbB_dbgfs_ops);
+ }
#endif
phb->eeh_state |= PNV_EEH_STATE_ENABLED;
--
1.7.5.4
next prev parent reply other threads:[~2013-09-06 1:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-06 0:59 [PATCH 0/6] EEH Support for PHB3 Gavin Shan
2013-09-06 1:00 ` [PATCH 1/6] powerpc/powernv: Enable EEH " Gavin Shan
2013-09-06 1:00 ` Gavin Shan [this message]
2013-09-06 1:00 ` [PATCH 3/6] powerpc/eeh: Output error number Gavin Shan
2013-09-06 1:00 ` [PATCH 4/6] powerpc/powernv: Double size of log blob Gavin Shan
2013-09-06 1:00 ` [PATCH 5/6] powerpc/eeh: Output PHB3 diag-data Gavin Shan
2013-09-06 1:00 ` [PATCH 6/6] powerpc/eeh: Reorder output messages Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378429205-16248-3-git-send-email-shangw@linux.vnet.ibm.com \
--to=shangw@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox