From: Jia Hongtao <hongtao.jia@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>, <galak@kernel.crashing.org>,
<B07421@freescale.com>
Cc: hongtao.jia@freescale.com, Wei.Yang@windriver.com
Subject: [PATCH V3] powerpc: Add I2C bus multiplexer node for B4 and T4240QDS
Date: Mon, 9 Sep 2013 18:03:33 +0800 [thread overview]
Message-ID: <1378721013-20113-1-git-send-email-hongtao.jia@freescale.com> (raw)
In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used.
The sub-nodes are also reorganized according to right I2C topology.
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
---
V3 change log:
* Change "channel" to "i2c" based on i2c-mux binding.
* Update vendor from philips to nxp.
V2 change log:
* Reorganized the sub-nodes under I2C multiplexer to represent right topology.
arch/powerpc/boot/dts/b4qds.dtsi | 51 +++++++++++++++++-----------
arch/powerpc/boot/dts/t4240qds.dts | 69 ++++++++++++++++++++++----------------
2 files changed, 73 insertions(+), 47 deletions(-)
diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi
index e6d2f8f..8b47edc 100644
--- a/arch/powerpc/boot/dts/b4qds.dtsi
+++ b/arch/powerpc/boot/dts/b4qds.dtsi
@@ -120,25 +120,38 @@
};
i2c@118000 {
- eeprom@50 {
- compatible = "at24,24c64";
- reg = <0x50>;
- };
- eeprom@51 {
- compatible = "at24,24c256";
- reg = <0x51>;
- };
- eeprom@53 {
- compatible = "at24,24c256";
- reg = <0x53>;
- };
- eeprom@57 {
- compatible = "at24,24c256";
- reg = <0x57>;
- };
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
+ mux@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "at24,24c64";
+ reg = <0x50>;
+ };
+ eeprom@51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom@53 {
+ compatible = "at24,24c256";
+ reg = <0x53>;
+ };
+ eeprom@57 {
+ compatible = "at24,24c256";
+ reg = <0x57>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
};
};
diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/t4240qds.dts
index 0555976..a35508f 100644
--- a/arch/powerpc/boot/dts/t4240qds.dts
+++ b/arch/powerpc/boot/dts/t4240qds.dts
@@ -118,34 +118,47 @@
};
i2c@118000 {
- eeprom@51 {
- compatible = "at24,24c256";
- reg = <0x51>;
- };
- eeprom@52 {
- compatible = "at24,24c256";
- reg = <0x52>;
- };
- eeprom@53 {
- compatible = "at24,24c256";
- reg = <0x53>;
- };
- eeprom@54 {
- compatible = "at24,24c256";
- reg = <0x54>;
- };
- eeprom@55 {
- compatible = "at24,24c256";
- reg = <0x55>;
- };
- eeprom@56 {
- compatible = "at24,24c256";
- reg = <0x56>;
- };
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0x1 0x1 0 0>;
+ mux@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom@52 {
+ compatible = "at24,24c256";
+ reg = <0x52>;
+ };
+ eeprom@53 {
+ compatible = "at24,24c256";
+ reg = <0x53>;
+ };
+ eeprom@54 {
+ compatible = "at24,24c256";
+ reg = <0x54>;
+ };
+ eeprom@55 {
+ compatible = "at24,24c256";
+ reg = <0x55>;
+ };
+ eeprom@56 {
+ compatible = "at24,24c256";
+ reg = <0x56>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0x1 0x1 0 0>;
+ };
+ };
};
};
};
--
1.8.0
next reply other threads:[~2013-09-09 10:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-09 10:03 Jia Hongtao [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-09-09 1:41 [PATCH V3] powerpc: Add I2C bus multiplexer node for B4 and T4240QDS Jia Hongtao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378721013-20113-1-git-send-email-hongtao.jia@freescale.com \
--to=hongtao.jia@freescale.com \
--cc=B07421@freescale.com \
--cc=Wei.Yang@windriver.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).