From: Zhao Qiang <B45475@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: Zhao Qiang <B45475@freescale.com>,
Shengzhou Liu <Shengzhou.Liu@freescale.com>
Subject: [PATCH] powerpc/p1010rdb:update dts to adapt to both old and new p1010rdb
Date: Sun, 22 Sep 2013 10:28:39 +0800 [thread overview]
Message-ID: <1379816919-13851-1-git-send-email-B45475@freescale.com> (raw)
P1010rdb-pa and p1010rdb-pb have different phy interrupts.
So update dts to adapt to both p1010rdb-pa and p1010rdb-pb.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Zhao Qiang <B45475@freescale.com>
---
arch/powerpc/boot/dts/p1010rdb-pa.dts | 33 ++++++++++++++++++
arch/powerpc/boot/dts/p1010rdb-pb.dts | 33 ++++++++++++++++++
arch/powerpc/boot/dts/p1010rdb.dts | 66 -----------------------------------
arch/powerpc/boot/dts/p1010rdb.dtsi | 51 ++++++++++++++++++++++++---
4 files changed, 112 insertions(+), 71 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1010rdb-pa.dts
create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb.dts
delete mode 100644 arch/powerpc/boot/dts/p1010rdb.dts
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts
new file mode 100644
index 0000000..e1688d4
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts
@@ -0,0 +1,33 @@
+/*
+ * P1010 RDB-PA Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB-PA";
+ compatible = "fsl,P1010RDB";
+
+ /include/ "p1010rdb.dtsi"
+};
+
+&phy0 {
+ interrupts = <3 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <2 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts
new file mode 100644
index 0000000..37f9366
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts
@@ -0,0 +1,33 @@
+/*
+ * P1010 RDB-PB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB-PB";
+ compatible = "fsl,P1010RDB";
+
+ /include/ "p1010rdb.dtsi"
+};
+
+&phy0 {
+ interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+ interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+ interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
deleted file mode 100644
index b868d22..0000000
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * P1010 RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
- model = "fsl,P1010RDB";
- compatible = "fsl,P1010RDB";
-
- memory {
- device_type = "memory";
- };
-
- board_ifc: ifc: ifc@ffe1e000 {
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0x0 0xee000000 0x02000000
- 0x1 0x0 0x0 0xff800000 0x00010000
- 0x3 0x0 0x0 0xffb00000 0x00000020>;
- reg = <0x0 0xffe1e000 0 0x2000>;
- };
-
- board_soc: soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- };
-
- pci0: pcie@ffe09000 {
- reg = <0 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- reg = <0 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "p1010rdb.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index 7fc3402..5e5ca56 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -32,7 +32,17 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-&board_ifc {
+memory {
+ device_type = "memory";
+};
+
+board_ifc: ifc: ifc@ffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+ 0x1 0x0 0x0 0xff800000 0x00010000
+ 0x3 0x0 0x0 0xffb00000 0x00000020>;
+ reg = <0x0 0xffe1e000 0 0x2000>;
+
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -124,7 +134,9 @@
};
};
-&board_soc {
+board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
i2c@3000 {
eeprom@50 {
compatible = "st,24c256";
@@ -199,17 +211,14 @@
mdio@24000 {
phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
- interrupts = <2 1 0 0>;
reg = <0x0>;
};
phy2: ethernet-phy@2 {
- interrupts = <2 1 0 0>;
reg = <0x2>;
};
@@ -261,3 +270,35 @@
ptimer-handle = <&ptp_timer>;
};
};
+
+pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
+
+pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+};
--
1.8.0
next reply other threads:[~2013-09-22 2:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-22 2:28 Zhao Qiang [this message]
2013-09-27 21:35 ` [PATCH] powerpc/p1010rdb:update dts to adapt to both old and new p1010rdb Scott Wood
2013-09-29 2:29 ` Zhao Qiang-B45475
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379816919-13851-1-git-send-email-B45475@freescale.com \
--to=b45475@freescale.com \
--cc=Shengzhou.Liu@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).