From: Kevin Hao <haokexin@gmail.com>
To: Scott Wood <scottwood@freescale.com>
Cc: linuxppc <linuxppc-dev@lists.ozlabs.org>
Subject: [PATCH v4 3/3] powerpc/85xx: use one kernel option for all the CoreNet_Generic boards
Date: Thu, 26 Sep 2013 09:42:28 +0800 [thread overview]
Message-ID: <1380159748-10559-4-git-send-email-haokexin@gmail.com> (raw)
In-Reply-To: <1380159748-10559-1-git-send-email-haokexin@gmail.com>
Currently all these boards use the same machine struct and also select
the same kernel options, so it seems a bit of redundant to keep one
separate kernel option for each board. Also update the defconfigs
according to this change.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
---
v4: Combine the separate kernel option for 32bit and 64bit into one.
v3: A new patch in v3.
arch/powerpc/configs/corenet32_smp_defconfig | 6 +-
arch/powerpc/configs/corenet64_smp_defconfig | 5 +-
arch/powerpc/configs/ppc64e_defconfig | 2 +-
arch/powerpc/platforms/85xx/Kconfig | 111 +++------------------------
4 files changed, 13 insertions(+), 111 deletions(-)
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 3dfab4c..1d9cb29 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -23,11 +23,7 @@ CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
-CONFIG_P2041_RDB=y
-CONFIG_P3041_DS=y
-CONFIG_P4080_DS=y
-CONFIG_P5020_DS=y
-CONFIG_P5040_DS=y
+CONFIG_CORENET_GENERIC=y
CONFIG_HIGHMEM=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index fa94fb3..63508dd 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -21,10 +21,7 @@ CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
-CONFIG_B4_QDS=y
-CONFIG_P5020_DS=y
-CONFIG_P5040_DS=y
-CONFIG_T4240_QDS=y
+CONFIG_CORENET_GENERIC=y
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 0085dc4..0a6be6d 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -23,7 +23,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_P5020_DS=y
+CONFIG_CORENET_GENERIC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 3bee943..4d46349 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -218,88 +218,16 @@ config GE_IMP3A
This board is a 3U CompactPCI Single Board Computer with a Freescale
P2020 processor.
-config P2041_RDB
- bool "Freescale P2041 RDB"
- select DEFAULT_UIMAGE
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select ARCH_REQUIRE_GPIOLIB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- select CORENET_GENERIC
- help
- This option enables support for the P2041 RDB board
-
-config P3041_DS
- bool "Freescale P3041 DS"
- select DEFAULT_UIMAGE
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select ARCH_REQUIRE_GPIOLIB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- select CORENET_GENERIC
- help
- This option enables support for the P3041 DS board
-
-config P4080_DS
- bool "Freescale P4080 DS"
- select DEFAULT_UIMAGE
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select ARCH_REQUIRE_GPIOLIB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- select CORENET_GENERIC
- help
- This option enables support for the P4080 DS board
-
config SGY_CTS1000
tristate "Servergy CTS-1000 support"
select GPIOLIB
select OF_GPIO
- depends on P4080_DS
+ depends on CORENET_GENERIC
help
Enable this to support functionality in Servergy's CTS-1000 systems.
endif # PPC32
-config P5020_DS
- bool "Freescale P5020 DS"
- select DEFAULT_UIMAGE
- select E500
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select ARCH_REQUIRE_GPIOLIB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- select CORENET_GENERIC
- help
- This option enables support for the P5020 DS board
-
-config P5040_DS
- bool "Freescale P5040 DS"
- select DEFAULT_UIMAGE
- select E500
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select ARCH_REQUIRE_GPIOLIB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- select CORENET_GENERIC
- help
- This option enables support for the P5040 DS board
-
config PPC_QEMU_E500
bool "QEMU generic e500 platform"
select DEFAULT_UIMAGE
@@ -315,10 +243,8 @@ config PPC_QEMU_E500
unset based on the emulated CPU (or actual host CPU in the case
of KVM).
-if PPC64
-
-config T4240_QDS
- bool "Freescale T4240 QDS"
+config CORENET_GENERIC
+ bool "Freescale CoreNet Generic"
select DEFAULT_UIMAGE
select E500
select PPC_E500MC
@@ -328,33 +254,16 @@ config T4240_QDS
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
- select CORENET_GENERIC
help
- This option enables support for the T4240 QDS board
+ This option enables support for the FSL CoreNet based boards.
+ For 32bit kernel, the following boards are supported:
+ P2041 RDB, P3041 DS and P4080 DS
+ For 64bit kernel, the following boards are supported:
+ T4240 QDS and B4 QDS
+ The following boards are supported for both 32bit and 64bit kernel:
+ P5020 DS and P5040 DS
-config B4_QDS
- bool "Freescale B4 QDS"
- select DEFAULT_UIMAGE
- select E500
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select GPIOLIB
- select ARCH_REQUIRE_GPIOLIB
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- select CORENET_GENERIC
- help
- This option enables support for the B4 QDS board
- The B4 application development system B4 QDS is a complete
- debugging environment intended for engineers developing
- applications for the B4.
-
-endif
endif # FSL_SOC_BOOKE
config TQM85xx
bool
-
-config CORENET_GENERIC
- bool
--
1.8.3.1
prev parent reply other threads:[~2013-09-26 1:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-26 1:42 [PATCH v4 0/3] powerpc/85xx: introduce corenet_generic machine Kevin Hao
2013-09-26 1:42 ` [PATCH v4 1/3] " Kevin Hao
2013-09-26 1:42 ` [PATCH v4 2/3] powerpc/85xx: rename the corenet_ds.c to corenet_generic.c Kevin Hao
2013-09-26 1:42 ` Kevin Hao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380159748-10559-4-git-send-email-haokexin@gmail.com \
--to=haokexin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).