From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH -V2 2/2] powerpc: Free up _PAGE_COHERENCE for numa fault use later
Date: Thu, 3 Oct 2013 19:52:20 +0530 [thread overview]
Message-ID: <1380810140-11015-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1380810140-11015-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Set memory coherence always on hash64 config. If
a platform cannot have memory coherence always set they
can infer that from _PAGE_NO_CACHE and _PAGE_WRITETHRU
like in lpar. So we dont' really need a separate bit
for tracking _PAGE_COHERENCE.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
Changes from v1:
Fix boot issue with Phyp, because of missing HPTE_R_M on bolted entries.
arch/powerpc/include/asm/pte-hash64.h | 2 +-
arch/powerpc/mm/hash_low_64.S | 15 ++++++++++++---
arch/powerpc/mm/hash_utils_64.c | 7 ++++---
arch/powerpc/mm/hugepage-hash64.c | 6 +++++-
arch/powerpc/mm/hugetlbpage-hash64.c | 4 ++++
5 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/pte-hash64.h b/arch/powerpc/include/asm/pte-hash64.h
index 0419eeb..55aea0c 100644
--- a/arch/powerpc/include/asm/pte-hash64.h
+++ b/arch/powerpc/include/asm/pte-hash64.h
@@ -19,7 +19,7 @@
#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */
#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
#define _PAGE_GUARDED 0x0008
-#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */
+/* We can derive Memory coherence from _PAGE_NO_CACHE */
#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */
#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
#define _PAGE_DIRTY 0x0080 /* C: page changed */
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index d3cbda6..1136d26 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -148,7 +148,10 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
andc r0,r30,r0 /* r0 = pte & ~r0 */
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
- ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */
+ /*
+ * Always add "C" bit for perf. Memory coherence is always enabled
+ */
+ ori r3,r3,HPTE_R_C | HPTE_R_M
/* We eventually do the icache sync here (maybe inline that
* code rather than call a C function...)
@@ -457,7 +460,10 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
andc r0,r3,r0 /* r0 = pte & ~r0 */
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
- ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */
+ /*
+ * Always add "C" bit for perf. Memory coherence is always enabled
+ */
+ ori r3,r3,HPTE_R_C | HPTE_R_M
/* We eventually do the icache sync here (maybe inline that
* code rather than call a C function...)
@@ -795,7 +801,10 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
andc r0,r30,r0 /* r0 = pte & ~r0 */
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
- ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */
+ /*
+ * Always add "C" bit for perf. Memory coherence is always enabled
+ */
+ ori r3,r3,HPTE_R_C | HPTE_R_M
/* We eventually do the icache sync here (maybe inline that
* code rather than call a C function...)
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 6ecc38b..4e9b932 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -169,9 +169,10 @@ static unsigned long htab_convert_pte_flags(unsigned long pteflags)
if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) &&
(pteflags & _PAGE_DIRTY)))
rflags |= 1;
-
- /* Always add C */
- return rflags | HPTE_R_C;
+ /*
+ * Always add "C" bit for perf. Memory coherence is always enabled
+ */
+ return rflags | HPTE_R_C | HPTE_R_M;
}
int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
diff --git a/arch/powerpc/mm/hugepage-hash64.c b/arch/powerpc/mm/hugepage-hash64.c
index 34de9e0..b640595 100644
--- a/arch/powerpc/mm/hugepage-hash64.c
+++ b/arch/powerpc/mm/hugepage-hash64.c
@@ -127,7 +127,11 @@ repeat:
/* Add in WIMG bits */
rflags |= (new_pmd & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
- _PAGE_COHERENT | _PAGE_GUARDED));
+ _PAGE_GUARDED));
+ /*
+ * enable the memory coherence always
+ */
+ rflgs |= HPTE_R_M;
/* Insert into the hash table, primary slot */
slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0,
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index 0b7fb67..a5bcf93 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -99,6 +99,10 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
/* Add in WIMG bits */
rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
_PAGE_COHERENT | _PAGE_GUARDED));
+ /*
+ * enable the memory coherence always
+ */
+ rflags |= HPTE_R_M;
slot = hpte_insert_repeating(hash, vpn, pa, rflags, 0,
mmu_psize, ssize);
--
1.8.1.2
next prev parent reply other threads:[~2013-10-03 14:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-03 14:22 [PATCH -V2 1/2] powerpc: Use HPTE constants when updating hpte bits Aneesh Kumar K.V
2013-10-03 14:22 ` Aneesh Kumar K.V [this message]
2013-10-08 3:15 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380810140-11015-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).