linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Varun Sethi <Varun.Sethi@freescale.com>
To: <joro@8bytes.org>, <iommu@lists.linux-foundation.org>,
	<linuxppc-dev@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
	<stuart.yoder@freescale.com>, <scottwood@freescale.com>,
	<alex.williamson@redhat.com>, <r65777@freescale.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
Subject: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices
Date: Wed, 16 Oct 2013 16:53:01 +0530	[thread overview]
Message-ID: <1381922582-28724-3-git-send-email-Varun.Sethi@freescale.com> (raw)
In-Reply-To: <1381922582-28724-1-git-send-email-Varun.Sethi@freescale.com>

Once the PCIe device assigned to a guest VM (via VFIO) gets detached from the iommu domain
(when guest terminates), its PAMU table entry is disabled. So, this would prevent the device
from being used once it's assigned back to the host.

This patch allows for creation of a default DMA window corresponding to the device
and subsequently enabling the PAMU table entry. Before we enable the entry, we ensure that
the device's bus master capability is disabled (device quiesced).

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
---
 drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++--------
 drivers/iommu/fsl_pamu.h        |    1 +
 drivers/iommu/fsl_pamu_domain.c |   46 ++++++++++++++++++++++++++++++++++++---
 3 files changed, 78 insertions(+), 12 deletions(-)

diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index cba0498..fb4a031 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct paace *paace, u32 wnum)
 	return spaace;
 }
 
+/*
+ * Defaul PPAACE settings for an LIODN.
+ */
+static void setup_default_ppaace(struct paace *ppaace)
+{
+	pamu_init_ppaace(ppaace);
+	/* window size is 2^(WSE+1) bytes */
+	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
+	ppaace->wbah = 0;
+	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
+	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
+		PAACE_ATM_NO_XLATE);
+	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
+		PAACE_AP_PERMS_ALL);
+}
 /**
  * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves subwindows
  *                                required for primary PAACE in the secondary
@@ -253,6 +268,24 @@ static unsigned long pamu_get_fspi_and_allocate(u32 subwin_cnt)
 	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct paace));
 }
 
+/* Reset the PAACE entry to the default state */
+void enable_default_dma_window(int liodn)
+{
+	struct paace *ppaace;
+
+	ppaace = pamu_get_ppaace(liodn);
+	if (!ppaace) {
+		pr_debug("Invalid liodn entry\n");
+		return;
+	}
+
+	memset(ppaace, 0, sizeof(struct paace));
+
+	setup_default_ppaace(ppaace);
+	mb();
+	pamu_enable_liodn(liodn);
+}
+
 /* Release the subwindows reserved for a particular LIODN */
 void pamu_free_subwins(int liodn)
 {
@@ -752,15 +785,7 @@ static void __init setup_liodns(void)
 				continue;
 			}
 			ppaace = pamu_get_ppaace(liodn);
-			pamu_init_ppaace(ppaace);
-			/* window size is 2^(WSE+1) bytes */
-			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
-			ppaace->wbah = 0;
-			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
-			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
-				PAACE_ATM_NO_XLATE);
-			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
-				PAACE_AP_PERMS_ALL);
+			setup_default_ppaace(ppaace);
 			if (of_device_is_compatible(node, "fsl,qman-portal"))
 				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
 			if (of_device_is_compatible(node, "fsl,qman"))
diff --git a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h
index 8fc1a12..0edcbbbb 100644
--- a/drivers/iommu/fsl_pamu.h
+++ b/drivers/iommu/fsl_pamu.h
@@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device *dev);
 int  pamu_update_paace_stash(int liodn, u32 subwin, u32 value);
 int pamu_disable_spaace(int liodn, u32 subwin);
 u32 pamu_get_max_subwin_cnt(void);
+void enable_default_dma_window(int liodn);
 
 #endif  /* __FSL_PAMU_H */
diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
index 966ae70..dd6cafc 100644
--- a/drivers/iommu/fsl_pamu_domain.c
+++ b/drivers/iommu/fsl_pamu_domain.c
@@ -340,17 +340,57 @@ static inline struct device_domain_info *find_domain(struct device *dev)
 	return dev->archdata.iommu_domain;
 }
 
+/* Disable device DMA capability and enable default DMA window */
+static void disable_device_dma(struct device_domain_info *info,
+				int enable_dma_window)
+{
+#ifdef CONFIG_PCI
+	if (info->dev->bus == &pci_bus_type) {
+		struct pci_dev *pdev = NULL;
+		pdev = to_pci_dev(info->dev);
+		if (pci_is_enabled(pdev))
+			pci_disable_device(pdev);
+	}
+#endif
+
+	if (enable_dma_window)
+		enable_default_dma_window(info->liodn);
+}
+
+static int check_for_shared_liodn(struct device_domain_info *info)
+{
+	struct device_domain_info *tmp;
+
+	/*
+	 * Sanity check, to ensure that this is not a
+	 * shared LIODN. In case of a PCIe controller
+	 * it's possible that all PCIe devices share
+	 * the same LIODN.
+	 */
+	list_for_each_entry(tmp, &info->domain->devices, link) {
+		if (info->liodn == tmp->liodn)
+			return 1;
+	}
+
+	return 0;
+}
+
 static void remove_device_ref(struct device_domain_info *info, u32 win_cnt)
 {
 	unsigned long flags;
+	int enable_dma_window = 0;
 
 	list_del(&info->link);
 	spin_lock_irqsave(&iommu_lock, flags);
-	if (win_cnt > 1)
-		pamu_free_subwins(info->liodn);
-	pamu_disable_liodn(info->liodn);
+	if (!check_for_shared_liodn(info)) {
+		if (win_cnt > 1)
+			pamu_free_subwins(info->liodn);
+		pamu_disable_liodn(info->liodn);
+		enable_dma_window = 1;
+	}
 	spin_unlock_irqrestore(&iommu_lock, flags);
 	spin_lock_irqsave(&device_domain_lock, flags);
+	disable_device_dma(info, enable_dma_window);
 	info->dev->archdata.iommu_domain = NULL;
 	kmem_cache_free(iommu_devinfo_cache, info);
 	spin_unlock_irqrestore(&device_domain_lock, flags);
-- 
1.7.9.5

  parent reply	other threads:[~2013-10-16 11:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-16 11:22 [PATCH 0/3 v2] iommu/fsl: PAMU driver fixes Varun Sethi
2013-10-16 11:23 ` [PATCH 1/3 v2] iommu/fsl: Factor out PCI specific code Varun Sethi
2013-12-02 21:33   ` Alex Williamson
2013-10-16 11:23 ` Varun Sethi [this message]
2013-10-16 16:50   ` [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices Bhushan Bharat-R65777
2013-10-16 17:07     ` Sethi Varun-B16395
2013-10-16 17:13       ` Bhushan Bharat-R65777
2013-10-16 17:19         ` Sethi Varun-B16395
2013-10-16 17:21           ` Bhushan Bharat-R65777
2013-10-16 17:22             ` Sethi Varun-B16395
2013-12-02 21:33   ` Alex Williamson
2013-12-03 18:15     ` Varun Sethi
2013-12-03 18:34       ` Alex Williamson
2013-10-16 11:23 ` [PATCH 3/3] Add maintainers entry for the Freescale PAMU driver Varun Sethi
2013-10-17 13:47 ` [PATCH 0/3 v2] iommu/fsl: PAMU driver fixes Sethi Varun-B16395

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1381922582-28724-3-git-send-email-Varun.Sethi@freescale.com \
    --to=varun.sethi@freescale.com \
    --cc=alex.williamson@redhat.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=r65777@freescale.com \
    --cc=scottwood@freescale.com \
    --cc=stuart.yoder@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).