From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from quartz.orcorp.ca (quartz.orcorp.ca [184.70.90.242]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id 7BC6D2C0092 for ; Tue, 5 Nov 2013 11:27:44 +1100 (EST) From: Jason Gunthorpe To: Sebastian Hesselbarth Subject: [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode Date: Mon, 4 Nov 2013 17:27:19 -0700 Message-Id: <1383611239-14556-1-git-send-email-jgunthorpe@obsidianresearch.com> Cc: Andrew Lunn , Jason Cooper , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linuxppc-dev@lists.ozlabs.org, David Miller , Lennert Buytenhek List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Commit cc9d4598 'net: mv643xx_eth: use of_phy_connect if phy_node present' made the call to phy_scan optional, if the DT has a link to the phy node. However phy_scan has the side effect of calling phy_addr_set, which writes the phy MDIO address to the ethernet controller. If phy_addr_set is not called, and the bootloader has not set the correct address then the driver will fail to function. Tested on Kirkwood. Signed-off-by: Jason Gunthorpe --- Cc: David Miller Cc: Lennert Buytenhek Cc: Jason Cooper Cc: Andrew Lunn Cc: Benjamin Herrenschmidt Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org --- drivers/net/ethernet/marvell/mv643xx_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 2c210ec..00e43b5 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2890,6 +2890,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) PHY_INTERFACE_MODE_GMII); if (!mp->phy) err = -ENODEV; + phy_addr_set(mp, mp->phy->addr); } else if (pd->phy_addr != MV643XX_ETH_PHY_NONE) { mp->phy = phy_scan(mp, pd->phy_addr); -- 1.8.1.2