linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Shengzhou Liu <Shengzhou.Liu@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: scottwood@freescale.com, Liu Gang <Gang.Liu@freescale.com>,
	Shengzhou Liu <Shengzhou.Liu@freescale.com>
Subject: [PATCH 1/3] powerpc/85xx/dts: add third elo3 dma component
Date: Fri, 15 Nov 2013 19:22:40 +0800	[thread overview]
Message-ID: <1384514562-21137-1-git-send-email-Shengzhou.Liu@freescale.com> (raw)

Add elo3-dma-2.dtsi to support the third DMA controller.
This is used on T2080, T4240, etc.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
---
 arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi | 82 +++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
new file mode 100644
index 0000000..b89d816
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma2: dma@102300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x102300 0x4>,
+	      <0x102600 0x4>;
+	ranges = <0x0 0x102100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <256 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <257 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <258 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <259 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <260 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <261 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <262 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <263 2 0 0>;
+	};
+};
-- 
1.8.0

             reply	other threads:[~2013-11-15 12:08 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-15 11:22 Shengzhou Liu [this message]
2013-11-15 11:22 ` [PATCH 2/3] powerpc/fsl-booke: Add T2080QDS board support Shengzhou Liu
2013-11-15 11:22 ` [PATCH 3/3] powerpc/fsl-booke: Enable T2080QDS board Shengzhou Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384514562-21137-1-git-send-email-Shengzhou.Liu@freescale.com \
    --to=shengzhou.liu@freescale.com \
    --cc=Gang.Liu@freescale.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=scottwood@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).