From: Anatolij Gustschin <agust@denx.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH] powerpc/52xx: re-enable bestcomm driver in defconfigs
Date: Mon, 9 Dec 2013 22:15:44 +0100 [thread overview]
Message-ID: <1386623744-25970-1-git-send-email-agust@denx.de> (raw)
The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
arch/powerpc/configs/52xx/cm5200_defconfig | 3 ++-
arch/powerpc/configs/52xx/lite5200b_defconfig | 3 ++-
arch/powerpc/configs/52xx/motionpro_defconfig | 3 ++-
arch/powerpc/configs/52xx/pcm030_defconfig | 3 ++-
arch/powerpc/configs/52xx/tqm5200_defconfig | 3 ++-
arch/powerpc/configs/mpc5200_defconfig | 3 ++-
6 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 69b57da..0b88c7b 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
# CONFIG_PCI is not set
@@ -71,6 +70,8 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_STORAGE=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index f3638ae..104a332 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -15,7 +15,6 @@ CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_LITE5200=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SPARSE_IRQ=y
@@ -59,6 +58,8 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 0c7de96..0d13ad7 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
# CONFIG_PCI is not set
@@ -84,6 +83,8 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 22e7195..430aa18 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_100=y
@@ -87,6 +86,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_STORAGE=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 716a37b..7af4c5b 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -17,7 +17,6 @@ CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_PM=y
# CONFIG_PCI is not set
CONFIG_NET=y
@@ -86,6 +85,8 @@ CONFIG_USB_STORAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 6640a35..8b682d1c 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_LPBFIFO=m
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_SIMPLE_GPIO=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -125,6 +124,8 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
--
1.7.9.5
reply other threads:[~2013-12-09 21:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386623744-25970-1-git-send-email-agust@denx.de \
--to=agust@denx.de \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).