From: Michael Ellerman <mpe@ellerman.id.au>
To: <linuxppc-dev@ozlabs.org>
Cc: sukadev@linux.vnet.ibm.com, Anton Blanchard <anton@samba.org>,
mlpesant@us.ibm.com
Subject: [PATCH] powerpc/perf: Add Power8 cache & TLB events
Date: Fri, 24 Jan 2014 15:50:51 +1100 [thread overview]
Message-ID: <1390539051-3922-1-git-send-email-mpe@ellerman.id.au> (raw)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/perf/power8-pmu.c | 144 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 144 insertions(+)
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index a3f7abd..96cee20 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -25,6 +25,37 @@
#define PM_BRU_FIN 0x10068
#define PM_BR_MPRED_CMPL 0x400f6
+/* All L1 D cache load references counted at finish, gated by reject */
+#define PM_LD_REF_L1 0x100ee
+/* Load Missed L1 */
+#define PM_LD_MISS_L1 0x3e054
+/* Store Missed L1 */
+#define PM_ST_MISS_L1 0x300f0
+/* L1 cache data prefetches */
+#define PM_L1_PREF 0x0d8b8
+/* Instruction fetches from L1 */
+#define PM_INST_FROM_L1 0x04080
+/* Demand iCache Miss */
+#define PM_L1_ICACHE_MISS 0x200fd
+/* Instruction Demand sectors wriittent into IL1 */
+#define PM_L1_DEMAND_WRITE 0x0408c
+/* Instruction prefetch written into IL1 */
+#define PM_IC_PREF_WRITE 0x0408e
+/* The data cache was reloaded from local core's L3 due to a demand load */
+#define PM_DATA_FROM_L3 0x4c042
+/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */
+#define PM_DATA_FROM_L3MISS 0x300fe
+/* All successful D-side store dispatches for this thread */
+#define PM_L2_ST 0x17080
+/* All successful D-side store dispatches for this thread that were L2 Miss */
+#define PM_L2_ST_MISS 0x17082
+/* Total HW L3 prefetches(Load+store) */
+#define PM_L3_PREF_ALL 0x4e052
+/* Data PTEG reload */
+#define PM_DTLB_MISS 0x300fc
+/* ITLB Reloaded */
+#define PM_ITLB_MISS 0x400fc
+
/*
* Raw event encoding for POWER8:
@@ -557,6 +588,8 @@ static int power8_generic_events[] = {
[PERF_COUNT_HW_INSTRUCTIONS] = PM_INST_CMPL,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BRU_FIN,
[PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED_CMPL,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = PM_LD_REF_L1,
+ [PERF_COUNT_HW_CACHE_MISSES] = PM_LD_MISS_L1,
};
static u64 power8_bhrb_filter_map(u64 branch_sample_type)
@@ -596,6 +629,116 @@ static void power8_config_bhrb(u64 pmu_bhrb_filter)
mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter));
}
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
+ [ C(RESULT_MISS) ] = PM_LD_MISS_L1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_ST_MISS_L1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L1_PREF,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(L1I) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_INST_FROM_L1,
+ [ C(RESULT_MISS) ] = PM_L1_ICACHE_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L1_DEMAND_WRITE,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_IC_PREF_WRITE,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(LL) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_DATA_FROM_L3,
+ [ C(RESULT_MISS) ] = PM_DATA_FROM_L3MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L2_ST,
+ [ C(RESULT_MISS) ] = PM_L2_ST_MISS,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L3_PREF_ALL,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_DTLB_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_ITLB_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(BPU) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_BRU_FIN,
+ [ C(RESULT_MISS) ] = PM_BR_MPRED_CMPL,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(NODE) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+};
+
+#undef C
+
static struct power_pmu power8_pmu = {
.name = "POWER8",
.n_counter = 6,
@@ -611,6 +754,7 @@ static struct power_pmu power8_pmu = {
.flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB,
.n_generic = ARRAY_SIZE(power8_generic_events),
.generic_events = power8_generic_events,
+ .cache_events = &power8_cache_events,
.attr_groups = power8_pmu_attr_groups,
.bhrb_nr = 32,
};
--
1.8.3.2
reply other threads:[~2014-01-24 4:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390539051-3922-1-git-send-email-mpe@ellerman.id.au \
--to=mpe@ellerman.id.au \
--cc=anton@samba.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mlpesant@us.ibm.com \
--cc=sukadev@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox