From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, stable@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH 1/2] powerpc/thp: Fix crash on mremap
Date: Tue, 28 Jan 2014 17:52:41 +0530 [thread overview]
Message-ID: <1390911762-5659-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
This patch fix the below crash
NIP [c00000000004cee4] .__hash_page_thp+0x2a4/0x440
LR [c0000000000439ac] .hash_page+0x18c/0x5e0
...
Call Trace:
[c000000736103c40] [00001ffffb000000] 0x1ffffb000000(unreliable)
[437908.479693] [c000000736103d50] [c0000000000439ac] .hash_page+0x18c/0x5e0
[437908.479699] [c000000736103e30] [c00000000000924c] .do_hash_page+0x4c/0x58
On ppc64 we use the pgtable for storing the hpte slot information and
store address to the pgtable at a constant offset (PTRS_PER_PMD) from
pmd. On mremap, when we switch the pmd, we need to withdraw and deposit
the pgtable again, so that we find the pgtable at PTRS_PER_PMD offset
from new pmd.
We also want to move the withdraw and deposit before the set_pmd so
that, when page fault find the pmd as trans huge we can be sure that
pgtable can be located at the offset.
upstream SHA1: b3084f4db3aeb991c507ca774337c7e7893ed04f
for 3.13 stable series
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/pgtable-ppc64.h | 14 ++++++++++++++
include/asm-generic/pgtable.h | 12 ++++++++++++
mm/huge_memory.c | 14 +++++---------
3 files changed, 31 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 4a191c472867..d27960c89a71 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -558,5 +558,19 @@ extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
#define __HAVE_ARCH_PMDP_INVALIDATE
extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp);
+
+#define pmd_move_must_withdraw pmd_move_must_withdraw
+typedef struct spinlock spinlock_t;
+static inline int pmd_move_must_withdraw(spinlock_t *new_pmd_ptl,
+ spinlock_t *old_pmd_ptl)
+{
+ /*
+ * Archs like ppc64 use pgtable to store per pmd
+ * specific information. So when we switch the pmd,
+ * we should also withdraw and deposit the pgtable
+ */
+ return true;
+}
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index db0923458940..8e4f41d9af4d 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -558,6 +558,18 @@ static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
}
#endif
+#ifndef pmd_move_must_withdraw
+static inline int pmd_move_must_withdraw(spinlock_t *new_pmd_ptl,
+ spinlock_t *old_pmd_ptl)
+{
+ /*
+ * With split pmd lock we also need to move preallocated
+ * PTE page table if new_pmd is on different PMD page table.
+ */
+ return new_pmd_ptl != old_pmd_ptl;
+}
+#endif
+
/*
* This function is meant to be used by sites walking pagetables with
* the mmap_sem hold in read mode to protect against MADV_DONTNEED and
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 95d1acb0f3d2..5d80c53b87cb 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1502,19 +1502,15 @@ int move_huge_pmd(struct vm_area_struct *vma, struct vm_area_struct *new_vma,
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
pmd = pmdp_get_and_clear(mm, old_addr, old_pmd);
VM_BUG_ON(!pmd_none(*new_pmd));
- set_pmd_at(mm, new_addr, new_pmd, pmd_mksoft_dirty(pmd));
- if (new_ptl != old_ptl) {
- pgtable_t pgtable;
- /*
- * Move preallocated PTE page table if new_pmd is on
- * different PMD page table.
- */
+ if (pmd_move_must_withdraw(new_ptl, old_ptl)) {
+ pgtable_t pgtable;
pgtable = pgtable_trans_huge_withdraw(mm, old_pmd);
pgtable_trans_huge_deposit(mm, new_pmd, pgtable);
-
- spin_unlock(new_ptl);
}
+ set_pmd_at(mm, new_addr, new_pmd, pmd_mksoft_dirty(pmd));
+ if (new_ptl != old_ptl)
+ spin_unlock(new_ptl);
spin_unlock(old_ptl);
}
out:
--
1.8.5.3
next reply other threads:[~2014-01-28 12:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-28 12:22 Aneesh Kumar K.V [this message]
2014-01-28 12:22 ` [PATCH 2/2] Fix compile error of pgtable-ppc64.h Aneesh Kumar K.V
2014-01-29 18:45 ` Greg KH
2014-01-29 22:57 ` Benjamin Herrenschmidt
2014-01-30 12:34 ` Greg KH
2014-01-30 17:38 ` Aneesh Kumar K.V
2014-01-30 17:55 ` Greg KH
2014-01-30 18:03 ` Aneesh Kumar K.V
2014-01-30 20:59 ` Benjamin Herrenschmidt
2014-01-30 22:37 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390911762-5659-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).