From: Gavin Shan <shangw@linux.vnet.ibm.com>
To: linuxppc-dev@ozlabs.org
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Subject: [PATCH 2/5] powerpc/powernv: Remove PNV_EEH_STATE_REMOVED
Date: Tue, 25 Feb 2014 15:28:35 +0800 [thread overview]
Message-ID: <1393313318-6341-3-git-send-email-shangw@linux.vnet.ibm.com> (raw)
In-Reply-To: <1393313318-6341-1-git-send-email-shangw@linux.vnet.ibm.com>
The PHB state PNV_EEH_STATE_REMOVED maintained in pnv_phb isn't
so useful any more and it's duplicated to EEH_PE_ISOLATED. The
patch replaces PNV_EEH_STATE_REMOVED with EEH_PE_ISOLATED.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/eeh-ioda.c | 56 ++++++++---------------------
arch/powerpc/platforms/powernv/pci.h | 1 -
2 files changed, 15 insertions(+), 42 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index f514743..0d1d424 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -662,22 +662,6 @@ static void ioda_eeh_phb_diag(struct pci_controller *hose)
pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
}
-static int ioda_eeh_get_phb_pe(struct pci_controller *hose,
- struct eeh_pe **pe)
-{
- struct eeh_pe *phb_pe;
-
- phb_pe = eeh_phb_pe_get(hose);
- if (!phb_pe) {
- pr_warning("%s Can't find PE for PHB#%d\n",
- __func__, hose->global_number);
- return -EEXIST;
- }
-
- *pe = phb_pe;
- return 0;
-}
-
static int ioda_eeh_get_pe(struct pci_controller *hose,
u16 pe_no, struct eeh_pe **pe)
{
@@ -685,7 +669,8 @@ static int ioda_eeh_get_pe(struct pci_controller *hose,
struct eeh_dev dev;
/* Find the PHB PE */
- if (ioda_eeh_get_phb_pe(hose, &phb_pe))
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe)
return -EEXIST;
/* Find the PE according to PE# */
@@ -713,6 +698,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
{
struct pci_controller *hose;
struct pnv_phb *phb;
+ struct eeh_pe *phb_pe;
u64 frozen_pe_no;
u16 err_type, severity;
long rc;
@@ -729,10 +715,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
list_for_each_entry(hose, &hose_list, list_node) {
/*
* If the subordinate PCI buses of the PHB has been
- * removed, we needn't take care of it any more.
+ * removed or is exactly under error recovery, we
+ * needn't take care of it any more.
*/
phb = hose->private_data;
- if (phb->eeh_state & PNV_EEH_STATE_REMOVED)
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
continue;
rc = opal_pci_next_error(phb->opal_id,
@@ -765,12 +753,6 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
switch (err_type) {
case OPAL_EEH_IOC_ERROR:
if (severity == OPAL_EEH_SEV_IOC_DEAD) {
- list_for_each_entry(hose, &hose_list,
- list_node) {
- phb = hose->private_data;
- phb->eeh_state |= PNV_EEH_STATE_REMOVED;
- }
-
pr_err("EEH: dead IOC detected\n");
ret = EEH_NEXT_ERR_DEAD_IOC;
} else if (severity == OPAL_EEH_SEV_INF) {
@@ -783,17 +765,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
break;
case OPAL_EEH_PHB_ERROR:
if (severity == OPAL_EEH_SEV_PHB_DEAD) {
- if (ioda_eeh_get_phb_pe(hose, pe))
- break;
-
+ *pe = phb_pe;
pr_err("EEH: dead PHB#%x detected\n",
hose->global_number);
- phb->eeh_state |= PNV_EEH_STATE_REMOVED;
ret = EEH_NEXT_ERR_DEAD_PHB;
} else if (severity == OPAL_EEH_SEV_PHB_FENCED) {
- if (ioda_eeh_get_phb_pe(hose, pe))
- break;
-
+ *pe = phb_pe;
pr_err("EEH: fenced PHB#%x detected\n",
hose->global_number);
ret = EEH_NEXT_ERR_FENCED_PHB;
@@ -813,15 +790,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
* fenced PHB so that it can be recovered.
*/
if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) {
- if (!ioda_eeh_get_phb_pe(hose, pe)) {
- pr_err("EEH: Escalated fenced PHB#%x "
- "detected for PE#%llx\n",
- hose->global_number,
- frozen_pe_no);
- ret = EEH_NEXT_ERR_FENCED_PHB;
- } else {
- ret = EEH_NEXT_ERR_NONE;
- }
+ *pe = phb_pe;
+ pr_err("EEH: Escalated fenced PHB#%x "
+ "detected for PE#%llx\n",
+ hose->global_number,
+ frozen_pe_no);
+ ret = EEH_NEXT_ERR_FENCED_PHB;
} else {
pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
(*pe)->addr, (*pe)->phb->global_number);
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index cde1694..6870f60 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -83,7 +83,6 @@ struct pnv_eeh_ops {
};
#define PNV_EEH_STATE_ENABLED (1 << 0) /* EEH enabled */
-#define PNV_EEH_STATE_REMOVED (1 << 1) /* PHB removed */
#endif /* CONFIG_EEH */
--
1.7.10.4
next prev parent reply other threads:[~2014-02-25 7:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-25 7:28 [PATCH v3 0/5] EEH improvement Gavin Shan
2014-02-25 7:28 ` [PATCH 1/5] powerpc/eeh: Remove EEH_PE_PHB_DEAD Gavin Shan
2014-02-25 7:28 ` Gavin Shan [this message]
2014-02-25 7:28 ` [PATCH 3/5] powerpc/powernv: Move PNV_EEH_STATE_ENABLED around Gavin Shan
2014-02-25 7:28 ` [PATCH 4/5] powerpc/powernv: Dump PHB diag-data immediately Gavin Shan
2014-02-25 7:28 ` [PATCH 5/5] powerpc/powernv: Refactor PHB diag-data dump Gavin Shan
-- strict thread matches above, loose matches on Subject: below --
2014-02-21 11:53 [PATCH 1/5] powerpc/eeh: Remove EEH_PE_PHB_DEAD Gavin Shan
2014-02-21 11:53 ` [PATCH 2/5] powerpc/powernv: Remove PNV_EEH_STATE_REMOVED Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393313318-6341-3-git-send-email-shangw@linux.vnet.ibm.com \
--to=shangw@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).