[PATCH] powerpc/serial: Use saner flags when creating legacy ports

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

>From 6679ffd7d85fe8155172774d0ba3370be5e82d1d Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sat, 29 Mar 2014 08:38:36 +1100
Subject: 

We had a mix & match of flags used when creating legacy ports
depending on where we found them in the device-tree. Among others
we were missing UPF_SKIP_TEST for some kind of ISA ports which is
a problem as quite a few UARTs out there don't support the loopback
test (such as a lot of BMCs).

Let's pick the set of flags used by the SoC code and generalize it
which means autoconf, no loopback test, irq maybe shared and fixed
port.

Sending to stable as the lack of UPF_SKIP_TEST is breaking
serial on some machines so I want this back into distros

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: stable@vger.kernel.org
---
 arch/powerpc/kernel/legacy_serial.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 6f2a15c..085c919 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -48,6 +48,9 @@ static struct __initdata of_device_id legacy_serial_parents[] = {
 static unsigned int legacy_serial_count;
 static int legacy_serial_console = -1;
 
+static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+	UPF_SHARE_IRQ | UPF_FIXED_PORT;
+
 static unsigned int tsi_serial_in(struct uart_port *p, int offset)
 {
 	unsigned int tmp;
@@ -153,8 +156,6 @@ static int __init add_legacy_soc_port(struct device_node *np,
 {
 	u64 addr;
 	const u32 *addrp;
-	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
-		| UPF_FIXED_PORT;
 	struct device_node *tsi = of_get_parent(np);
 
 	/* We only support ports that have a clock frequency properly
@@ -185,9 +186,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	 * IO port value. It will be fixed up later along with the irq
 	 */
 	if (tsi && !strcmp(tsi->type, "tsi-bridge"))
-		return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+		return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
+				       NO_IRQ, legacy_port_flags, 0);
 	else
-		return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+		return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
+				       NO_IRQ, legacy_port_flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -233,7 +236,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 
 	/* Add port, irq will be dealt with later */
 	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
-			       taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0);
+			       taddr, NO_IRQ, legacy_port_flags, 0);
 
 }
 
@@ -306,7 +309,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	 * IO port value. It will be fixed up later along with the irq
 	 */
 	return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
-			       UPF_BOOT_AUTOCONF, np != pci_dev);
+			       legacy_port_flags, np != pci_dev);
 }
 #endif