From: Michael Ellerman <mpe@ellerman.id.au>
To: <linuxppc-dev@ozlabs.org>
Cc: Anton Blanchard <anton@samba.org>, dcb314@hotmail.com
Subject: [PATCH 5/5] powerpc/ftrace: Use pr_fmt() to namespace error messages
Date: Tue, 17 Jun 2014 16:15:36 +1000 [thread overview]
Message-ID: <1402985736-32180-5-git-send-email-mpe@ellerman.id.au> (raw)
In-Reply-To: <1402985736-32180-1-git-send-email-mpe@ellerman.id.au>
The printks() in our ftrace code have no prefix, so they appear on the
console with very little context, eg:
Branch out of range
Use pr_fmt() & pr_err() to add a prefix. While we're at it, collapse a
few split lines that don't need to be, and add a missing newline to one
message.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/kernel/ftrace.c | 43 ++++++++++++++++++++-----------------------
1 file changed, 20 insertions(+), 23 deletions(-)
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 96efc66..d178834 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -10,6 +10,8 @@
*
*/
+#define pr_fmt(fmt) "ftrace-powerpc: " fmt
+
#include <linux/spinlock.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
@@ -115,7 +117,7 @@ __ftrace_make_nop(struct module *mod,
/* Make sure that that this is still a 24bit jump */
if (!is_bl_op(op)) {
- printk(KERN_ERR "Not expected bl: opcode is %x\n", op);
+ pr_err("Not expected bl: opcode is %x\n", op);
return -EINVAL;
}
@@ -125,12 +127,12 @@ __ftrace_make_nop(struct module *mod,
pr_devel("ip:%lx jumps to %p", ip, tramp);
if (!is_module_trampoline(tramp)) {
- printk(KERN_ERR "Not a trampoline\n");
+ pr_err("Not a trampoline\n");
return -EINVAL;
}
if (module_trampoline_target(mod, tramp, &ptr)) {
- printk(KERN_ERR "Failed to get trampoline target\n");
+ pr_err("Failed to get trampoline target\n");
return -EFAULT;
}
@@ -139,8 +141,7 @@ __ftrace_make_nop(struct module *mod,
entry = ppc_global_function_entry((void *)addr);
/* This should match what was called */
if (ptr != entry) {
- printk(KERN_ERR "addr %lx does not match expected %lx\n",
- ptr, entry);
+ pr_err("addr %lx does not match expected %lx\n", ptr, entry);
return -EINVAL;
}
@@ -180,7 +181,7 @@ __ftrace_make_nop(struct module *mod,
/* Make sure that that this is still a 24bit jump */
if (!is_bl_op(op)) {
- printk(KERN_ERR "Not expected bl: opcode is %x\n", op);
+ pr_err("Not expected bl: opcode is %x\n", op);
return -EINVAL;
}
@@ -199,7 +200,7 @@ __ftrace_make_nop(struct module *mod,
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
- printk(KERN_ERR "Failed to read %lx\n", tramp);
+ pr_err("Failed to read %lx\n", tramp);
return -EFAULT;
}
@@ -210,7 +211,7 @@ __ftrace_make_nop(struct module *mod,
((jmp[1] & 0xffff0000) != 0x398c0000) ||
(jmp[2] != 0x7d8903a6) ||
(jmp[3] != 0x4e800420)) {
- printk(KERN_ERR "Not a trampoline\n");
+ pr_err("Not a trampoline\n");
return -EINVAL;
}
@@ -222,8 +223,7 @@ __ftrace_make_nop(struct module *mod,
pr_devel(" %lx ", tramp);
if (tramp != addr) {
- printk(KERN_ERR
- "Trampoline location %08lx does not match addr\n",
+ pr_err("Trampoline location %08lx does not match addr\n",
tramp);
return -EINVAL;
}
@@ -264,15 +264,13 @@ int ftrace_make_nop(struct module *mod,
*/
if (!rec->arch.mod) {
if (!mod) {
- printk(KERN_ERR "No module loaded addr=%lx\n",
- addr);
+ pr_err("No module loaded addr=%lx\n", addr);
return -EFAULT;
}
rec->arch.mod = mod;
} else if (mod) {
if (mod != rec->arch.mod) {
- printk(KERN_ERR
- "Record mod %p not equal to passed in mod %p\n",
+ pr_err("Record mod %p not equal to passed in mod %p\n",
rec->arch.mod, mod);
return -EINVAL;
}
@@ -309,25 +307,24 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
* just mask it out when doing the compare.
*/
if ((op[0] != 0x48000008) || ((op[1] & 0xffff0000) != 0xe8410000)) {
- printk(KERN_ERR "Unexpected call sequence: %x %x\n",
- op[0], op[1]);
+ pr_err("Unexpected call sequence: %x %x\n", op[0], op[1]);
return -EINVAL;
}
/* If we never set up a trampoline to ftrace_caller, then bail */
if (!rec->arch.mod->arch.tramp) {
- printk(KERN_ERR "No ftrace trampoline\n");
+ pr_err("No ftrace trampoline\n");
return -EINVAL;
}
/* Ensure branch is within 24 bits */
if (!create_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
- printk(KERN_ERR "Branch out of range");
+ pr_err("Branch out of range\n");
return -EINVAL;
}
if (patch_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
- printk(KERN_ERR "REL24 out of range!\n");
+ pr_err("REL24 out of range!\n");
return -EINVAL;
}
@@ -346,13 +343,13 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
/* It should be pointing to a nop */
if (op != PPC_INST_NOP) {
- printk(KERN_ERR "Expected NOP but have %x\n", op);
+ pr_err("Expected NOP but have %x\n", op);
return -EINVAL;
}
/* If we never set up a trampoline to ftrace_caller, then bail */
if (!rec->arch.mod->arch.tramp) {
- printk(KERN_ERR "No ftrace trampoline\n");
+ pr_err("No ftrace trampoline\n");
return -EINVAL;
}
@@ -360,7 +357,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
op = create_branch((unsigned int *)ip,
rec->arch.mod->arch.tramp, BRANCH_SET_LINK);
if (!op) {
- printk(KERN_ERR "REL24 out of range!\n");
+ pr_err("REL24 out of range!\n");
return -EINVAL;
}
@@ -398,7 +395,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
* already have a module defined.
*/
if (!rec->arch.mod) {
- printk(KERN_ERR "No module loaded\n");
+ pr_err("No module loaded\n");
return -EINVAL;
}
--
1.9.1
prev parent reply other threads:[~2014-06-17 6:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-17 6:15 [PATCH 1/5] powerpc: Add ppc_global_function_entry() Michael Ellerman
2014-06-17 6:15 ` [PATCH 2/5] powerpc/ftrace: Fix typo in mask of opcode Michael Ellerman
2014-06-17 6:15 ` [PATCH 3/5] powerpc/ftrace: Fix inverted check of create_branch() Michael Ellerman
2014-06-17 6:15 ` [PATCH 4/5] powerpc/ftrace: Fix nop of modules on 64bit LE (ABIv2) Michael Ellerman
2014-06-17 6:15 ` Michael Ellerman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402985736-32180-5-git-send-email-mpe@ellerman.id.au \
--to=mpe@ellerman.id.au \
--cc=anton@samba.org \
--cc=dcb314@hotmail.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).