From: Zhao Qiang <B45475@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>, <linux-can@vger.kernel.org>,
<wg@grandegger.com>, <mkl@pengutronix.de>, <B07421@freescale.com>
Cc: Zhao Qiang <B45475@freescale.com>
Subject: [PATCH 1/2] flexcan: add err_irq handler for flexcan
Date: Thu, 19 Jun 2014 15:46:12 +0800 [thread overview]
Message-ID: <1403163973-48239-1-git-send-email-B45475@freescale.com> (raw)
when flexcan is not physically linked, command 'cantest' will
trigger an err_irq, add err_irq handler for it.
Signed-off-by: Zhao Qiang <B45475@freescale.com>
---
drivers/net/can/flexcan.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index aaed97b..e3c6cfd 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -206,6 +206,7 @@ struct flexcan_priv {
void __iomem *base;
u32 reg_esr;
u32 reg_ctrl_default;
+ unsigned int err_irq;
struct clk *clk_ipg;
struct clk *clk_per;
@@ -654,6 +655,23 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t flexcan_err_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct flexcan_priv *priv = netdev_priv(dev);
+ struct flexcan_regs __iomem *regs = priv->base;
+ u32 reg_ctrl, reg_esr;
+
+ reg_esr = flexcan_read(®s->esr);
+ reg_ctrl = flexcan_read(®s->ctrl);
+ if (reg_esr & FLEXCAN_ESR_TX_WRN) {
+ flexcan_write(reg_esr & ~FLEXCAN_ESR_TX_WRN, ®s->esr);
+ flexcan_write(reg_ctrl & ~FLEXCAN_CTRL_ERR_MSK, ®s->ctrl);
+ netdev_err(dev, "No physical link!\n");
+ }
+ return IRQ_HANDLED;
+}
+
static void flexcan_set_bittiming(struct net_device *dev)
{
const struct flexcan_priv *priv = netdev_priv(dev);
@@ -860,6 +878,12 @@ static int flexcan_open(struct net_device *dev)
if (err)
goto out_close;
+ if (priv->err_irq)
+ err = request_irq(priv->err_irq, flexcan_err_irq, IRQF_SHARED,
+ dev->name, dev);
+ if (err)
+ goto out_close;
+
/* start chip and queuing */
err = flexcan_chip_start(dev);
if (err)
@@ -1007,7 +1031,7 @@ static int flexcan_probe(struct platform_device *pdev)
struct resource *mem;
struct clk *clk_ipg = NULL, *clk_per = NULL;
void __iomem *base;
- int err, irq;
+ int err, irq, err_irq;
u32 clock_freq = 0;
if (pdev->dev.of_node)
@@ -1034,6 +1058,10 @@ static int flexcan_probe(struct platform_device *pdev)
if (irq <= 0)
return -ENODEV;
+ err_irq = platform_get_irq(pdev, 1);
+ if (err_irq <= 0)
+ err_irq = 0;
+
base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -1057,6 +1085,7 @@ static int flexcan_probe(struct platform_device *pdev)
dev->flags |= IFF_ECHO;
priv = netdev_priv(dev);
+ priv->err_irq = err_irq;
priv->can.clock.freq = clock_freq;
priv->can.bittiming_const = &flexcan_bittiming_const;
priv->can.do_set_mode = flexcan_set_mode;
--
1.8.5
next reply other threads:[~2014-06-19 7:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-19 7:46 Zhao Qiang [this message]
2014-06-19 7:46 ` [PATCH 2/2] flexcan: add err interrupt for p1010rdb Zhao Qiang
2014-06-19 8:28 ` Marc Kleine-Budde
2014-06-19 8:28 ` [PATCH 1/2] flexcan: add err_irq handler for flexcan Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403163973-48239-1-git-send-email-B45475@freescale.com \
--to=b45475@freescale.com \
--cc=B07421@freescale.com \
--cc=linux-can@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mkl@pengutronix.de \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).