linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com>,
	Paul Mackerras <paulus@samba.org>,
	Preeti U Murthy <preeti@linux.vnet.ibm.com>,
	linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 3/9] powerpc/kvm/book3s_hv: Enable CPUs to run guest after waking up from fast-sleep
Date: Mon, 25 Aug 2014 23:31:07 +0530	[thread overview]
Message-ID: <1408989673-14137-4-git-send-email-shreyas@linux.vnet.ibm.com> (raw)
In-Reply-To: <1408989673-14137-1-git-send-email-shreyas@linux.vnet.ibm.com>

When guests have to be launched, the secondary threads which are offline
are woken up to run the guests. Today these threads wake up from nap
and check if they have to run guests. Now that the offline secondary
threads can go to fastsleep or going ahead a deeper idle state such as winkle,
add this check in the wakeup from any of the deep idle states path as well.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Suggested-by: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
[ Changelog added by <preeti@linux.vnet.ibm.com> ]
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 050f79a..c64f3cc0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -100,25 +100,8 @@ system_reset_pSeries:
 	SET_SCRATCH0(r13)
 #ifdef CONFIG_PPC_P7_NAP
 BEGIN_FTR_SECTION
-	/* Running native on arch 2.06 or later, check if we are
-	 * waking up from nap. We only handle no state loss and
-	 * supervisor state loss. We do -not- handle hypervisor
-	 * state loss at this time.
-	 */
-	mfspr	r13,SPRN_SRR1
-	rlwinm.	r13,r13,47-31,30,31
-	beq	9f
 
-	/* waking up from powersave (nap) state */
-	cmpwi	cr1,r13,2
-	/* Total loss of HV state is fatal, we could try to use the
-	 * PIR to locate a PACA, then use an emergency stack etc...
-	 * OPAL v3 based powernv platforms have new idle states
-	 * which fall in this catagory.
-	 */
-	bgt	cr1,8f
 	GET_PACA(r13)
-
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	li	r0,KVM_HWTHREAD_IN_KERNEL
 	stb	r0,HSTATE_HWTHREAD_STATE(r13)
@@ -131,13 +114,27 @@ BEGIN_FTR_SECTION
 1:
 #endif
 
+	/* Running native on arch 2.06 or later, check if we are
+	 * waking up from nap. We only handle no state loss and
+	 * supervisor state loss. We do -not- handle hypervisor
+	 * state loss at this time.
+	 */
+	mfspr	r13,SPRN_SRR1
+	rlwinm.	r13,r13,47-31,30,31
+	beq	9f
+
+	/* waking up from powersave (nap) state */
+	cmpwi	cr1,r13,2
+	GET_PACA(r13)
+
+	bgt	cr1,8f
+
 	beq	cr1,2f
 	b	power7_wakeup_noloss
 2:	b	power7_wakeup_loss
 
 	/* Fast Sleep wakeup on PowerNV */
-8:	GET_PACA(r13)
-	b 	power7_wakeup_tb_loss
+8:	b 	power7_wakeup_tb_loss
 
 9:
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-- 
1.9.0

  parent reply	other threads:[~2014-08-25 18:01 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-25 18:01 [PATCH 0/9] powerpc/powernv: Support for fastsleep and winkle Shreyas B. Prabhu
2014-08-25 18:01 ` [PATCH 1/9] powerpc/powernv: Enable Offline CPUs to enter deep idle states Shreyas B. Prabhu
2014-08-25 18:01 ` Shreyas B. Prabhu [this message]
2014-08-25 18:01 ` [PATCH 4/9] powerpc/powernv/cpuidle: Add workaround to enable fastsleep Shreyas B. Prabhu
2014-08-25 18:01 ` [PATCH 5/9] powerpc/powernv: Add OPAL call to save and restore Shreyas B. Prabhu
2014-08-25 18:01 ` [PATCH 6/9] powerpc: Adding macro for accessing Thread Switch Control Register Shreyas B. Prabhu
2014-08-25 18:01 ` [PATCH 7/9] powerpc/powernv: Add winkle infrastructure Shreyas B. Prabhu
2014-08-25 18:01 ` [PATCH 8/9] powerpc/powernv: Discover and enable winkle Shreyas B. Prabhu
2014-08-25 18:01 ` [PATCH 9/9] powerpc/powernv: Enter deepest supported idle state in offline Shreyas B. Prabhu
2014-09-11 15:17 ` [PATCH 0/9] powerpc/powernv: Support for fastsleep and winkle Shreyas B Prabhu
2014-09-18  3:11 ` Shreyas B Prabhu
2014-09-29 10:23   ` Shreyas B Prabhu
2014-09-29 23:28     ` Rafael J. Wysocki
2014-09-30  8:12       ` Shreyas B Prabhu
2014-09-30 20:13         ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1408989673-14137-4-git-send-email-shreyas@linux.vnet.ibm.com \
    --to=shreyas@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=paulus@samba.org \
    --cc=preeti@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).