linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: qiudayu@linux.vnet.ibm.com, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH 3/4] powerpc/powernv: Add error injection debugfs entry
Date: Tue, 26 Aug 2014 17:56:18 +1000	[thread overview]
Message-ID: <1409039779-392-4-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1409039779-392-1-git-send-email-gwshan@linux.vnet.ibm.com>

From: Mike Qiu <qiudayu@linux.vnet.ibm.com>

The patch adds debugfs file (/sys/kernel/debug/powerpc/PCIxxxx/
err_injct), which accepts following formated string, to support
error injection. It will be used to support userland utility
"errinjct" in future.

  "pe_no:0:function:address:mask" - 32-bits PCI errors
  "pe_no:1:function:address:mask" - 64-bits PCI errors

Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/eeh-ioda.c | 52 +++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 18099c5..4d40093 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -66,6 +66,54 @@ static struct notifier_block ioda_eeh_nb = {
 };
 
 #ifdef CONFIG_DEBUG_FS
+static ssize_t ioda_eeh_ei_write(struct file *filp,
+				 const char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+	struct pci_controller *hose = filp->private_data;
+	struct pnv_phb *phb = hose->private_data;
+	struct eeh_dev *edev;
+	struct eeh_pe *pe;
+	int pe_no, type, func;
+	unsigned long addr, mask;
+	char buf[50];
+	int ret;
+
+	if (!phb->eeh_ops || !phb->eeh_ops->err_inject)
+		return -ENXIO;
+
+	ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
+	if (!ret)
+		return -EFAULT;
+
+	/* Retrieve parameters */
+	ret = sscanf(buf, "%x:%x:%x:%lx:%lx",
+		     &pe_no, &type, &func, &addr, &mask);
+	if (ret != 5)
+		return -EINVAL;
+
+	/* Retrieve PE */
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+	edev->phb = hose;
+	edev->pe_config_addr = pe_no;
+	pe = eeh_pe_get(edev);
+	kfree(edev);
+	if (!pe)
+		return -ENODEV;
+
+	/* Do error injection */
+	ret = phb->eeh_ops->err_inject(pe, type, func, addr, mask);
+	return ret < 0 ? ret : count;
+}
+
+static const struct file_operations ioda_eeh_ei_fops = {
+	.open   = simple_open,
+	.llseek = no_llseek,
+	.write  = ioda_eeh_ei_write,
+};
+
 static int ioda_eeh_dbgfs_set(void *data, int offset, u64 val)
 {
 	struct pci_controller *hose = data;
@@ -152,6 +200,10 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
 	if (!phb->has_dbgfs && phb->dbgfs) {
 		phb->has_dbgfs = 1;
 
+		debugfs_create_file("err_injct", 0200,
+				    phb->dbgfs, hose,
+				    &ioda_eeh_ei_fops);
+
 		debugfs_create_file("err_injct_outbound", 0600,
 				    phb->dbgfs, hose,
 				    &ioda_eeh_outb_dbgfs_ops);
-- 
1.8.3.2

  parent reply	other threads:[~2014-08-26  7:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-26  7:56 [PATCH 0/4] powerpc/eeh: More precisely error injection Gavin Shan
2014-08-26  7:56 ` [PATCH 1/4] powerpc/powernv: Sync header with firmware Gavin Shan
2014-09-25  4:27   ` [1/4] " Michael Ellerman
2014-09-25  4:56     ` Gavin Shan
2014-09-26  6:48     ` Gavin Shan
2014-10-03  5:30     ` Stewart Smith
2014-10-03  6:40       ` Gavin Shan
2014-08-26  7:56 ` [PATCH 2/4] powerpc/eeh: Introduce eeh_ops::err_inject Gavin Shan
2014-09-24  2:23   ` [2/4] " Michael Ellerman
2014-08-26  7:56 ` Gavin Shan [this message]
2014-08-26  7:56 ` [PATCH 4/4] powerpc/powernv: Clear PAPR error injection registers Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409039779-392-4-git-send-email-gwshan@linux.vnet.ibm.com \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=qiudayu@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).