From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH 1/3] powerpc/powernv: Sync OpalPciResetScope with firmware
Date: Tue, 23 Sep 2014 11:09:02 +1000 [thread overview]
Message-ID: <1411434544-10025-1-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
The names of PCI reset scopes aren't sychronized with firmware.
The patch fixes it.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/opal.h | 9 ++++++---
arch/powerpc/platforms/powernv/eeh-ioda.c | 12 ++++++------
arch/powerpc/platforms/powernv/pci-ioda.c | 4 ++--
3 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9113653..bdf9f61 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -385,9 +385,12 @@ enum OpalM64EnableAction {
};
enum OpalPciResetScope {
- OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
- OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
- OPAL_PCI_IODA_TABLE_RESET = 6,
+ OPAL_RESET_PHB_COMPLETE = 1,
+ OPAL_RESET_PCI_LINK = 2,
+ OPAL_RESET_PHB_ERROR = 3,
+ OPAL_RESET_PCI_HOT = 4,
+ OPAL_RESET_PCI_FUNDAMENTAL = 5,
+ OPAL_RESET_PCI_IODA_TABLE = 6
};
enum OpalPciReinitScope {
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 729e445..f248586 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -514,11 +514,11 @@ int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
if (option == EEH_RESET_FUNDAMENTAL ||
option == EEH_RESET_HOT)
rc = opal_pci_reset(phb->opal_id,
- OPAL_PHB_COMPLETE,
+ OPAL_RESET_PHB_COMPLETE,
OPAL_ASSERT_RESET);
else if (option == EEH_RESET_DEACTIVATE)
rc = opal_pci_reset(phb->opal_id,
- OPAL_PHB_COMPLETE,
+ OPAL_RESET_PHB_COMPLETE,
OPAL_DEASSERT_RESET);
if (rc < 0)
goto out;
@@ -558,15 +558,15 @@ static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
*/
if (option == EEH_RESET_FUNDAMENTAL)
rc = opal_pci_reset(phb->opal_id,
- OPAL_PCI_FUNDAMENTAL_RESET,
+ OPAL_RESET_PCI_FUNDAMENTAL,
OPAL_ASSERT_RESET);
else if (option == EEH_RESET_HOT)
rc = opal_pci_reset(phb->opal_id,
- OPAL_PCI_HOT_RESET,
+ OPAL_RESET_PCI_HOT,
OPAL_ASSERT_RESET);
else if (option == EEH_RESET_DEACTIVATE)
rc = opal_pci_reset(phb->opal_id,
- OPAL_PCI_HOT_RESET,
+ OPAL_RESET_PCI_HOT,
OPAL_DEASSERT_RESET);
if (rc < 0)
goto out;
@@ -697,7 +697,7 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
(option == EEH_RESET_HOT ||
option == EEH_RESET_FUNDAMENTAL)) {
rc = opal_pci_reset(phb->opal_id,
- OPAL_PHB_ERROR,
+ OPAL_RESET_PHB_ERROR,
OPAL_ASSERT_RESET);
if (rc != OPAL_SUCCESS) {
pr_warn("%s: Failure %lld clearing "
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index df241b1..36b1a7a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1627,7 +1627,7 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
static void pnv_pci_ioda_shutdown(struct pnv_phb *phb)
{
- opal_pci_reset(phb->opal_id, OPAL_PCI_IODA_TABLE_RESET,
+ opal_pci_reset(phb->opal_id, OPAL_RESET_PCI_IODA_TABLE,
OPAL_ASSERT_RESET);
}
@@ -1803,7 +1803,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
pci_add_flags(PCI_REASSIGN_ALL_RSRC);
/* Reset IODA tables to a clean state */
- rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
+ rc = opal_pci_reset(phb_id, OPAL_RESET_PCI_IODA_TABLE, OPAL_ASSERT_RESET);
if (rc)
pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
--
1.8.3.2
next reply other threads:[~2014-09-23 1:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-23 1:09 Gavin Shan [this message]
2014-09-23 1:09 ` [PATCH 2/3] powerpc/eeh: Tag reset state for user owned PE Gavin Shan
2014-09-23 1:09 ` [PATCH 3/3] powerpc/eeh: Emulate EEH recovery for VFIO devices Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411434544-10025-1-git-send-email-gwshan@linux.vnet.ibm.com \
--to=gwshan@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).