From: Michael Neuling <mikey@neuling.org>
To: greg@kroah.com, arnd@arndb.de, mpe@ellerman.id.au,
benh@kernel.crashing.org
Cc: cbe-oss-dev@lists.ozlabs.org, mikey@neuling.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
imunsie@au.ibm.com, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org, jk@ozlabs.org, anton@samba.org
Subject: [PATCH v3 08/16] powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts
Date: Tue, 7 Oct 2014 21:48:14 +1100 [thread overview]
Message-ID: <1412678902-18672-9-git-send-email-mikey@neuling.org> (raw)
In-Reply-To: <1412678902-18672-1-git-send-email-mikey@neuling.org>
From: Ian Munsie <imunsie@au1.ibm.com>
This adds a number of functions for allocating IRQs under powernv PCIe for cxl.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/pnv-pci.h | 27 ++++++
arch/powerpc/platforms/powernv/pci-ioda.c | 153 ++++++++++++++++++++++++++++++
2 files changed, 180 insertions(+)
create mode 100644 arch/powerpc/include/asm/pnv-pci.h
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
new file mode 100644
index 0000000..71717b5
--- /dev/null
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2014 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PNV_PCI_H
+#define _ASM_PNV_PCI_H
+
+#include <linux/pci.h>
+#include <misc/cxl.h>
+
+int pnv_phb_to_cxl(struct pci_dev *dev);
+int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
+ unsigned int virq);
+int pnv_cxl_alloc_hwirqs(struct pci_dev *dev, int num);
+void pnv_cxl_release_hwirqs(struct pci_dev *dev, int hwirq, int num);
+int pnv_cxl_alloc_hwirq_ranges(struct cxl_irq_ranges *irqs,
+ struct pci_dev *dev, int num);
+void pnv_cxl_release_hwirq_ranges(struct cxl_irq_ranges *irqs,
+ struct pci_dev *dev);
+int pnv_cxl_get_irq_count(struct pci_dev *dev);
+
+#endif
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index baf3de6..3b67010b 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -38,6 +38,8 @@
#include <asm/debug.h>
#include <asm/firmware.h>
+#include <misc/cxl.h>
+
#include "powernv.h"
#include "pci.h"
@@ -1329,6 +1331,157 @@ static void set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq)
irq_set_chip(virq, &phb->ioda.irq_chip);
}
+#ifdef CONFIG_CXL_BASE
+
+struct device_node *pnv_pci_to_phb_node(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+ return hose->dn;
+}
+EXPORT_SYMBOL(pnv_pci_to_phb_node);
+
+int pnv_phb_to_cxl(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pnv_ioda_pe *pe;
+ int rc;
+
+ pe = pnv_ioda_get_pe(dev);
+ if (!pe)
+ return -ENODEV;
+
+ pe_info(pe, "Switching PHB to CXL\n");
+
+ rc = opal_pci_set_phb_cxl_mode(phb->opal_id, 1, pe->pe_number);
+ if (rc)
+ dev_err(&dev->dev, "opal_pci_set_phb_cxl_mode failed: %i\n", rc);
+
+ return rc;
+}
+EXPORT_SYMBOL(pnv_phb_to_cxl);
+
+/* Find PHB for cxl dev and allocate MSI hwirqs?
+ * Returns the absolute hardware IRQ number
+ */
+int pnv_cxl_alloc_hwirqs(struct pci_dev *dev, int num)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ int hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, num);
+
+ if (hwirq < 0) {
+ dev_warn(&dev->dev, "Failed to find a free MSI\n");
+ return -ENOSPC;
+ }
+
+ return phb->msi_base + hwirq;
+}
+EXPORT_SYMBOL(pnv_cxl_alloc_hwirqs);
+
+void pnv_cxl_release_hwirqs(struct pci_dev *dev, int hwirq, int num)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq - phb->msi_base, num);
+}
+EXPORT_SYMBOL(pnv_cxl_release_hwirqs);
+
+void pnv_cxl_release_hwirq_ranges(struct cxl_irq_ranges *irqs,
+ struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ int i, hwirq;
+
+ for (i = 1; i < CXL_IRQ_RANGES; i++) {
+ if (!irqs->range[i])
+ continue;
+ pr_devel("cxl release irq range 0x%x: offset: 0x%lx limit: %ld\n",
+ i, irqs->offset[i],
+ irqs->range[i]);
+ hwirq = irqs->offset[i] - phb->msi_base;
+ msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq,
+ irqs->range[i]);
+ }
+}
+EXPORT_SYMBOL(pnv_cxl_release_hwirq_ranges);
+
+int pnv_cxl_alloc_hwirq_ranges(struct cxl_irq_ranges *irqs,
+ struct pci_dev *dev, int num)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ int i, hwirq, try;
+
+ memset(irqs, 0, sizeof(struct cxl_irq_ranges));
+
+ /* 0 is reserved for the multiplexed PSL DSI interrupt */
+ for (i = 1; i < CXL_IRQ_RANGES && num; i++) {
+ try = num;
+ while (try) {
+ hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, try);
+ if (hwirq >= 0)
+ break;
+ try /= 2;
+ }
+ if (!try)
+ goto fail;
+
+ irqs->offset[i] = phb->msi_base + hwirq;
+ irqs->range[i] = try;
+ pr_devel("cxl alloc irq range 0x%x: offset: 0x%lx limit: %li\n",
+ i, irqs->offset[i], irqs->range[i]);
+ num -= try;
+ }
+ if (num)
+ goto fail;
+
+ return 0;
+fail:
+ pnv_cxl_release_hwirq_ranges(irqs, dev);
+ return -ENOSPC;
+}
+EXPORT_SYMBOL(pnv_cxl_alloc_hwirq_ranges);
+
+int pnv_cxl_get_irq_count(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ return phb->msi_bmp.irq_count;
+}
+EXPORT_SYMBOL(pnv_cxl_get_irq_count);
+
+int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
+ unsigned int virq)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ unsigned int xive_num = hwirq - phb->msi_base;
+ struct pnv_ioda_pe *pe;
+ int rc;
+
+ if (!(pe = pnv_ioda_get_pe(dev)))
+ return -ENODEV;
+
+ /* Assign XIVE to PE */
+ rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
+ if (rc) {
+ pe_warn(pe, "%s: OPAL error %d setting msi_base 0x%x "
+ "hwirq 0x%x XIVE 0x%x PE\n",
+ pci_name(dev), rc, phb->msi_base, hwirq, xive_num);
+ return -EIO;
+ }
+ set_msi_irq_chip(phb, virq);
+
+ return 0;
+}
+EXPORT_SYMBOL(pnv_cxl_ioda_msi_setup);
+#endif
+
static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
unsigned int hwirq, unsigned int virq,
unsigned int is_64, struct msi_msg *msg)
--
1.9.1
next prev parent reply other threads:[~2014-10-07 10:49 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 10:48 [PATCH v3 0/16] POWER8 Coherent Accelerator device driver Michael Neuling
2014-10-07 10:48 ` [PATCH v3 01/16] powerpc/cell: Move spu_handle_mm_fault() out of cell platform Michael Neuling
2014-10-07 11:08 ` Stephen Rothwell
2014-10-07 11:34 ` Michael Neuling
2014-10-07 10:48 ` [PATCH v3 02/16] powerpc/cell: Move data segment faulting code " Michael Neuling
2014-10-07 10:48 ` [PATCH v3 03/16] powerpc/cell: Make spu_flush_all_slbs() generic Michael Neuling
2014-10-07 10:48 ` [PATCH v3 04/16] powerpc/msi: Improve IRQ bitmap allocator Michael Neuling
2014-10-07 10:48 ` [PATCH v3 05/16] powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize Michael Neuling
2014-10-07 10:48 ` [PATCH v3 06/16] powerpc/powernv: Split out set MSI IRQ chip code Michael Neuling
2014-10-07 10:48 ` [PATCH v3 07/16] cxl: Add new header for call backs and structs Michael Neuling
2014-10-07 10:48 ` Michael Neuling [this message]
2014-10-07 22:59 ` [v3, 08/16] powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts Michael Ellerman
2014-10-08 0:46 ` Michael Neuling
2014-10-07 10:48 ` [PATCH v3 09/16] powerpc/mm: Add new hash_page_mm() Michael Neuling
2014-10-07 10:48 ` [PATCH v3 10/16] powerpc/opal: Add PHB to cxl mode call Michael Neuling
2014-10-07 10:48 ` [PATCH v3 11/16] powerpc/mm: Add hooks for cxl Michael Neuling
2014-10-07 10:48 ` [PATCH v3 12/16] cxl: Add base builtin support Michael Neuling
2014-10-07 23:04 ` [v3,12/16] " Michael Ellerman
2014-10-08 0:45 ` Michael Neuling
2014-10-07 10:48 ` [PATCH v3 13/16] cxl: Driver code for powernv PCIe based cards for userspace access Michael Neuling
2014-10-07 10:48 ` [PATCH v3 14/16] cxl: Userspace header file Michael Neuling
2014-10-07 10:48 ` [PATCH v3 15/16] cxl: Add driver to Kbuild and Makefiles Michael Neuling
2014-10-07 10:48 ` [PATCH v3 16/16] cxl: Add documentation for userspace APIs Michael Neuling
2014-10-08 5:36 ` [v3,16/16] " Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412678902-18672-9-git-send-email-mikey@neuling.org \
--to=mikey@neuling.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=cbe-oss-dev@lists.ozlabs.org \
--cc=greg@kroah.com \
--cc=imunsie@au.ibm.com \
--cc=jk@ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mpe@ellerman.id.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).