From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org
Cc: shuahkh@osg.samsung.com, mikey@neuling.org,
james.hogan@imgtec.com, avagin@openvz.org,
Paul.Clothier@imgtec.com, peterz@infradead.org,
palves@redhat.com, oleg@redhat.com, davem@davemloft.net,
dhowells@redhat.com, kirjanov@gmail.com, davej@redhat.com,
akpm@linux-foundation.org, sukadev@linux.vnet.ibm.com,
tglx@linutronix.de, sam.bobroff@au1.ibm.com
Subject: [PATCH V7 4/8] powerpc, ptrace: Enable vr_(get/set) for transactional memory
Date: Wed, 14 Jan 2015 12:38:46 +0530 [thread overview]
Message-ID: <1421219330-19984-5-git-send-email-khandual@linux.vnet.ibm.com> (raw)
In-Reply-To: <1421219330-19984-1-git-send-email-khandual@linux.vnet.ibm.com>
This patch enables the vr_get which gets the running value of all
the VMX registers and the vr_set which sets the running value of
of all the VMX registers to accommodate in transaction ptrace
interface based requests.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
arch/powerpc/kernel/ptrace.c | 94 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 91 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index fd36b32..2bbbd10 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -523,10 +523,30 @@ static int vr_active(struct task_struct *target,
return target->thread.used_vr ? regset->n : 0;
}
+/*
+ * vr_get
+ *
+ * When the transaction is active, 'transact_vr' holds the current running
+ * value of all the VMX registers and 'vr_state' holds the last checkpointed
+ * value of all the VMX registers for the current transaction to fall back
+ * on in case it aborts. When transaction is not active 'vr_state' holds
+ * the current running state of all the VMX registers. So this function which
+ * gets the current running values of all the VMX registers, needs to know
+ * whether any transaction is active or not.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ * };
+ */
static int vr_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
+ struct thread_vr_state *addr;
int ret;
flush_altivec_to_thread(target);
@@ -534,8 +554,19 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
offsetof(struct thread_vr_state, vr[32]));
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
+ flush_fp_to_thread(target);
+ flush_tmregs_to_thread(target);
+ addr = &target->thread.transact_vr;
+ } else {
+ addr = &target->thread.vr_state;
+ }
+#else
+ addr = &target->thread.vr_state;
+#endif
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
+ addr, 0,
33 * sizeof(vector128));
if (!ret) {
/*
@@ -546,7 +577,16 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
u32 word;
} vrsave;
memset(&vrsave, 0, sizeof(vrsave));
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ if (MSR_TM_ACTIVE(target->thread.regs->msr))
+ vrsave.word = target->thread.transact_vrsave;
+ else
+ vrsave.word = target->thread.vrsave;
+#else
vrsave.word = target->thread.vrsave;
+#endif
+
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
33 * sizeof(vector128), -1);
}
@@ -554,10 +594,30 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
return ret;
}
+/*
+ * vr_set
+ *
+ * When the transaction is active, 'transact_vr' holds the current running
+ * value of all the VMX registers and 'vr_state' holds the last checkpointed
+ * value of all the VMX registers for the current transaction to fall back
+ * on in case it aborts. When transaction is not active 'vr_state' holds
+ * the current running state of all the VMX registers. So this function which
+ * sets the current running values of all the VMX registers, needs to know
+ * whether any transaction is active or not.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ * };
+ */
static int vr_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
+ struct thread_vr_state *addr;
int ret;
flush_altivec_to_thread(target);
@@ -565,8 +625,19 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
offsetof(struct thread_vr_state, vr[32]));
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
+ flush_fp_to_thread(target);
+ flush_tmregs_to_thread(target);
+ addr = &target->thread.transact_vr;
+ } else {
+ addr = &target->thread.vr_state;
+ }
+#else
+ addr = &target->thread.vr_state;
+#endif
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
+ addr, 0,
33 * sizeof(vector128));
if (!ret && count > 0) {
/*
@@ -577,11 +648,28 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
u32 word;
} vrsave;
memset(&vrsave, 0, sizeof(vrsave));
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ if (MSR_TM_ACTIVE(target->thread.regs->msr))
+ vrsave.word = target->thread.transact_vrsave;
+ else
+ vrsave.word = target->thread.vrsave;
+#else
vrsave.word = target->thread.vrsave;
+#endif
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
33 * sizeof(vector128), -1);
- if (!ret)
+ if (!ret) {
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ if (MSR_TM_ACTIVE(target->thread.regs->msr))
+ target->thread.transact_vrsave = vrsave.word;
+ else
+ target->thread.vrsave = vrsave.word;
+#else
target->thread.vrsave = vrsave.word;
+#endif
+ }
}
return ret;
--
1.9.3
next prev parent reply other threads:[~2015-01-14 7:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 7:08 [PATCH V7 0/8] Add new powerpc specific ELF core notes Anshuman Khandual
2015-01-14 7:08 ` [PATCH V7 1/8] elf: Add new powerpc specifc core note sections Anshuman Khandual
2015-01-14 7:08 ` [PATCH V7 2/8] powerpc, process: Add the function flush_tmregs_to_thread Anshuman Khandual
2015-01-14 7:08 ` [PATCH V7 3/8] powerpc, ptrace: Enable fpr_(get/set) for transactional memory Anshuman Khandual
2015-01-14 7:08 ` Anshuman Khandual [this message]
2015-01-14 7:08 ` [PATCH V7 5/8] powerpc, ptrace: Enable support for transactional memory register sets Anshuman Khandual
2015-01-14 7:08 ` [PATCH V7 6/8] powerpc, ptrace: Enable support for miscellaneous debug registers Anshuman Khandual
2015-01-14 7:08 ` [PATCH V7 7/8] selftests, powerpc: Add test case for TM related ptrace interface Anshuman Khandual
2015-01-14 7:08 ` [PATCH V7 8/8] selftests: Make GIT ignore all binaries in powerpc test suite Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421219330-19984-5-git-send-email-khandual@linux.vnet.ibm.com \
--to=khandual@linux.vnet.ibm.com \
--cc=Paul.Clothier@imgtec.com \
--cc=akpm@linux-foundation.org \
--cc=avagin@openvz.org \
--cc=davej@redhat.com \
--cc=davem@davemloft.net \
--cc=dhowells@redhat.com \
--cc=james.hogan@imgtec.com \
--cc=kirjanov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mikey@neuling.org \
--cc=oleg@redhat.com \
--cc=palves@redhat.com \
--cc=peterz@infradead.org \
--cc=sam.bobroff@au1.ibm.com \
--cc=shuahkh@osg.samsung.com \
--cc=sukadev@linux.vnet.ibm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).