Re: [RFC 00/10] Freescale DPAA B/QMan drivers

[Joakim Tjernlund <joakim.tjernlund@transmode.se>]

On Fri, 2015-02-20 at 09:43 -0500, Bob Cochran wrote:
> On 02/05/2015 10:52 AM, Emil Medve wrote:
> > Hello Bob,
> >=20
> >=20
> > On 02/05/2015 09:48 AM, Bob Cochran wrote:
> > > On 02/04/2015 09:48 AM, Emil Medve wrote:
> > > >=20
> > > > Hello,
> > > >=20
> > > >=20
> > > > This is the first attempt to publish the Freescale DPAA B/QMan driv=
ers. They are
> > > > not to be applied yet.  At this stage, this is more or less the dri=
vers from the
> > > > Freescale PowerPC SDK roughly squashed and split in a sequence of c=
omponent
> > > > patches. They still needs some work and cleanup before we expect to=
 have them
> > > > applied, but we appreciate early feedback
> > >=20
> > >=20
> > > Hi Emil,
> > >=20
> > > I had thought to try to apply these patches and build it, but I won't=
 get very far using it without=20
> > > FMAN (on my t1040).   I searched through the mail archives and didn't=
 find FMAN patches other than for=20
> > > the device tree.   I also don't see it in the mainline tree.
> > >=20
> > > If FMAN patches have already been submitted, please point me to it.
> > >=20
> > > If not, then please let me know when we will see code to support FMAN=
.
> >=20
> > Let me inquire with the FMan guy here. I'll get back to you on this, ho=
wever, don't hold your breath.=20
> > There might be some weeks before the FMan driver will hit the e-mail li=
sts
>=20
>=20
> Hi Emil,
>=20
> Were you able to obtain information on when we'll see the FMAN driver pat=
ches submitted?  I would like to=20
> be able to work with FSL DPAA on mainline.
>=20
> Thanks,
>=20
> Bob

Me too! I am happy just to get a normal ethernet interface though.

 Jocke