From: "Cédric Le Goater" <clg@fr.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: "Stewart Smith" <stewart@linux.vnet.ibm.com>,
lm-sensors@lm-sensors.org, "Cédric Le Goater" <clg@fr.ibm.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Neelesh Gupta" <neelegup@linux.vnet.ibm.com>,
skiboot@lists.ozlabs.org, "Jean Delvare" <jdelvare@suse.de>
Subject: [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support
Date: Fri, 20 Feb 2015 16:07:34 +0100 [thread overview]
Message-ID: <1424444857-13805-1-git-send-email-clg@fr.ibm.com> (raw)
In-Reply-To: <1423117857-32759-1-git-send-email-clg@fr.ibm.com>
Hello !
These patches rework the ibmpowernv driver to support the new device
tree as proposed by this patchset on the skiboot mailing list :
https://lists.ozlabs.org/pipermail/skiboot/2015-February/000457.html
They are based on Linux 3.19 and were tested on IBM Power and Open Power
systems running trusty.
The main issue is that the new device tree is incompatible with the
previous ibmpowernv drivers. The consequence is no powernv sensors
on systems with such a opal/linux configuration.
Cheers,
C.
Cédric Le Goater (3):
powerpc/powernv: Check OPAL sensor calls exist
powerpc/powernv: handle OPAL_SUCCESS return in opal_sensor_read
hwmon: (ibmpowernv) add DTS support
arch/powerpc/platforms/powernv/opal-sensor.c | 32 ++-
drivers/hwmon/ibmpowernv.c | 336 ++++++++++++++------------
2 files changed, 202 insertions(+), 166 deletions(-)
--
1.7.10.4
next parent reply other threads:[~2015-02-20 15:11 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1423117857-32759-1-git-send-email-clg@fr.ibm.com>
2015-02-20 15:07 ` Cédric Le Goater [this message]
2015-02-20 16:52 ` [RFC PATCH 0/3] hwmon: (ibmpowernv) add DTS support Guenter Roeck
2015-02-20 20:15 ` Cedric Le Goater
2015-02-20 23:52 ` Guenter Roeck
2015-02-21 7:14 ` Cedric Le Goater
2015-02-21 11:03 ` Guenter Roeck
2015-02-23 10:54 ` Cedric Le Goater
2015-02-20 15:07 ` [RFC PATCH 1/3] powerpc/powernv: Check OPAL sensor calls exist Cédric Le Goater
2015-02-20 16:53 ` Guenter Roeck
2015-02-20 20:18 ` Cedric Le Goater
2015-02-24 4:54 ` Michael Ellerman
2015-02-25 17:28 ` Cedric Le Goater
2015-02-20 15:07 ` [RFC PATCH 2/3] powerpc/powernv: handle OPAL_SUCCESS return in opal_sensor_read Cédric Le Goater
2015-02-20 15:07 ` [RFC PATCH 3/3] hwmon: (ibmpowernv) add DTS support Cédric Le Goater
2015-03-18 15:47 ` [PATCH 0/5] hwmon: (ibmpowernv) remove dependency on OPAL index Cédric Le Goater
2015-03-19 4:05 ` Guenter Roeck
2015-03-18 15:47 ` [PATCH 1/5] hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP Cédric Le Goater
2015-03-18 15:47 ` [PATCH 2/5] hwmon: (ibmpowernv) add a get_sensor_type() routine Cédric Le Goater
2015-03-18 15:47 ` [PATCH 3/5] hwmon: (ibmpowernv) add a convert_opal_attr_name() routine Cédric Le Goater
2015-03-19 3:58 ` Guenter Roeck
2015-03-18 15:47 ` [PATCH 4/5] hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype Cédric Le Goater
2015-03-19 4:02 ` Guenter Roeck
2015-03-18 15:47 ` [PATCH 5/5] hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names Cédric Le Goater
2015-03-19 17:44 ` [PATCH v2 0/5] hwmon: (ibmpowernv) remove dependency on OPAL index Cédric Le Goater
2015-03-20 15:26 ` Guenter Roeck
2015-03-20 16:52 ` Cedric Le Goater
2015-04-01 10:15 ` [PATCH 0/4] hwmon: (ibmpowernv) add DTS support Cédric Le Goater
2015-04-01 10:15 ` [PATCH 1/4] hwmon: (ibmpowernv) add a helper routine create_hwmon_attr Cédric Le Goater
2015-04-01 10:15 ` [PATCH 2/4] hwmon: (ibmpowernv) add support for the new device tree Cédric Le Goater
2015-04-01 10:15 ` [PATCH 3/4] hwmon: (ibmpowernv) add a label attribute Cédric Le Goater
2015-04-01 10:15 ` [PATCH 4/4] hwmon: (ibmpowernv) pretty print labels Cédric Le Goater
2015-04-03 15:49 ` Guenter Roeck
2015-04-07 14:42 ` Cedric Le Goater
2015-04-07 14:45 ` Cédric Le Goater
2015-04-07 16:44 ` Guenter Roeck
2015-04-07 18:03 ` Cedric Le Goater
2015-04-07 19:22 ` Guenter Roeck
2015-04-08 6:57 ` Cedric Le Goater
2015-04-07 20:22 ` [Skiboot] " Benjamin Herrenschmidt
2015-03-19 17:44 ` [PATCH v2 1/5] hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP Cédric Le Goater
2015-03-19 17:44 ` [PATCH v2 2/5] hwmon: (ibmpowernv) add a get_sensor_type() routine Cédric Le Goater
2015-03-19 17:44 ` [PATCH v2 3/5] hwmon: (ibmpowernv) add a convert_opal_attr_name() routine Cédric Le Goater
2015-03-19 17:44 ` [PATCH v2 4/5] hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype Cédric Le Goater
2015-03-20 8:06 ` Cedric Le Goater
2015-03-20 15:27 ` Guenter Roeck
2015-03-19 17:44 ` [PATCH v2 5/5] hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424444857-13805-1-git-send-email-clg@fr.ibm.com \
--to=clg@fr.ibm.com \
--cc=jdelvare@suse.de \
--cc=linux@roeck-us.net \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lm-sensors@lm-sensors.org \
--cc=neelegup@linux.vnet.ibm.com \
--cc=skiboot@lists.ozlabs.org \
--cc=stewart@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).